Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

Preimplantation genetic diagnosis of the fragile X syndrome by use of linked polymorphic markers

Fragile X syndrome is the most common cause of familial mental retardation. The most common mutation is expansion of a triplet (CGG)_n repeat in the 5′ untranslated region of the FMR1 gene on Xq27.3. The expansion is refractory to PCR due to preferential amplification of the smaller allele in heterozygous cells and the high GC content of the repeat and surrounding sequences. Direct detection of the normal parental alleles in preimplantation embryos has been used for preimplantation genetic diagnosis (PGD) of this disorder. However, this approach is only suitable for approximately 63% of couples due to the heterozygosity of the repeat in the normal population. As an alternative we investigated the use of polymorphic markers flanking the mutation to track the normal and premutation carrying maternal chromosomes in preimplantation embryos. Using a panel of 11 polymorphisms, six (CA)_n repeats and five single nucleotide polymorphisms, diagnosis was developed for 90% of referred couples. Multiplex amplification of informative markers was tested in 300 single buccal cells from interested couples with efficiency and allele drop out (ADO) rates ranging from 69% to 96% and 6% to 18%, respectively. Use of this approach is accurate and applicable to a larger number of patients at risk of transmitting fragile X to their offspring. Copyright © 2001 John Wiley & Sons, Ltd.     

A comparison of different lysis buffers to assess allele dropout from single cells for preimplantation genetic diagnosis

Single cell polymerase chain reaction (PCR) for preimplantation genetic diagnosis (PGD) requires high efficiency and accuracy. Allele dropout (ADO), the random amplification failure of one of the two parental alleles, remains the most significant problem in PCR-based PGD testing since it can result in serious misdiagnosis for compound heterozygous or autosomal dominant conditions. A number of different strategies (including the use of lysis buffers to break down the cell and make the DNA accessible) have been employed to combat ADO with varying degrees of success, yet there is still no consensus among PGD centres over which lysis buffer should be used (ESHRE PGD Consortium, 1999 ). To address this issue, PCR amplification of three genes (CFTR, LAMA3 and PKP1) at different chromosomal loci was investigated. Single lymphocytes from individuals heterozygous for mutations within each of the three genes were collected and lysed in either alkaline lysis buffer (ALB) or proteinase K/SDS lysis buffer (PK). PCR amplification efficiencies were comparable between alkaline lysis and proteinase K lysis for PCR products spanning each of the three mutated loci (ΔF508 in CFTR 90% vs 88%; R650X in LAMA3 82% vs 78%; and Y71X in PKP1 91% vs 87%). While there was no appreciable difference between ADO rates between the two lysis buffers for the LAMA3 PCR product (25% vs 26%), there were significant differences in ADO rates between ALB and PK for the CFTR PCR product (0% vs 23%) and the PKP1 PCR product (8% vs 56%). Based on these results, we are currently using ALB in preference to PK/SDS buffer for the lysis of cells in clinical PGD. Copyright © 2001 John Wiley & Sons, Ltd.     

Toxicological Assessment of Wastewater and Runoff from the Baikal Pulp and Paper Mill

Russian Journal of Ecology -     

Comparative Analysis of Ecophysiological Characteristics of Stephanodiscus hantzschii Grun. in the Periods of Its Bloom in Recreational Water Bodies

In the periods of summer and autumn bloom of the Stephanodiscus hantzschii Crun. in recreational water bodies, studies on the vertical distribution of chlorophyll a, its contents per unit biomass, efficiency in using photosynthetically active radiation (E_PhAR), and assimilative activity of microalgae were performed. The results confirmed the existence of two ecophysiological forms of St. hantzschii and provided evidence that both forms are typically autotrophic and can efficiently use low-intensity PhAR for photosynthesis.     

硫化亚铁处理含砷废水中砷的形态变化

本文对用硫化亚铁处理含砷废水时，在气相、液相和固相中砷的形态进行了研究结果表明，在气相中无ＡａＨ３，但在Ａｓ（Ｖ）废水的液相中有Ａｓ（Ｖ）和Ａｓ（Ⅲ）共同存在，在固相中有Ａｓ（０），ＦｅＡｓＯ４（ＦｅＡｓＯ３），Ａｓ２Ｓ３（Ａｓ２Ｓ５）和吸附砷，砷的形态变化表明，硫化亚铁处理含砷废水能取得良好的效果，是沉淀、沉淀转化、氧化还原、吸附共沉淀和中和五种反应共同作用的结果。     

