Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.     

不同空间划分方式下袁河流域景观结构对水质的影响

近年来景观结构的水文效应受到关注,研究不同空间划分方式下景观结构对河流营养盐、重金属变化的影响机制对于流域生态保护具有重要意义.本文于2018年7月和2019年1月在袁河干流及支流38个采样点采集水样,测定水体营养盐类污染指标（DO、NO₃^--N、NH₄⁺-N、TP和DOC浓度）和重金属类污染指标（Cr、Mn、Fe、Cu、Zn、As、Cd和Pb浓度）.基于前向变量选择、冗余分析等方法,筛选景观结构指标,量化其在不同尺度下对水体营养盐、重金属变化的影响.结果表明：①农田、斑块密度（PD）、斑块聚集指数（COHESION）及散布与并列指数（IJI）是影响水体营养盐变化的主要指标.林地、建设用地（Res）、平均最近邻体距离（ENN_MN）和最大斑块指数（LPI）的组合是影响重金属变化的主要指标.②在河岸缓冲带与圆形缓冲区划分方式下,景观结构均在100 m尺度对营养盐变化解释能力最强,平均解释率分别为31.5%、24.3%,均在1000 m尺度对重金属变化解释能力最强,平均解释率分别为32.0%、42.6%.③100 m河岸缓冲带和子流域尺度分别是景观结构影响水体营养盐、重金属变化的最佳空间尺度,平均解释率分别为31.5%、42.8%.以上结果表明,针对水体不同的污染类型,采用对应的划分方式及缓冲尺度有助于提高定量分析精度,为流域水环境保护、景观优化与管理提供科学依据.     

关于在长江经济带布局以水质改善为目标的流域生态缓冲体系的思考

生态缓冲带能够有效减缓流域内的人类活动或自然过程对水环境和水生态系统的影响.在长江经济带构建流域生态缓冲体系,对长江生态保护修复具有十分重要的意义.讨论了构建流域生态缓冲体系涉及的生态缓冲带位置选择、缓冲体系所占最低面积比率、宽度划定等一些基本的原则要求;利用卫星遥感影像数据,提取各汇水单元的地形特征、土地利用类型特征、土壤类型、土壤侵蚀强度、水文水系等数据,对长江经济带流域生态缓冲体系进行布局.结果表明:①长江经济带内林草地是主要土地利用类型,占区域总面积的62.46%,但是分布很不均匀,主要集中在西部高地和中下游的丘陵地带,在人口密集、农田密集的区域分布偏少;城镇用地主要集中在长江中下游地区.②土壤类型空间差异显著,浙江省、江苏省、湖南省、江西省及安徽省大部分区域的土壤多是黏性比较大,污染物迁移能力较低;而污染物迁移能力较强的砂质土或者土层较薄的山地草甸土主要分布在四川省北部、西北部.水力侵蚀、风力侵蚀和冻融侵蚀均有分布,且以水力侵蚀为主,建议在中度及以上侵蚀强度区域尽量减少污染源,重点布置缓冲带,增加该区域的缓冲力度.③长江经济带范围内可以利用的中小型湿地、小型河流支浜的面积至少有1.4×104 km2,再结合林草缓冲带,就可以形成一个生态缓冲体系.④在土地利用类型分布结果基础上,叠加土壤侵蚀强度和水系分布,将污染源区、中度及以上侵蚀强度区、水体区作为缓冲对象,建立缓冲体系的重点区域,总面积约14.26×104 km2,占长江经济带总面积的6.95%.对照欧美地区的研究,6.95%的缓冲体系面积占比是偏低的,需要在长江经济带开展深入研究来确定适宜的缓冲体系面积比,推进长江经济带流域生态缓冲体系的构建.      

