制革废水治理方法的研究

对制革废水进行了实验研究，提出了制革废水的处理方法．即首先对铬鞣废水进行单独处理，回收鞣革液，再采用聚合硅酸系混凝剂和聚丙烯酰胺（ＰＡＭ）来处理混合废水的新方法．     

New findings on the generation of waste and emissions, and a modified cleaner production assessment approach-illustrated by leather production

New findings on the causes of waste and emissions, which were obtained from analysing numerous material streams in various sectors of industry, are presented in this article. It describes the implications of these findings for the vision of clean production, for formulating environmental policy concerning cleaner production targets, for the opportunities to assess to what extent the cleaner production targets have been met, and for the cleaner production assessment. A modified cleaner production assessment approach is presented, and illustrated using leather production as an example. The consequent implications for the diffusion of cleaner production are discussed.     

制革废水处理技术的研究

简要介绍了国内制革厂污水排放情况,并分别提出了一种废水分隔治理和综合利用相结合较好的处理制革废水的办法;同时还提出了适合国内大多数制革厂的废水综合治理方法.     

用差示分光光度法测定高浓度皮革废水中铬的方法探讨

介绍了应用差示分光光度法直接测定高浓度皮革废水中Cr的方法，通过与原实验方法分析结果的对比，获得了满意的结果，能基本满足环境监测的要求。     

散射光下铁(III)-丙酮酸盐配合物还原铬(VI)的研究

研究了在散射光下铁(III)-丙酮酸盐配合物对铬(V I)的光还原反应;考察了溶液pH、铁(III)、丙酮酸钠、铬(V I)浓度对反应的影响;分析了铬(V I)光还原反应的动力学。实验结果表明:铁(III)-丙酮酸盐配合物体系能在较弱的散射光下还原铬(V I)。在铬(V I)浓度为19.2μm o l/L、铁(III)浓度为10.0μm o l/L、丙酮酸钠浓度为240μm o l/L、pH为3.0、光照240m in的条件下,铬(V I)的还原率达到99.7%。从表观动力学方程的反应级数看,铁(III)的级数(0.83)最高,铁(III)浓度是影响铬(V I)光还原反应速率的主要因素,铁(II)是铬(V I)光还原的主要还原剂。     

废弃线路板热解油中酚类物质的提取与分离

将FR-4型废弃线路板热解,并对热解油中含量最多的组分-酚类物质进行分离提取.比较研究线路板热解油的分离提取方法,探索出"碱液处理-酸化-萃取-减压蒸馏"的新方法,对分离出的组分进行GCMS(气质联用)测试.结果显示运用该方法对FR-4型线路板的热解油进行提取分离,得到的总酚占热解油的62.0%,其中苯酚的最高纯度可达...     

PU合成革废水治理分析

生产聚氨酯（PU）合成革的废水中含有高浓度有机物,其中N,N-二甲基甲酰胺（DMF）毒性大,难生物降解.文章阐述了合成革的生产工艺,分析该过程中DMF废水形成阶段、处理现状及其处理方法.结合各种方法的优缺点,展望了DMF废水的处理研究方向.     

激光烧蚀皮革过程中的废气成分研究

皮革在激光烧蚀过程中会产生大量具有恶臭气味的有机废气,严重影响空气质量。为了评估该类型气体危害,分别利用紫外可见分光光度计和气相色谱-质谱联用仪,检测了天然皮革和人造革在激光烧蚀过程中的废气成分。结果显示烧蚀天然皮革所产生的废气中含有NO、NO2、SO2、二氨基丙烷和丙烯酸甲酯,烧蚀人造革所产生的废气中含有NO、NO2、甲硫醇、二硫化碳、乙二醇、二甲基二硫醚、丙二醇、乙二醇二甲醚和硫代乙酸甲酯。其中,甲硫醇、二硫化碳、二甲基二硫醚和乙二醇二甲醚都是产生恶臭的有机成分。研究为该类型废气的治理提供了基础数据和依据。     

液膜分离技术处理含Cr6+废水的研究

采用液膜分离技术处理Cr^6＋质量浓度为200—1000mg／L的废水,考察了膜溶剂、载体、内水相、外水相、pH、乳水比（乳液与废水的体积比）等因素对处理效果的影响,通过正交实验得出最佳实验条件。结果表明,在膜溶剂为煤油、载体为三辛胺、内水相为氯氧化钠、氢氧化钠质量分数为2％、pn为1、乳水比为1：4的最佳条件下,Cr^6＋的去除率可达98．4％。     

Price and volatility transmission between primary and scrap metal markets

The relationship between primary and scrap prices has been hypothesized for the most part as unidirectional, characterized by spillovers from primary to scrap prices. The purpose of this study is to evaluate empirically the dynamic interactions between primary and scrap metal prices through multivariate time series methods. In addition, the study expands the investigation at the level of volatility transmission, which has not been previously examined. The metal prices utilized are for copper, lead, and zinc for the period 1984–2001. The paper demonstrates differing long run and short run links. Scrap prices do not improve the long run interpretation of primary prices, but information flows from the scrap to the primary markets exist in the short run. Additionally, the copper and lead markets exhibit bidirectional information flows in terms of volatility transmission. The analysis provides valuable insight into the interactions of the primary and scrap metal sectors which can be used to improve forecasting and planning.