蚯蚓对城镇污泥堆肥过程中微型动物群落演替的影响

采用实验对比和除趋势对应分析（DCA）等方法,以城镇污泥中的微型动物为对象,研究蚯蚓对堆肥过程微型动物群落演替的影响.结果表明,蚯蚓仅影响微型动物群落数量,对演替进程无明显影响.堆肥过程微型动物群落演替可分为3个阶段：第1阶段（0~10 d）,固着类纤毛虫为优势类群阶段,该阶段微型动物变化多受限于环境的改变,蚯蚓影响较小;第2阶段（10~30 d）,固着类纤毛虫和轮虫向肉足虫和线虫为优势类群的过渡阶段,该阶段蚯蚓对线虫数量有一定的限制;第3阶段（30 d后）,肉足虫和线虫为优势类群阶段,该阶段蚯蚓对有壳肉足虫的增长产生了明显的抑制作用.群落多样性指数结果显示,蚯蚓在第1和第2阶段作用不明显,在第3阶段增加了微型动物的多样性和均匀度,减小了优势物种的优势程度.对固着类纤毛虫的同化作用是蚯蚓稳定堆肥环境、促进有机质降解的重要因素.     

铁铜双金属有机骨架MIL-101(Fe,Cu)活化双氧水降解染料性能

针对非均相芬顿传质效率低和Fe（Ⅲ）Fe（Ⅱ）转化慢导致活性低等问题,采用溶剂热法制备铁铜双金属有机骨架材料[MIL-101（Fe,Cu）],并研究了材料界面性质、催化降解染料（亚甲基蓝）性能以及活化催化机制.结果表明,MIL-101（Fe,Cu）晶体结构完整且呈三维八面体形状;比表面积和平均孔径分别为667.2 m² ·g^-1和1.9 nm,可充分暴露反应活性位点.MIL-101（Fe,Cu）在广谱pH范围可活化H₂ O₂高效降解亚甲基蓝.当pH=5、反应20 min,MIL-101（Fe,Cu）/H₂ O₂对20 mg ·L^-1亚甲基蓝的去除率为100%,较MIL-101（Fe）/H₂O₂和单独H₂ O₂分别提高43.1%和88.9%.自由基猝灭实验与反应前后铁和铜价态变化结果表明,羟基自由基（·OH）是MIL-101（Fe,Cu）/H₂ O₂催化降解亚甲基蓝的主要活性物种;Cu（Ⅱ）掺杂引入新的活性位点,且Cu（Ⅱ）/Cu（Ⅰ）循环和Fe（Ⅲ）/Fe（Ⅱ）循环可协同产生·OH,进而提高催化效率.MIL-101（Fe,Cu）作为新型非均相类芬顿催化剂,无需复杂pH调节即可获得良好催化效果,在工业废水处理上具有较好地应用前景.     

不同低碳氮比废水中好氧颗粒污泥的长期运行稳定性

为了研究好氧颗粒污泥系统处理低碳氮比废水的长期运行稳定性,采用低碳氮比（C/N）条件下逐步增加碳氮负荷的进水方法,分别在反应器A和B中接种好氧颗粒污泥,考察其长期运行过程中的理化性质、处理性能及应对冲击负荷的稳定性.其中A反应器的碳氮比一直维持在2,而B则由4逐步降至2.结果表明,在4℃存储30d的好氧颗粒污泥,经过25d的培养,其活性基本恢复,A、B反应器化学需氧量（COD）和氨氮（NH₄⁺-N）的去除效率均达到90%以上.在其后的稳定阶段,B反应器COD和NH₄⁺-N去除率达到90%以上,实现了完全硝化;而A反应器COD去除率仅80%左右,虽然NH₄⁺-N去除率最终也达到90%以上,但仅实现短程硝化.在冲击负荷阶段,A和B反应器COD去除率仍维持在80%以上,但是NH₄⁺-N去除受到很大冲击.A反应器NH₄⁺-N去除效率恶化,B反应器仅实现了部分硝化.整个运行过程,好氧颗粒污泥的物理性质受到的影响不大,A和B反应器的污泥容积指数（SVI₃₀）分别维持在60 mL ·g^-1和75 mL ·g^-1左右,混合液悬浮固体（MLSS）在5g ·L^-1和3.7g ·L^-1左右.颗粒污泥微生物群落分析表明,B反应器相对于A反应器丰富度和多样性更高.同时B反应器具有更高丰度的Zoogloea属,在颗粒中能产生更多的胞外蛋白促使颗粒结构更稳定,保证系统的长期稳定运行.以上结果表明,与C/N为2的好氧颗粒污泥系统相比,C/N为4的系统脱碳硝化效果好,抗冲击负荷能力强,更有利于颗粒污泥的长期稳定运行.