矿物材料吸附去除污水中磷的试验研究

采用粉煤灰、高岭土、泥渣(取电厂澄清池排泥作脱水干燥处理)作为吸附剂深度处理污水中的磷,对比分析了3种吸附剂的吸附速度、吸附性能及除磷效果。结果表明:粉煤灰和高岭土用时20 min完成对磷的有效吸附,沉降泥渣用时5 min即可实现同等吸附效果;沉降泥渣对污水中磷的吸附能力较好,投加量为0.2 g/L的泥渣对磷的去除率可达98.1%,而投加量为0.2 g/L粉煤灰或高岭土对磷的去除率仅达到77.2%。     

提升汇流环湿热环境适应性方法研究

目的提高汇流环在湿热环境下的适应能力。方法实物解剖,观察汇流环绝缘材料损坏情况、碳粉堆积情况,在不同温度、湿度下测试绝缘材料绝缘度、抗电强度,碳粉堆积和导电情况,比对不同绝缘材料性能,并找出最适合的绝缘材料,比对滚动汇流环、碳刷组件、刷丝组件,找到解决碳粉堆积的方法。结果汇流环受湿热影响会从接缝处和电缆连接处进入湿气,温度、湿度的上升会使得原绝缘材料性能下降,长时间使用汇流环,碳粉会在汇流环内堆积并受到湿热的影响而导电,局部密封汇流环可以减少湿气进入。PPO材料性能优异,可以替换原绝缘材料从而减少湿热的影响,使用刷丝组件替代碳刷可以避免碳粉的产生。结论综合运用局部密封、绝缘材料改进、碳刷组件改进三种措施,可以有效提高汇流环在湿热环境下的适应能力。     

Assessing protected area effectiveness using surrounding (buffer) areas environmentally similar to the target area

Many studies are based on the assumption that an area and its surrounding (buffer) area present similar environmental conditions and can be compared. For example, in order to assess the effectiveness of a protected area, the land use/cover changes are compared inside the park with its surroundings. However, the heterogeneity in spatial variables can bias this assessment: we have shown that most of the protected areas in Mexico present significant environmental differences between their interior and their surroundings. Therefore, a comparison that aims at assessing the effectiveness of conservation strategies, must be cautioned. In this paper, a simple method which allows the generation of a buffer area that presents similar conditions with respect to a set of environmental variables is presented. The method was used in order to assess the effectiveness of the Calakmul Biosphere Reserve, a protected area located in the south-eastern part of Mexico. The annual rate of deforestation inside the protected area, the standard buffer area (based upon distance from the protected area only) and the similar buffer area (taking into account distance along with some environmental variables) were 0.3, 1.3 and 0.6%, respectively. These results showed that the protected area was effective in preventing land clearing, but that the comparison with the standard buffer area gave an over-optimistic vision of its effectiveness.     

处理废弃轮胎的一种有效方法——轮胎加筋土结构

废胎占用大量空间 ,且会产生诸多环境问题 ,利用轮胎加筋建筑挡土墙或陡坡 (堤 )是解决该问题的一种有效方法。本文提供了一种加筋堤的设计方法 ,比较了不同加筋模式 ,并对该堤进行了环境及其它指标的评价 ,证明了其可行性。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

国内外军工材料环境试验现状及发展趋势

介绍军工材料环境试验对提高装备环境适应性的重要作用。从不同的技术方面,分析了国内外军工材料环境试验的现状、发展趋势以及主要差距。从规划的制定、新技术新方法的研发以及信息共享方面,提出设想。提出了目前需要研发新的环境试验、评价、管理方法和需要突破的关键技术。     

基于行业全产业链评估一份外卖订单的环境影响

构建"生产-运输-使用-废弃处置"的外卖全产业链，通过大样本企业调研与外卖平台大数据分析，计算8个样本城市不同材质与规格的外卖餐盒、餐具、包装袋的市场使用比例，挖掘骑手配送的海量数据，收集城市垃圾处理处置情况，系统评估外卖全过程的环境影响.结果表明，外卖包装物全产业链中生产环节（45%）与废弃处置环节（50%）为环境影响的主要来源，严重程度依次为固废排放、水污染、资源能源消耗和大气污染.所在城市及选用包装物材质的不同，外卖行业造成的环境影响会有显著区别，全产业链上的各环节需相互配合，多主体共同承担环境责任，采取差别化的减缓应对措施.