燃煤电厂海水烟气脱硫工艺原理初探

海水烟气脱硫工艺是利用天然的纯海水（燃煤电厂可直接利用电厂的冷却循环水）作为烟气中ＳＯ２的吸收剂，无需其它任何添加剂，也不产生任何废弃物，具有技术成熟、工艺简单、系统运行可靠、脱硫效率高（理论脱硫效率可达９８％）和投资运行费用低等特点，目前在一些国家和地区已得到日益广泛的应用。本文是在部分模拟试验的基础上，对海水烟气脱硫工艺进行了简单的阐述。     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

Kitchen waste valorization through a mild-temperature pretreatment to enhance biogas production and fermentability: Kinetics study in mesophilic and thermophilic regimen

Biowaste valorization through anaerobic digestion is an attractive option to achieve both climate protection goals and renewable energy production. In this paper, a complete set of batch trials was carried out on kitchen waste to investigate the effects of mild thermal pretreatment, temperature regimen and substrate/inoculum ratio. Thermal pretreatment was effective in the solubilisation of macromolecular fractions, particularly carbohydrates. The ability of the theoretical methodologies in estimating hydrogen and methane yields of complex substrates was evaluated by comparing the experimental results with the theoretical values. Despite the single batch configuration, a significant initial hydrogen production was observed, prior to methane yield. Main pretreatment effect was the gain in hydrogen production; the extent was highly variable according to the other parameters values. High hydrogen yields, up to 113 mL H2/g VSfed, were related to the prompt transformation of soluble sugars. Thermophilic regimen resulted, as expected, in faster digestions (up to 78 mL CH₄/gVS/day) and sorted out pH inhibition. The relatively low methane yields (342–398 mL CH₄/g VS_fed) were the result of the consistent lignocellulosic content and low lipid content. Thermal pretreatment proved to be a promising option for the enhancement of hydrogen production in food waste dark fermentation.     

建设项目审批数据管理系统的设计与实现

本系统根据葫芦岛市环境保护的需要,整合各种环境保护建设项目审批数据,建立Oracle数据仓库,利用PowerBuilder技术完成对环境保护建设项目数据的管理、统计与发布。     

铝型材挤压模具的失效分析

根据铝型材挤压模具的服役条件,采用宏观与微观相结合的分析方法,分析现场挤压模具的失效形式、失效性质和失效原因,并提出了提高模具使用寿命的一些措施.     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

环境税收制度的效益分析及其对比优势探讨

环境税收制度是未来中国环境政策改革的突破口，相对于其它的环境政策如排污收费与排污权交易等，环境税收其经济效益与环境效益明显，开征环境税收有重要的意义，但在短期内，我国实施环境税收制度的条件尚不成熟，环境政策体系应该采取税费并存，并逐步过渡到以环境税为主的方式。     

热解析气相色谱法测定土壤中苯系物

建立了用热解析气相色谱法测定土壤中苯系物的方法.采用保留时间定性,外标法定量.方法检出限分别为:苯1.8 μg·L-1、甲苯3.5 μg·L-1、乙苯7.0 μg·L-1、间二甲苯8.6 μg·L-1、对二甲苯8.6 μg·L-1、邻二甲苯9.8 μg·L-1、苯乙烯10.0 μg·L-1;加标回收率在79%～100%之间,相对标准偏差为1.5%～3.9%.方法操作简便,快速,灵敏度高,能适应现代化的应急监测.     

城市污水厂污泥热干燥处理技术及其应用分析

提出采用热干燥处理技术进一步降低脱水泥饼的含水率，介绍了现行的污泥热干燥处理技术，并就该技术在污泥处理中的应用尤其是在焚烧预处理中的应用进行了分析。