Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

Feasibility of honeycomb monolith supported sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD)

Carbon coated monolith was prepared by sucrose solution 65 wt.% via dip-coating method. Sulfonation of incomplete carbonized carbon coated monolith was carried out in order to synthesize solid acid catalyst. The textural structure characteristics of the solid acid catalyst demonstrated a low surface area and pore volume. Palm fatty acid distillate (PFAD), a by-product of palm oil refineries, was utilized as oil source in biodiesel production. The esterification reaction subjected to different reaction conditions was performed by using the sulfonated carbon coated monolith as heterogeneous catalyst. The sulfonation process had been performed by using vapour of concentrated H₂SO₄ that was much easier and efficient than liquid phase sulfonation. Total acidity value of carbon coated monolith was measured for unsulfonated sample (0.5 mmol/g) and sulfonated sample (4.2 mmol/g). The effect of methanol/oil ratio, catalyst amount and reaction time were examined. The maximum methyl ester content was 89% at the optimum condition, i.e. methanol/oil molar ratio (15:1), catalyst amount (2.5 wt.% with respect to PFAD), reaction time (240 min) and temperature 80 °C. The sugar catalyst supported on the honeycomb monolith showed comparable reactivity compared with the sugar catalyst powder. However, the catalyst reusability studies showed decrease in FFA% conversion from 95.3% to 68.8% after four cycles as well as the total acidity of catalyst dropped from the value 4.2 to 3.1 mmol/g during these cycles. This might be likely due to the leaching out of SO₃H group from the sulfonated carbon coated monolith surface. The leaching of active species reached a plateau state after fourth cycle.     

Dynamics of growth and seed production in the Siberian stone pine: The level and pattern of variation in characters

A statistical analysis of interannual variation in a set of vegetative and generative characters over 13 years has been performed to characterize the growth and seed production dynamics of the Siberian stone pine (Pinus sibirica Du Tour) in the southeast of the forest zone in western Siberia. The results have shown that the range of fluctuations in most of vegetative characters is ordinary and their distribution is close to normal. The range of fluctuations in many generative characters is enormous (from 0 to +∞), and the distribution of their values is usually skewed, with low values being recorded several times more frequently than high values. Most variable are the proportion of abortive cones and other characters that are determined mainly in the spring of the pollination year. These characters account for a very high level of variation in the total seed production.     

江汉平原粮食开发必须走优质高产高效的道路

分析江汉平原粮食生产的优势与问题,运用商品经济的观念,提出改革开放新形势下加快江汉平原粮食开发的设想,即依托市场,按照价值规律,科学地调整种植业比例和粮食种类结构,发展优质品种,扩大优化模式及采用高新技术等,通过优质、高产、高效,促进江汉平原粮食生产的发展。     

项目决策阶段清洁生产分析方法的研究

企业在建设项目决策时就应该按照清洁生产的原则，从源头控制污染。提出了在项目决策中，应从产品选择、工艺路线选择、主要设备选型和节能降耗4个方面进行清洁生产的分析方法，通过此分析方法的应用，可以避免项目决策中的环境失误和降低企业的环境风险。     

Geochemical characteristics of surficial sediments in a tropical estuary, south-west India

Geochemical characteristics of surficial sediments in the Panangad region of Cochin estuary, the largest brackish-water humid ecosystem in the south-west coast of India, were analysed. Temporal variations in nutrient stoichiometry, seasonal characteristics of redox elements Fe and S, and the phosphorus geochemistry were employed for the purpose. The stoichiometric analysis pointed towards autochthonous origin of organic matter, possibility of nitrogen limitation, and allochthonous modification of redox conditions. Seasonal variations were not statistically significant for all the geochemical parameters, whereas significant spatial variations were observed with lower values at sandy stations, suggesting that the texture of the sediments is the main factor influencing the sediment geochemistry. Significant inter-relations between the geochemical parameters also suggest a common control mechanism. Based on these geochemical characteristics, the study region can be effectively categorized into two distinct zones, viz. (1) erosion and transportation and (2) deposition zones.     

