自备发电站噪声综合控制

本文对自备发电站噪声污染综合控制进行了论述，拟出了有效控制措施。通过工程实例证明，自备发电站噪声污染扰民问题，能够得到有效的控制和解决。     

上海磁悬浮快速列车环境振动影响探讨

通过对磁悬浮快速列车沿线两侧区域振动监测,得出振动级VLzmax与列车速度有较好的相关性,实测得出了振动随车速变化的衰减系数。同时给出了振动随离轨道距离变化的衰减方程,参照现有环境振动国家标准,给出了不同车速下磁悬浮轨道两侧区域的振动达标距离。     

振动试验数据管理系统概述

随着近些年振动试验技术的快速发展,对于振动试验数据的保存、管理和统计提出了更高的要求。鉴于此,附属于试验室信息管理系统的振动试验数据管理系统作为振动试验有效的管理工具,必然会成为提升试验室振动试验能力、规范试验技术的有效工具。     

桥梁抗震主动控制的稳定性研究

主动控制应用于实际结构 ,需要考虑其控制效果的稳定性问题 ,为此 ,分析了桥梁抗震主动控制中可能出现的计算模型误差和系统误差 ,并讨论了应用H2 控制和H∞ 控制两种算法的稳定性。理论分析和仿真计算表明 ,在频谱特性不同的地震激励下 ,H2 控制和H∞ 控制两种算法都可以取得满意的控制效果 ;对于计算模型误差 ,H2 控制和H∞ 控制两种算法的鲁棒性相当 ,控制效果稳定 ;对于系统误差 ,H∞ 控制算法比H2 控制算法鲁棒性强 ,在较大的误差下可以保持控制效果的稳定性     

岩溶区隧道爆破开挖地震危害控制的研究

隧道爆破开挖是爆破安全工程问题 ,也是工程质量安全问题 ,从长远考虑更是安全及环保问题 ,因震害的潜隐性和危害性 ,必须对其从宏观与微观、工程及周边环境全面考虑。笔者结合爆破作用下微裂纹扩展机理的分析 ,将爆破震速耦合到裂纹损伤断裂条件中 ,得到爆破震动的安全控制标准计算公式 ,结合工程实例 ,给出了不同条件下岩溶区隧道爆破开挖安全控制的建议标准 ,并且提出了爆破地震危害的控制措施 ,为类似工程提供参考。     

A methodology for assessment of long-term exposure to whole-body vibrations in vehicle drivers to propose preventive safety measures

Introduction: The appearance of musculoskeletal disorders (MDs) in professional drivers due to exposition to whole-body vibration (WBV) makes it relevant to assess this exposure. The European Directive 2002/44/EC has two methods to evaluate exposure to WBV (defined in ISO2631-1:2008). These methods evaluate the exposure associated with an 8-hour working day; however, MDs due to WBV could also be caused by accumulated exposure to vibrations over long term, and hence, the methods defined in the European directive may be limited in their ability to ensure the safety of workers exposed to WBV throughout their years of employment. Method: A detailed comparison and discussion of methods defined in the European Directive and the ISO2631-5:2018 was used as a starting point of the main results of this paper. On this basis, a new methodology for the management and organization of preventive measures is proposed to consider the assessment of ISO2631-5:2018 standard and the full working life of workers. Experimental data to assess exposure to WBV in heavy equipment vehicle (HEV) drivers under different road surface conditions and range of velocities were considered to illustrate the process of the proposed methodology. Results: The methods defined in the standards provide different assessments leading to a different possible consideration of safe operations when the risks associated with them may actually be high. The proposed methodology can be used with the aim of ensuring safety of workers throughout their working lives and providing an easy implementation of the calculations of ISO2631-5:2018 standard. Conclusions: A procedure to assess the health risk probability to which the HEV worker is exposed in terms of the exposure years and a different range of operational vehicle speeds is proposed and exemplified with a study case. Practical applications: This study provides a practical tool for the management of WBV exposure related to work-tasks in HEV drivers. Safety managers should consider the global exposition to WBV throughout their working life, and this research provides an easy tool to accomplish it.     

