A closer look at BLEVE overpressure

The overpressure produced by the boiling liquid expanding vapor explosion (BLEVE) is still not well understood. Various methods have been published on the overpressure modeling in the far field. They mostly differ by the modeling of the expansion energy, used to scale the distance to the source where the overpressure needs to be calculated. But these methods usually include a experimentally fitted reduction factor, and are mostly overestimating the overpressures. Today there is a growing interest in modeling the BLEVE overpressure in the near field, for studying the blast effect on critical infrastructure such as bridges and buildings. This requires a much better understanding of the BLEVE blast. This paper goes deeper in the understanding of the physical phenomenon leading to the BLEVE blast wave generation and propagation. First, mid-scale BLEVE experiments in addition to new experimental data for near field blast from a small scale supercritical BLEVE are analyzed. And second, an analysis method of the shocks observed in the experiments is presented based on fundamental gas dynamics, and allows the elaboration of a new modeling approach for BLEVE overpressure, based on the calculation of the initial overpressure and radius of the blast.     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

Kitchen waste valorization through a mild-temperature pretreatment to enhance biogas production and fermentability: Kinetics study in mesophilic and thermophilic regimen

Biowaste valorization through anaerobic digestion is an attractive option to achieve both climate protection goals and renewable energy production. In this paper, a complete set of batch trials was carried out on kitchen waste to investigate the effects of mild thermal pretreatment, temperature regimen and substrate/inoculum ratio. Thermal pretreatment was effective in the solubilisation of macromolecular fractions, particularly carbohydrates. The ability of the theoretical methodologies in estimating hydrogen and methane yields of complex substrates was evaluated by comparing the experimental results with the theoretical values. Despite the single batch configuration, a significant initial hydrogen production was observed, prior to methane yield. Main pretreatment effect was the gain in hydrogen production; the extent was highly variable according to the other parameters values. High hydrogen yields, up to 113 mL H2/g VSfed, were related to the prompt transformation of soluble sugars. Thermophilic regimen resulted, as expected, in faster digestions (up to 78 mL CH₄/gVS/day) and sorted out pH inhibition. The relatively low methane yields (342–398 mL CH₄/g VS_fed) were the result of the consistent lignocellulosic content and low lipid content. Thermal pretreatment proved to be a promising option for the enhancement of hydrogen production in food waste dark fermentation.     

弹射起飞和拦阻着陆冲击试验方法探讨

目的研究舰载机机载装备弹射起飞和拦阻着陆冲击试验的工程实现方法。方法从GJB 150.18A—2009、MIL-STD-810F/G及其提供的实测数据出发,分析弹射起飞和拦阻着陆冲击载荷特征,对几种常用试验方法的工程实现进行探讨和比较。结果弹射起飞和拦阻着陆冲击具有瞬态、交变、低频、大位移、高速度等特征。阻尼正弦波方法的实施路径比较明确,复杂波形再现方法实施路径比较模糊且复杂,超长脉冲半正弦波方法具有多种局限性,前两种方法的速度、位移都较大。结论阻尼正弦波方法较复杂波形再现方法更容易实现,但两者都需要大位移、高速度的专用冲击试验设备和适当的波形处理技术,超长脉冲半正弦波方法在前面两种标准推荐方法能够实现时,不建议使用。     

温度、盐度、铜、氨对对虾仔虾(Penaues orientalis K)和光滑河兰蛤(Potamocorbula laevis)的影响

在室内模拟条件下,进行了热冲击及其与盐度、铜、氨联合对对虾仔虾和光滑河兰蛤的急性影响研究。结果表明,两种动物的起始致死温度(TL₅₀)和最高临界温度(CTM)随驯化温度的升高而增大;随盐度的降低,仔虾的耐高温能力明显降低,而兰蛤对盐度变化反应不明显;高温明显提高铜、氨对仔虾的毒性。也提高铜对兰蛤的毒性,但降低氨对兰蛤的毒性影响。仔虾对高温、低盐、铜离子及非离子氨反应敏感。     

铝型材挤压模具的失效分析

根据铝型材挤压模具的服役条件,采用宏观与微观相结合的分析方法,分析现场挤压模具的失效形式、失效性质和失效原因,并提出了提高模具使用寿命的一些措施.     

热解析气相色谱法测定土壤中苯系物

建立了用热解析气相色谱法测定土壤中苯系物的方法.采用保留时间定性,外标法定量.方法检出限分别为:苯1.8 μg·L-1、甲苯3.5 μg·L-1、乙苯7.0 μg·L-1、间二甲苯8.6 μg·L-1、对二甲苯8.6 μg·L-1、邻二甲苯9.8 μg·L-1、苯乙烯10.0 μg·L-1;加标回收率在79%～100%之间,相对标准偏差为1.5%～3.9%.方法操作简便,快速,灵敏度高,能适应现代化的应急监测.     

城市污水厂污泥热干燥处理技术及其应用分析

提出采用热干燥处理技术进一步降低脱水泥饼的含水率，介绍了现行的污泥热干燥处理技术，并就该技术在污泥处理中的应用尤其是在焚烧预处理中的应用进行了分析。     

Comparison of mesophilic and thermophilic anaerobic digestions of thermal hydrolysis pretreated swine manure: Process performance, microbial communities and energy balance

Anaerobic digestion (AD) of swine manure (SM) commonly shows low biogas output and unsatisfactory economic performance. In this study, thermophilic AD (TAD, 50 ± 1 °C) was combined with thermal hydrolysis pretreatment (THP, 170 °C/10 bar), to investigate its potential for maximizing biogas yield, securing successful digestion and microbial diversity, as well as improving energy balance. Four lab-scale continuously stirred tank reactors were operated for 300 days and compared with each other, i.e., reactor 1 (raw SM fed in mesophilic AD: RSM-MAD), reactor 2 (THP-treated SM fed in MAD: TSM-MAD), reactor 3 (RSM-TAD), and reactor 4 (TSM-TAD). The results showed that THP was efficient to increase methane production of SM, TSM-TAD mode led to the highest methane yield (129.8 ± 40.5 mL-CH₄/g-VS/day) among the tests (p < 0.05). Although TAD was more likely to induce free ammonia (> 700 mg/L) or volatile fatty acids (> 6000 mg/L) accumulation compared with MAD in start-up phase, TSM-TAD treatment mode behaved a sustainable digestion process in a long-term operation. For TSM-TAD scenario, higher Shannon–Weaver (3.873) and lower Simpson index (0.061) indicated this mode ensured and enlarged the diversity of bacteria communities. Phylum Bathyarchaeota was dominant (59.3%−90.0%) in archaea community, followed by Euryarchaeota in the four reactors. RSM-MAD treatment mode achieved the highest energy output (4.65 GJ/day), TSM-TAD was less effective (−17.38 GJ/day) due to increased energy demands. Thus improving the energetic efficiency of THP units is recommended for the development of TSM-TAD treatment mode.     

城市户外热环境的舒适性研究

介绍了户外热环境舒适性评价的几种方法，提出了户外热环境舒适评价指标OTCD，指出了在室内OTCD能与PMV很好吻合，并且OTCD的各项参数便于测量。