Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

雾对SO_2烟羽清除作用的研究

在雾稳定的条件下,研究了雾滴穿过SO_2烟羽沉降到地面的过程中吸收、析解以及酸化等过程。结果表明,雾对烟羽中SO_2的清除具有某些奇特的现象。即仅在离源较远的区域才表现出有限的清除作用:而在近源区,主要以析解为主,使源附近地面SO_2浓度增加,高架源成了低架源。雾滴在地面附近的这种析解作用,是造成雾天污染物浓度高的重要原因之一。     

南太平洋社会群岛塔希提岛(TAHITI)火山岩——一种典型的大洋岛屿玄武岩

塔希提岛火山岩属典型的大洋岛屿玄武岩(OIB)。该岛是法属波利尼西亚群岛中社会群岛链之一部分,火山活动可分三期:早期(1.7—1.3Ma),中期(1.3—0.6Ma)和晚期(0.6—0.3Ma)。早期火山岩兼有碱性和拉斑系列岩石,包括苦橄玄武岩、碱性玄武岩、拉斑玄武岩及少量玄武安山岩;中期火山岩主要有粗面玄武岩—粗面岩、碱性玄武岩和少量碧玄岩;晚期则以碧玄岩为主,并有部分碱玄岩出现。火山岩的这种岩性变化表明其岩浆由早到晚从富镁、硅弱不饱和向富碱和硅强烈不饱和演化。 社会群岛火山链的火山活动以平均11cm/a的速率从西北向东南迁移,与MORB相比,所有塔希提的岩石皆富大离子亲石元素并有较高的~(87)Sr/~(66)Sr比值,这一特征可能与其特殊的源区成分有关,即富集的地幔热柱或大洋岩石圈。早期岩石是地幔热柱和少量洋壳的部分熔融产物的混合体,故既有拉斑系列又有碱性系列。随着火山活动远离存在热柱的热点区域,洋壳部分熔融的程度逐渐降低,因而其产生的熔融体也越来越富碱,~(87)Sr/~(66)Sr比值也相应有所降低。     

柴油机排放碳颗粒物的催化燃烧

在热天平装置上考察了柴油机和碳颗粒物燃烧催化剂的活性，讨论了样品制备因素对样品失重的影响，这些因素包括碳颗粒物组成、催化剂栽体、催化剂与碳颗粒物质量比，着重筛选了催化剂的组份，得到了组份催化剂ＣｕＣｌ２－ＫＣｏ－ＮＨ４ＶＯ３其５５０℃焙烧后能使样品的Ｔｍ和Ｔｆ值都降低１８０℃以上，并对催化剂的热稳定性进行了研究。     

含铅,无铅汽油车尾气排出物遗传毒性比较

利用台架试验模拟汽车行驶工况，收集了发动机使用无铅汽油，含铅汽油燃烧后的尾气颗粒物，对其中吸附的有机物进行了提取，并以Ａｍｅｓ试验，中国仓鼠肺细胞体外微核实验等方法，从基因，染色体水平检测了两种颗粒提取的遗传毒性。     

上海市大气中非甲烷烃与机动车尾气排放研究

采用特征性化合物法和统计法相结合的方法,对上海市大气中非甲烷烃(NMHC)与作为机动车尾气特征性化合物的CO与Pb进行了相关性分析。结果发现,NMHC与Pb在显著性水平0.01下显著性相关,相关系数达到0.593(n=18);NMHC与CO小时均值相关系数达到0.495(n=2329),日均值相关系数达到0.581(n=114)。从而判断机动车尾气排放已经逐渐成为上海市大气中NMHC的主要贡献者。     

麻石文丘里洗涤吸收器在APV尾气处理上的应用

介绍了ＡＰＶ喷雾干燥尾气的性质，原尾气系统存在的问题，改造中采取的措施、原理、流程和取得的效果。实践证明，用“麻石文丘里一次降温、洗涤—ＸＰ型塔板二次洗涤—旋流除雾器除雾”的改造方案，取代原“换热器降温—喷淋塔洗涤—折流脱水器脱水”的流程，取得了良好的降温、洗气和除雾效果，且工程费用低。     

Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

汽车尾气净化催化剂Ag/SAPO-34选择性催化还原NO

评价了Ag/SAPO-34分子筛催化剂选择性还原NO的活性,并运用漫反射红外光谱原位研究NO在Ag/SAPO-34催化剂上的选择性催化还原机理.结果表明Ag/SAPO-34有良好的低温活性,在氧气浓度为3.6%和温度为573K～673K时NO还原成N2的转化率达70%;催化剂活性随C3H6浓度的增加而升高,随空速的增加而稍有下降.基于漫反射红外光谱,认为反应机理为:NO、丙烯和氧反应,在Ag/SAPO-34催化剂上生成吸附的有机-氮氧化物,再由这些吸附物种分解成N₂,催化还原的关键是形成有机-氮氧化物中间体.氧的作用是充分促进丙烯活化以及增加NO_x吸附态含量,并且氧的存在是有效产生一系列中间物不可缺少的条件.     

制氧机组排气噪声消声器设计

冶金行业制氧机组氧气排气噪声属 4极子亚声速喷注噪声 ,其声功率与流速的八次方成正比 ,产生的噪声很强。本文以河北某钢铁集团公司为例 ,对制氧机组排气噪声的特性进行了探讨 ,设计了阻抗复合式三级扩容减压小孔喷注消声器 ,工程实施后证明 ,消声器设计合理 ,达到了预期的降噪效果