北京市发展CNG汽车的条件与前景分析

北京市汽车排放污染物贡献率已达到：HC73.5％，CO63．4％，NOx46％。用CNG代替汽油作汽车燃料，可使CO减少97％、HC减少72％、NOx减少39％、CO2减少24％、SO2减少90％。建立CNG加气站和CNG汽车改装这两个CNG应用关键问题在技术上、经济上都是可行的。北京市CNG燃料来源有保障。北京市车辆都比较适合使用CNG气体燃料。北京有很强的CNG汽车产业科技力量。对北京市当前发展CNG汽车产业提出了一些建议。     

Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

环境水体中痕量酚类化合物气相色谱-质谱联用测定法研究

建立了液-液萃取-气相色谱/质谱联用仪测定环境水体中痕量酚类化合物的方法。用乙酸乙酯萃取环境水中的痕量酚类化合物,加入萘-d8作为内标,利用气相色谱-质谱联用仪选择离子监测(SIM)的方式进行检测,内标法定量,定性、定量准确,线性响应良好,回归曲线的相关系数均>0.999,平均回收率在89.4%~104%之间,精密度好,相对标准偏差<7.4%;抗干扰能力强,检测灵敏度高,水样中最低检测浓度可达0.001mg/L,经实际样品测定完全能满足环境水体中痕量酚类化合物监测的要求。     

膜、柱串联固相萃取-高效液相色谱法测定水中多环芳烃(PAHs)的研究

建立了用膜-柱串联固相萃取(SPE)技术,甲醇和水作为流动相进行梯度洗脱,紫外和荧光检测器串联的高效液相色谱法(HPLC)分析水中EPA优先监控的16种PAHs的方法.     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

固相萃取-气相色谱法测定水中硝基苯类有机污染物的方法研究

建立了固相萃取、毛细柱气相色谱-电子捕获检测器定量分析水中硝基苯类化合物的分析方法。通过对固相萃取柱的选择、固相萃取条件(样品溶液的pH值、上样速度、上样体积、洗脱液选择及配比)的优化,得出了最佳实验条件。穿透体积可达1.5L,回收率在80%~105%,最小检出浓度在0.00037~0.072μg/L之间,均大大低于GB13194-91的规定。相对标准偏差在0.7%~5.3%之间。该方法准确、简单,重现性好、回收率高,污染小。     

气相和颗粒物中邻苯二甲酸酯的采样与检测技术

对邻苯二甲酸酯的性质及其在环境空气中的存在状态、样品采集技术与分析方法进行了综述,侧重介绍了样品的采集、净化、采样效率和采样与分析全过程的质量控制。     

助催化无汞盐快速测定水中化学需氧量

在ψ（Ｈ２ＳＯ４）＝５６％硫酸介质，重铬酸钾的氧化体系中，以钼权铵，硫酸铝钾为助催化剂，可减少量化剂硫酸银的用量，消解１５ｍｉｎ即可测定水中化学需氧量，用硝酸银溶液代替硫酸汞去除水氯离子，避免了汞盐的污染，工业废水回收率在９７％～１０１％之间，有较好的准确度。     

环境中萘和甲基萘的气相色谱测定

针对发生的甲基萘油车泄漏事故进行了水样和空气样品中萘和甲基萘的测定，水样中直接进样，对空气样品则以甲醇为吸收液吸收，富集，氢火焰毛细管色谱法测定。     

用液相催化法和脱硫除尘器脱除烟气中SO_2

在由旋风水膜和两块旋流塔板组成的处理气量为７５０ｍ￣３／ｈ的二级脱硫除尘器中，进行了用含催化剂Ｍｎ￣（２＋）的水溶液吸收ＳＯ_２的扩大试验。结果表明，在确定的条件下，脱硫率达到７３％，板效率为０．２５～０．２８。在同一设备中同时完成除尘与脱硫过程，设备投资少；以水为吸收剂，运行费用低；中性条件下吸收，长期运转不结垢，可靠性高。