Deep chlorophyll maximum distribution in the central Tyrrhenian Sea described by a towed undulating vehicle

The towed undulating vehicle (TUV), named SARAGO, was used for two fine-scale surveys between the Italian and the Sardinian coasts during the Astraea 2 cruise (6-7 and 26-27 September 1995), studying the deep chlorophyll maximum distribution. SARAGO sections identify a sub-surface doming with higher chlorophyll a and primary production concentrations in the upwelling area of a cyclonic gyre region, detected by sea-surface temperature images. In the first section, the cyclone presents a double doming, in density and salinity, with shallower and concentrated patches of chlorophyll a for about 2 miles. Twenty days later, the second section shows that the gyre changes shape and extension, showing a single doming with higher primary production and chlorophyll a concentrations, distributed over a large area of about 40 nautical miles. SARAGO allows analysis of this high-variability phenomenon (cyclonic gyre) and allows concentrated patches (2 nm) to be identified, thus proving the importance of TUVs in the study of mesoscale processes.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Effects of calcination temperature on physicochemical property and activity of CuSO4/TiO2 ammonia-selective catalytic reduction catalysts

CuSO_4/TiO_2 catalysts with high catalytic activity and excellent resistant to SO_2 and H_2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH_3.The performance of catalysts is largely affected by calcination temperature.Here,effects of calcination temperature on physicochemical property and catalytic activity of CuSO_4/TiO_2 catalysts were investigated in depth.Catalyst samples calcined at different temperatures were prepared first and then physicochemical properties of the catalyst were characterized by N2 adsorption-desorption,X-ray diffraction,thermogravimetric analysis,Raman spectra,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,temperature-pro grammed desorption of NH_3,temperature-programmed reduction of H_2 and in situ diffuse reflectance infrared Fourier transform spectroscopy.Results revealed that high calcination temperature had three main effects on the catalyst.First,sintering and anatase transform into rutile with increase of calcination temperature,causing a decrement of specific surface area.Second,decomposition of CuSO_4 under higher calcination temperature,resulting in disappears of Br(?)nsted acid sites(S-OH),which had an adverse effect on surface acidity.Third,CuO from the decomposition of CuSO_4 changed surface reducibility of the catalyst and favored the process of NH_3 oxidation to nitrogen oxides(NO_x).Thus,catalytic activity of the catalyst calcined under high temperatures(≥600℃) decreased largely.     

废塑料再生过程废水中微塑料去除模拟试验

微塑料是一种存在于不同环境介质中的新兴污染物,主要来源于废弃塑料制品,其存在污染范围广、潜在环境污染大的问题.废塑料再生企业生产废水中微塑料浓度远高于其他类型废水,对其生产废水中的微塑料进行处理具有重要的环境意义.模拟废塑料再生过程的生产废水并进行微塑料去除的絮凝沉淀试验,研究絮凝剂投加量、pH、水力快速搅拌条件的单因素和正交试验对废水中微塑料去除率及其各因素作用的影响.结果表明:①当PAC (聚合氯化铝)投加量为10 mL,PAM (聚丙烯酰胺)投加量为7 mL,pH为9,水力快速搅拌条件为100 r/min下维持40 s再200 r/min下维持40 s时,微塑料的总去除率最高,达91%.②PAC投加量是影响微塑料去除效果的主要因素,其次是pH.③微塑料的去除率与其本身的密度有关,密度大的ABS (acrylonitrile butadiene styrene,丙烯腈-丁二烯-苯乙烯)去除率最高,密度小的PE (polyethylene,聚乙烯)去除率最低.④不同粒径区间的微塑料去除率区别较大,粒径小(0.1~0.25 mm)的微塑料去除效果最好.研究显示,通过控制PAC和PAM的投加量、pH和水力搅拌速率等条件,能够有效将废水中的微塑料通过絮凝沉淀的方法去除,从而达到净化含微塑料生产废水的目的.