非金属矿物在废水处理中的应用研究

用矿物作为污水处理材料,具有储量丰富,方法简单,可去除水中无机和有机污染物,化学和生物性能稳定,容易再生等优点。非金属矿物具有良好的吸附和离子交换性能,在水处理方面有广阔的应用前景。本文介绍了海泡石、镁砂、沸石、膨润土等几种常见的矿物材料在有机废水、重金属废水及含油废水中的研究现状。     

Fruit Stones from Industrial Waste for the Removal of Lead Ions from Polluted Water

Lead, one of the earliest metals recognized and used by humans, has a long history of beneficial use. However, it is now recognized as toxic and as posing a widespread threat to humans and wildlife. Treatment of lead from polluted water and wastewater has received a great deal of attention. Adsorption is one of the most common technologies for the treatment of lead-polluted water. This technique was evaluated here, with the goal of identifying innovative, low-cost adsorbent. This study presents experiments undertaken to determine the suitable conditions for the use of peach and apricot stones, produced from food industries as solid waste, as adsorbents for the removal of lead from aqueous solution. Chemical stability of adsorbents, effect of pH, adsorbents dose, adsorption time and equilibrium concentration were studied. The results reveal that adsorption of lead ions onto peach stone was stronger than onto apricot stone up to 3.36% at 3 h adsorption time. Suitable equilibrium time for the adsorption was 3–5 h (% Pb adsorption 93% for apricot and 97.64% for peach). The effective adsorption range for pH in the range was 7–8. Application of Langmuir and Freundlich isotherm models show high adsorption maximum and binding energies for using these adsorbents for the removal of lead ions from contaminated water and wastewater.     

Adsorption thermodynamics and kinetic investigation of aromatic amphoteric compounds onto different polymeric adsorbents

The adsorption behavior of p-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature.Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm.The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest,which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid.The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid.Thermodynamic studies suggested the exothermic,spontaneous physical adsorption process.Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.     

Adsorption of phenol and its derivatives from water using synthetic resins and low-cost natural adsorbents: a review

In this article, the technical feasibility of the use of activated carbon, synthetic resins, and various low-cost natural adsorbents for the removal of phenol and its derivatives from contaminated water has been reviewed. Instead of using commercial activated carbon and synthetic resins, researchers have worked on inexpensive materials such as coal fly ash, sludge, biomass, zeolites, and other adsorbents, which have high adsorption capacity and are locally available. The comparison of their removal performance with that of activated carbon and synthetic resins is presented in this study. From our survey of about 100 papers, low-cost adsorbents have demonstrated outstanding removal capabilities for phenol and its derivatives compared to activated carbons. Adsorbents that stand out for high adsorption capacities are coal-reject, residual coal treated with H3PO4, dried activated sludge, red mud, and cetyltrimethylammonium bromide-modified montmorillonite. Of these synthetic resins, HiSiv 1000 and IRA-420 display high adsorption capacity of phenol and XAD-4 has good adsorption capability for 2-nitrophenol. These polymeric adsorbents are suitable for industrial effluents containing phenol and its derivatives as mentioned previously. It should be noted that the adsorption capacities of the adsorbents presented here vary significantly depending on the characteristics of the individual adsorbent, the extent of chemical modifications, and the concentrations of solutes.     

Platinum (IV) recovery from chloride solution by functionalized acrylic copolymers

Two acrylic adsorbents with different morphological structures and bearing amidoethylenamine and thiol groups were obtained and used for platinum sorption from chloride solution by the batch method. Physico-chemical parameters that influence adsorption such as initial Pt(IV) concentration, stirring time, pH, and adsorbent amount were investigated. The thermodynamic parameters of Pt(IV) sorption on the synthesized adsorbent were also evaluated based on Langmuir and Freundlich isotherms. Thermodynamic parameters estimated from Langmuir constants indicated that the adsorption is spontaneous, exothermic and there is a disordered state at the molecular level. The models used to analyze the sorption rate led to the conclusion that the most important step in the sorption of Pt(IV) could be both particle diffusion and chemical reaction of [PtCl₆]⁻ with amine functional groups. Thus, both the ion exchange and complex formation mechanisms can occur via nitrogen atoms in the recovery of Pt(IV) on the studied adsorbent.     

农林废弃物在去除废水重金属中的环境友好利用

评述了近年来国内外利用廉价农林废弃物去除废水重金属的研究进展.重点论述了化学改性处理的农林废弃物对重金属离子的吸附性能,并详细比较了改性前后及各种改性方法的吸附效率.改性处理明显提高了农林废弃物的吸附性能,一些改性的农林废弃物吸附剂对某些重金属离子具有良好的吸附性能,显示出广阔的应用前景.但在今后的研究中还应强化改性农林废弃物吸附剂表面结构表征、吸附作用机理和动力学的研究,开发新型高效的改性再生方法,并对废水处理成本进行详细评估.     

