螯合纤维的合成及其吸附重金属离子的研究

研究了含有胺肟基和胺腙基功能纤维的合成、结构表征和螯合性能。新型合纤维对多种重金属离子具有良好的吸附性能，能从被污染的水体和土壤中去除重金属离子，经洗脱后可回收金属，螯合纤维能反复使用。     

离子色谱法在石化工业废水分析中的应用

用IC-6离子色谱分析仪，研究石化工业废水中阴离子的测定技术，并首次建立炼油、化肥外排废水中F^-、Cl^-、NO2^-、PO4^3-、NO3^-、SO4^2-等阴离子含量测定的岗位。以含0．0054mol／L碳酸氢钠和0．0050mol／L碳酸钠为淋洗液，在电流70mA、流速1．5mL／min、泵压0～42MPa的条件下，测得各阴离子的相关系数均大于0．995、相对标准偏差（RSD）〈5．00％、加标回收率为95％～116％。     

电极流动分析仪的研制和应用

采用固定电极测试状态的方法，将流动技术引入到离子电极直接电位分析法中，设计并试制了电极流动分析仪。配用市售硝酸根电极、钠电极、氟电极、氯电极和氨电极进行了环境样品的测定。结果表明，电极流动分析仪法的分析速度比直接电位法提高２－３倍，变异系数，２．９％－５．０％之间，回收率在９０％－１０５％之间；直接电位法变异系数在２．３％－６．７％之间，加收率在９０％－１０９％之间。     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

Study of cyanide removal from contaminated water using zinc peroxide nanomaterial

The present study highlights the potential application of zinc peroxide(ZnO_2)nanomaterial as an efficient material for the decontamination of cyanide from contaminated water. A process patent for ZnO_2 synthesis has been granted in United States of America(US Patent number 8,715,612; May 2014),South Africa,Bangladesh,and India. The ZnO_2 nanomaterial was capped with polyvinylpyrrolidone(PVP)to control the particle size. The PVP capped ZnO_2nanomaterial(PVP-ZnO_2)before and after adsorption of cyanide was characterized by scanning electron microscope,transmission electron microscope,X-ray diffractometer,Fourier transform infrared spectroscopy and time of flight-secondary ion mass spectrometry. The remaining concentration of cyanide after adsorption by PVP-ZnO_2 was determined using ion chromatograph. The adsorption of cyanide over PVP-ZnO_2 was also studied as a function of p H,adsorbent dose,time and concentration of cyanide. The maximum removal of cyanide was observed in p H range 5.8–7.8 within 15 min. The adsorption data was fitted to Langmuir and Fruendlich isotherm and it has been observed that data follows both the isotherms and also follows second order kinetics.     

URG-9000型离子色谱仪常见问题及解决办法

介绍了URG-9000型离子色谱仪在运行中常见的问题,URG监测的离子数据部分或全部缺失、数据异常、偏低等情况。并对这些常见问题的出现原因进行了分析说明,通过做校准曲线,考虑背景电导等提出了相应的解决方法。为了提高仪器的运行稳定性保证数据的可靠、准确性,提出了仪器日常维护的一些注意事项。     

原子吸收火焰法次灵敏线测定污水和电镀污泥中高含量的锌

对采用原子吸收火焰法次灵敏线测定污水和电镀污泥中高含量的锌进行了研究。试验结果表明：在锌浓度50．0～600．0mg/L之间,溶液锌含量与吸光度呈线性关系。线性回归方程为y＝0．000661x-0．0007,相关系数γ＝0．9998。方法检出限为25．0mg/L,相对标准误差（RSD）＜2．96％,加标回收率为92．5％～105％,与标准法的相对误差＜2．76％。     

琉基纤维素对水中Cr(VI)离子的吸附研究

制备了巯基纤维素并用其对含Cr(VI)离子的溶液进行了静态吸附实验.研究了pH值、吸附时间、反应温度、吸附剂用量等因素对吸附性能的影响.结果表明:在pH值为2、Cr(VI)浓度为50 mg/L和吸附剂为0.5 g时,常温条件下吸附6h后,Cr(VI)去除率达到99.2%,吸附反应符合Langmuir和Freundlic...     

Lindet ypeF(K)沸石对Zn~(2+)的吸附研究

利用粉煤灰合成Linde type F(K)沸石吸附重金属Zn2+,考察吸附剂量、pH值、反应温度对Zn 2+吸附效果影响,研究沸石吸附Zn2+的等温线与动力学,得到了相应的模型。结果表明:吸附剂量、pH值、反应温度均对Zn2+去除效果影响显著。随着吸附剂量增大,Zn 2+去除效果不断提高,饱和吸附量逐渐减小。初始pH值为3~7时,沸石对Zn2+去除率随pH值升高迅速提高。反应温度越高,沸石吸附Zn2+到达平衡时间越短。沸石对Zn2+吸附过程符合Langmuir吸附等温式,其吸附为单分子层吸附;准二级反应动力学方程能很好描述沸石对Zn2+的吸附行为。