Vibrational energy loss analysis in battery tab ultrasonic welding

In ultrasonic metal welding processes, high-frequency ultrasonic energy is used to generate friction and heat at the interface between weld parts to produce solid-state bonds. It has been observed that sufficient energy is required to produce proper bonding, while excessive energy can cause such quality issues as weld fracture and perforation. Therefore, it is important to have a product/process design in ultrasonic welding to ensure efficient energy conversion from ultrasonics to welding energy, minimizing energy loss in the process. In this work, vibrational energy loss associated with the longitudinal and flexural vibrations of the Cu coupon during ultrasonic welding is studied by applying one-dimensional continuous vibration models. To facilitate our modeling, experimental results from the free response of Cu coupon were obtained to determine the damping characteristics of the Cu coupon in the welding process. Our analysis shows that substantial energy loss can occur during welding due to the flexural vibration of the Cu coupon, especially when the overhang (the upper part of the Cu coupon extended from the anvil) of the Cu coupon resonates at or close to the welding frequency (about 20 kHz), degrading the weld quality of battery tabs. This study contributes to understanding the fundamental dynamics of the Cu coupon during ultrasonic welding and its impact on weld quality.     

给水管道振动信号的小波分析及消振研究

某核发电厂部分蒸汽和给水管道振动情况非常严重 ,以致影响到正常的安全生产。笔者从给水管道的测振出发 ,并利用 3层Daubechise对振动信号进行了小波消噪、滤波、重构处理 ,以找到影响管系振动的激励源的主要频域成分。进而利用比较成熟的结构分析软件ANSYS对管系进行了模态分析 ,得到系统的低阶固有频率和振型。根据管道振动的原因 ,在不改变管系主要特征的基础上 ,给出了简单易行的消振措施 ,实际运行情况表明消振方法效果良好。     

混合质量阻尼器(HMD)抗震控制研究

建筑物的倒塌是地震造成破坏的主要形式之一 ,它导致大量的人员和财产损失。不断改进建筑物的抗震设计方法是传统的抗震减灾措施。随着结构振动控制领域的不断发展 ,它为建筑抗震减灾提供了一个新的途径。根据建筑结构抗震设计“三水准”的设防准则 ,混合质量阻尼器 (HybridMassDamper ,HMD)被应用于建筑抗震减灾中 ,对于发生频度较高的低烈度地震 ,主要通过调谐质量阻尼器 (TunedMassDamper ,TMD)控制结构的振动 ;而当发生烈度较高的地震或TMD不能满足控制目标要求时 ,启动作动器施加主动控制力 ,用主动控制力驱动TMD的附加质量块 ,提供给主结构更大的控制力 ,把TMD转化为主动质量阻尼器 (ActiveMassDemper ,AMD) ,取得预期的控制效果。理论分析和仿真计算表明 ,HMD适用地震激励的范围广 ,控制效果显著     

丰镇发电厂送风系统噪声原因分析及降噪研究

振动和噪声普遍存在于火电厂锅炉送风系统中 ,是电厂噪声污染的一个重要来源 ,严重影响电厂安全、经济、文明运行。有效地降低送风系统的振动和噪声是火电厂急需解决的问题。笔者针对丰镇火电厂送风系统结构和运行参数 ,对由此产生的噪声进行了细致的测量 ,分析了产生振动和噪声的原因 ,认为送风机蜗舌处产生的气动噪声和管道二次涡流是引发送风系统振动和噪声的主要原因。根据产生振动和噪声的原因 ,并结合电厂要求 ,进行了技术改造即在直管中安装栅格网及弯管处安装导流栅以消除局部涡流。技术改造方案实施后经测量的结果表明 ,冷风道的噪声下降了 7～ 1 6dB ,明显降低了送风系统的振动和噪声。