改性矿物吸附剂抗菌作用

通过对蒙脱石、沸石和蛭石进行改性处理,研究了三者对大肠杆菌（E．coB）和猪链球菌（S．suis）的抗菌作用。结果发现,经过改性处理后三者对细菌的抗菌能力上升,其中以双十八烷基二甲基溴化铵改性蒙脱石（DODMAB．MMT）的抗菌效果最好,对E．coli和S．suis的抗菌率达到95％以上。研究了DODMAB—MMT在体外对E．coli和S．suis的抗菌规律,以及对土壤中微生物的影响。结果表明,同等菌液浓度条件下,DODMAB—MMT对S．suis的抗菌效果好于E．coli。介质温度、pH值和有机物浓度都会对DODMAB—MMT的抗菌效果产生影响,在一定范围内,介质温度越高、pH值偏离中性、有机物含量越低时,抗菌效果越好。低浓度DODMAB—MMT（〈25rtlg／g土壤）对土壤中E．coli和S．suis基本无抗菌作用,高浓度DODMAB—MMT对土壤中的E．coli和S．suis具有抗菌作用。     

树脂吸附法处理对硝基苯乙酮生产废水

采用AM-1吸附树脂和ND-900络合树脂对硝基苯乙酮生产废水进行吸附处理，试验结果表明，使用2种树脂串联的处理效果优于单独使用某一种树脂，而且ND-900络合树脂在前，AM-1吸附树脂在后串联处理的效果最好，废水体积为30BV时，COD去除率为92.8%；脱色率为100%，出水由原废水的橙红色变为无色，采用质量分数为8%的NaOH溶液作为脱附剂，脱附效果良好。     

凹凸棒石/γ-Fe_2O_3/碳纳米复合材料的制备及其对苯酚的吸附作用

为获得同时具有有机亲和性和磁分离特性的吸附材料,以凹凸棒石黏土和废活性白土为原材料,通过铁盐水解共沉淀和在氢气气氛下程序升温煅烧的方法,制备廉价的凹凸棒石γ-Fe2O3/碳纳米复合材料.运用磁化率分析,红外吸收光谱,透射电镜,X射线衍射分析和碳含量分析对其进行了表征,并研究了复合材料吸附去除水中苯酚的动力学、吸附试验中pH的影响及同等条件下与其他吸附材料吸附性能的对比.结果表明,复合材料的磁化率值为2 769×10-8m3/kg,用磁分离工序即可把该吸附材料从溶液中快速分离出来;铁的磁性氧化物以γ-Fe2O3的形态负载到凹凸棒石表面,颗粒直径为10～60nm;碳以无定形的形态负载在凹凸棒石晶体表面;复合材料中的ω(碳)为7.4%,材料中出现了有机官能团-CH3和-CH2-.对苯酚的吸附试验表明,复合材料对苯酚的去除率是凹凸棒石原矿的3倍.     

Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents

Perfluorooctane sulfonate (PFOS), as a potential persistent organic pollutant, has been widely detected in water environments, and has become a great concern in recent years. PFOS is very stable and difficult to decompose using conventional techniques. Sorption may be an attractive method to remove it from water. In this study, the molecularly imprinted polymer (MIP) adsorbents were prepared through the polymerization of 4-vinylpyridine under different preparation conditions in order to remove perfluorooctane sulfonate (PFOS) from water. The MIP adsorbents using perfluorooctanoic acid (PFOA) as the template had good imprinting effects and could selectively remove PFOS from aqueous solution. The sorption behaviors including sorption kinetics, isotherms, and effect of pH, salt, and competitive anions were investigated. Experimental results showed that the sorption of PFOS on the MIP adsorbents was very fast, pH-dependent, and highly selective. The achieved fast sorption equilibrium within 1 h was attributed to the surface sorption on the fine adsorbents. The sorption isotherms showed that the sorption selectivity of PFOS on the MIP adsorbents decreased at high PFOS concentrations, which may be due to the double-layer sorption and the formation of PFOS micelles on the sorbent surface. The sorption of PFOS on the MIP adsorbents was mainly dominated by the electrostatic interaction between the protonated vinylpyridine on the adsorbent surface and the anionic PFOS. The prepared MIP adsorbents can potentially be applied in water and wastewater treatment for selective removal of PFOS.