Predicting future quantities of obsolete household appliances in Nanjing by a stock-based model

China has become one of the largest producers of obsolete household appliances (HAs) in the world. However, information on discarded HAs in China is deficient owing to the unavailability of reliable data. The estimation of future obsolete streams is a crucial issue for the establishment of efficient waste collection and recycling systems. The present study describes a prediction model to forecast future obsolete HAs on the basis of information of in-use stocks of HAs in households. The model was applied to a forecasting analysis of quantities of obsolete HAs from 2009 to 2050 in Nanjing, China. The results show that a total of about 76 million units (2.8 million tonnes) of obsolete HAs will be generated in Nanjing over the next 40 years. Discarded air conditioners, color TV sets, and personal computers will be the major contributors. The total discarded amount of major kinds of HAs will increase from nearly 1.0 million units in 2009 to a maximum of 2.1 million units in 2040, and then decrease slightly to 2.0 million units in 2050. Urban households will generate significantly more obsolete HAs (about 56 million units) than rural households, due to the difference in their HA possession levels. The results of this study should help the Nanjing municipality to develop the collection and recycling systems and facilities needed for the obsolete HAs generated in the future. From a methodological perspective, the stock-based model provides a suitable tool to predict the generation of discarded HAs in the future.     

基于物料衡算法的复杂化工过程产排污量核算软件的开发及应用

物料衡算法是污染源普查技术规定的污染物排放量核算的一种重要方法,但对于复杂的化工过程,物料衡算法的难度和计算工作量均很大,难以为基层环境监察人员掌握和运用,同时运用物料衡算进行污染物排放量核算的可靠性,也很难保证。结合排污量核定实践,综合进行物料衡算的技巧和一般方法,科学地模化物质转化转移过程,以此为基础,应用Visual Basic高级计算机语言编制了针对复杂化工过程的物料衡算计算软件,并以沈阳某制药有限公司的脑复康生产过程为原型,利用实测资料对计算模型进行了验证,应用该软件计算某制药厂VC生产线等4条生产线的产排污量核算。该软件应用简便,可以方便快捷地进行复杂化工过程的物料衡算,并可以分析生产过程中的主要产污环节,为提高清洁生产水平提供科学依据。     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

酸雨对材料腐蚀模拟实验箱的研制

为了确定材料腐蚀速率与降水酸度和气体污染物SO₂浓度的定量关系,并建立材料损伤函数,设计并制造了酸雨对材料腐蚀模拟实验箱。该实验箱可以模拟不同的气候以及不同的环境条件。实验结果表明:该装置完全适用于大气污染物的干湿沉降对材料影响的研究。      

Female seed beetles, <Emphasis Type="Italic">Callosobruchus maculatus,</Emphasis> remate for male-supplied water rather than ejaculate nutrition

Female seed beetles, Callosobruchus maculatus, mate multiply even though association with males and copulations carry costs, such as injury to the genital tract. Multiple mating (polyandry) may, however, offset these costs through the acquisition of food and water, two material benefits hypothesized to be obtained from the large ejaculates produced by males. The material benefits hypothesis can be tested by increasing female access to nutrients and water, with the prediction that female mating frequency will decrease as copulation is no longer required to derive these materials. Females were given water, 5% sugar–water or baker’s yeast, and were compared with females deprived of these. We presented females with virgin males daily for 8 days and recorded female mating frequency, survivorship, and fecundity. Females provided with water and sugar–water decreased mating frequency. Thus, water, rather than nutrients in the ejaculate, appears to be important to females of this species. In addition, both life span and fecundity were extended for females in the sugar–water and water treatments. Since water is scarce in the arid environment in which this species is found, we conclude that polyandry provides material benefits to females that may offset some of the costs of associating with males.     

微生物燃料电池中产电微生物电子传递研究进展

微生物燃料电池集产电和污水净化为一体,作为一种新型的能源回收技术得到人们的广泛关注。从微生物燃料电池工作原理来看,电子能否顺利地传递到阳极表面对于电流的产生起着关键作用。因此,本文重点阐述了电子在产电微生物体内产生的途径、电子从微生物体内向阳极传递的不同方式以及阳极材料对产电微生物附着和电子传递的影响。从生物化学、电化学和材料学上对产电微生物体内的电子到阳极整个过程进行全面的综述。明确电子传递的关键环节,为新型高效阳极材料的开发提供思路。     

湿地生态地球化学研究进展

湿地生态地球化学研究是湿地研究的核心内容之一, 是研究其物理过程、化学过程和生物过程及其相互关系以及这些过程与湿地功能的关系.回顾了近年来国内外湿地生态地球化学方面的研究成果,介绍了它的概念,并评述了湿地的生态功能、元素地球化学、生物地球化学、湿地模型和3S技术等新技术在湿地研究中的应用等方面的研究进展.提出了中国湿地生态地球化学研究的优先领域,应加强湿地基础理论研究及在湿地的演化、生态过程、界面过程、预测与评价、信息系统等方面的研究.     

加氢装置分液罐泄漏失效原因分析

针对某石油化工公司加氢装置中变气第一分液罐底部环焊缝周围产生多处裂纹而发生泄漏的事故,通过对该压力容器使用工作环境的工况调查、设备泄漏部位裂纹宏观分析、裂纹形态及断口理化金相分析、材质化学成分检测、焊接接头金相组织分析、材料拉伸力学性能试验和硬度测试等手段,综合分析裂纹产生的原因,得出初步结论,并提出改进建议.     

空气过滤技术研究综述

文章分别从空气过滤材料、空气过滤器、空气过滤理论及空气过滤技术的应用等四个方面,对空气过滤技术进行了详细阐述.总结了空气过滤材料、空气过滤器的分类及研究进展、空气过滤器的过滤机理及过滤理论的发展.介绍了空气过滤技术的主要应用,并指出了空气过滤技术的发展动向和市场趋势.