甘蔗糖蜜酒精废液培养食用菌丝的研究

以甘蔗糖蜜酒废液作为唯一原料对多种食用菌丝进行培养比较，筛选出最适于废液生长的菌种--灵芝菌，并研究了种龄、温度、pH值等对菌丝生长的影响。在不需添加其它营养物质的情况下，培养周期力为4d，菌丝得率达1.1g/100ml。废液的糖浓度从2.1g/100ml降到0.5g/100ml，COD除去率为39％左右。     

水热法制备BiVO4及其可见光催化降解糖蜜酒精废水

以Bi(NO3)3•5H2O为铋源,NH4VO3为钒源,采用简单的水热法制备了BiVO4 光催化剂,并用X-射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)和紫外-可见光漫反射光谱(UV-vis)对产品进行了结构表征。同时,在BiVO4光催化降解糖蜜酒精废水反应中考察了催化剂用量、通氧量、溶液pH值、双氧水用量及光照强度对糖蜜酒精废水脱色率的影响。实验结果表明,水热产品属于单斜晶系BiVO4,其带隙能为2.398 eV,并具有良好的可见光催化活性。当降解经30倍稀释的糖蜜酒精废水,BiVO4添加量为3.0 g•L−1 ,通氧量为120 L•h-1,助氧化剂H2O2添加量为9 %,不改变废水pH值,在400W镝灯离液面11cm照射反应180 min的条件下,糖蜜酒精废水的脱色率为88.60 %,COD去除率为25.84%,而添加5g•L−1的FeSO4•7H2O后其脱色率和COD去除率分别提高到90.90 %和91.26%。单斜晶型BiVO4晶体的可见光催化糖蜜酒精废水过程符合一级动力学反应。     

糖蜜酒精厂环境保护验收清洁生产评价研究

糖蜜是糖厂榨糖后的副产品,含有可发酵性的糖45％∽52％,是直接用于发酵生产酒精的较好的原料.文章以广西某糖蜜酒精厂为例,在调查了解酒精厂生产工艺与装备、资源能源利用指标、污染物产生指标、废物回收利用率和环境管理要求等五个方面的基础上,认真细致分析环境保护竣工验收监测数据及生产报表数据,按照（HJ 581-2010）《清洁生产标准酒精制造业》（国家环境保护部）的要求对酒精厂清洁生产水平进行评价,并根据评价结果提出进一步提高清洁生产水平的建议和要求.     

Molasses-based growth and lipid production by Chlorella pyrenoidosa: A potential feedstock for biodiesel

Biodiesel provides a feasible solution to the twin crisis of energy security and environmental concerns prevalent today, and it can be extracted from conventional oil crops as well as microalgae. However, lipid productivity in case of microalgae is much higher and has several advantages as compared with crop plants, so it is a better feedstock for biodiesel. In case of Chlorella pyrenoidosa, the heterotrophic cultured cells were found to be better in terms of lipid production, and ultimately biodiesel production, but the bottleneck is that in this mode glucose is used to feed the cells, which amounts to almost 80% of the total cost of biodiesel production. The purpose of this study is to evaluate and highlight the feasibility of using the industrially cheap cane molasses as a carbon source in place of glucose for a large-scale, low-cost lipid production of Chlorella pyrenoidosa. When treated molasses was used as a carbon source instead of glucose, the biomass sharply increases from 0.89 to 1.22 g L^–1. On the other hand, the total lipid content increases from 0.27 to 0.66 g g^–1. The specific growth rate and yield was higher in treated molasses as compared with that in glucose-supplemented. A mathematical model was also developed based on logistic, Luedeking–Piret, and Luedeking-Piret-like equations. Model predictions were in satisfactory agreement with the measured data, and the mode of lipid production was growth-associated.     

改性粉煤灰对糖蜜废水的吸附效果及机理

采用改性粉煤灰(MCFA)吸附糖蜜废水中的有机污染物,对吸附行为和机理进行了考察和分析。结果表明,MCFA投加量为30 g/L及pH为5.0的优化条件下,COD去除率为88.6%,饱和吸附量为89.7 mg COD/g MCFA。准二级方程能更好地描述糖蜜废水在MCFA上的吸附动力学。颗粒内扩散方程结果表明孔扩散并非唯一的速度控制步骤。吸附平衡表明,Freundlich等温线最符合吸附模式,为优惠吸附。D-R模式中的吸附自由能Ea值推断更可能是物理吸附而不是化学吸附。吸附热力学参数ΔG0(<0)、ΔH0(5.130 kJ/mol)和ΔS0(19.936 J/(mol.K))表明MCFA对糖蜜废水的吸附过程为可行的,自发性的吸热反应。     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

不同有机废水厌氧产酸过程的研究

主要研究了不同类废弃有机物厌氧产酸过程中产生的挥发性脂肪酸的产量和组成比例。研究发现,废糖蜜溶液、蛋白废液和淀粉废液在达到最高产酸量时,超过50%的VFAs是乙酸,其次是丙酸,还含有少量的丁酸和戊酸。废甘油溶液在达到最高产酸量时,产生的VFAs的主要成分是丙酸。4种有机废液中,相同初始COD浓度条件下,淀粉废液产生的VFAs产量最多,初始COD为5000mg/L时最高产量为2.321g/L,其次是废甘油溶液,最高产量是2.244g/L。     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics—Part IV: Polysaccharide Containing Natural Materials

Corn distillers’ dry grain, corncob powder, hardwood powder, and sugar beet pulp were separately anionized by oxidation with sodium hypochlorite in aqueous solution. Solid reaction products instantly precipitated upon admixing each of the above-oxidized materials with soy protein isolate. Infrared spectra and differential scanning calorimetry supported the hypothesis that soy protein isolate complexed with all of the above-oxidized polysaccharides. Reaction products with either oxidized corn distillers’ dry grain or oxidized sugar beet pulp provided hard, brittle pellets with tensile strengths as high as 9.5 MPa, suggesting that these materials could be viable as biodegradable plastics.     

高效复合菌在木薯酒精废液处理中的应用研究

对酒精废液生物处理反应器内颗粒污泥中的微生物进行分离纯化.分离出的8株高效优势菌,初步鉴定结果:1号为皮杆菌属;2号为棒杆菌属;3号、4号为微小杆菌属;5号为乳杆菌属;6号为纤维单胞菌属;7号为丙酸杆菌属;8号为红长命菌属.对8种纯化后的菌株进行混合培养,确定了复合菌群生长最佳培养温度为37℃,最适pH值为6.8.在处理过程中投加适量葡萄糖、硝酸铵和微量元素能够提高复合菌群的处理效果.最佳添加量为:葡萄糖0.5g/L,硝酸铵1g/L,Fe2 5mg/L和Ca2 25mg/L.在日处理量100 m3的UASB生物反应器中投加该复合菌群后,木薯酒精废液的COD去除率明显提高,达到90%以上.处理系统运行稳定.