用AutoCAD软件对弯管芯棒进行快速图解设计

介绍了利用AutoCAD软件对管材弯曲工艺中弯管芯棒进行快速图解设计的方法。利用该法可对不同弯曲半径、弯曲角度、壁厚的管材的弯管芯棒进行快速优化设计。利用Auto CAD进行图解法设计的弯管芯棒尺寸准确 ,结构合理 ,加工工艺性好 ,使用寿命长     

开关电源电磁兼容可靠性设计的一种新方法

首先介绍了开关电源电磁兼容问题产生的原因,研究了提高其可靠性的传统设计方法.提出了一种用以提高电子设备在电磁干扰影响下可靠性的地线加电容法.并对这种方法进行了详细说明,探讨了在实际工程应用中的具体方法,证明了其有助于开关电源以及其它电子产品电磁兼容可靠性设计的改善和提高.     

Detection of Escherichia coli in wastewater based on enzyme immunoassay

This research describes a fast detection method on the basis of enzyme-linked immunosorbent assay (ELISA) for Escherichia coli in drainage of wastewater treatment plants. Optimized conditions such as the reaction format (sandwich or direct), the concentrations of diluted horseradish peroxidase (HRP)-E. coli conjugate, and anti-HPR antibody and pretreatment of E. coli were studied. Those results showed that the linear range of detection for E. coli was 10 cfu/mL-6 × 10⁴ cfu/mL. Compared with conventional methods, it is a convenient and sensitive detection method with low cost. Translated from Environmental Science, 2005, 26(5): 128–131 [译自: 环境科学]     

Hamburgers and the Rainforest – a Review of Issues and Evidence

This paper examines the relationship between North American beef consumption and deforestation in South and Central America. Some writers have argued that consumption of hamburgers in North America, particularly hamburgers consumed in fast food restaurants, contributes to the depletion of the rainforest in South and Central America. We survey the published policy literature on the causes of rainforest depletion in the region. We also review the published estimates of the rate and extent of clearing of rainforest that has occurred in South and Central America since 1970. Finally, we review the data on beef imports and consumption in Canada and the United States in a effort to assess the importance of South and Central America as suppliers of beef to the North American market. We conclude that the relationship between beef consumption in North America should not be considered an important cause of forest depletion in South and Central America. Domestic policies and market forces in the countries where rainforests are located are the leading causes of rainforest depletion in this region. This lesson seems to have been lost on some popular and even some textbook writers on this subject. This revised version was published online in August 2006 with corrections to the Cover Date.     

滇池蓝藻快速热解液化制取生物油的初步研究

文章采用实验室规模的固定床反应器作为实验平台,对蓝藻快速热解液化制取生物油的可行性进行了探讨,并对影响液化性能的诸多因素,如热解温度(300～700℃)、载气流量(0～400 mL/min)、原料粒径(d＜0.08 nn,0.15＜d＜0.25 mm,0.25＜d＜0.38 mm,0.38＜d＜3.35 mm,d＞3....     

快速高效去除微囊藻的GO/QPEI复合纳米材料

本研究合成了一种新型高效的去除铜绿微囊藻(Microcystis aeruginosa)的氧化石墨烯/季铵盐聚乙烯亚胺(GO/QPEI)纳米复合材料.GO/QPEI在pH为4~10的条件下都具有高效去除M.aeruginosa的能力,其去除能力在2 min内可达96%以上.GO/QPEI对微囊藻的吸附更符合Freundlich方程,最大吸附量为5.58×1011cells·mg-1.吸附动力学表明GO/QPEI的假二级吸附反应.GO纳米片和QPEI的协同效应是其高效去除微囊藻的主要机制.     

高浊度污水快速净化新技术

介绍了一种快速净化高浊度污水的新技术,该技术根据化学强化一级处理(chemically enhanced primary treatment,CEPT)技术、闪速混合(flash mixing)技术、旋流和点涡流絮凝技术、悬浮泥层过滤技术和过滤水力学原理等理论,采用物理化学法去除污水中的有机污染物和其他有害杂质,其有着流程简单可靠、投资和运行费用低、占地少、净化效果好的优势.     

生物质废弃物快速热解制取富氢气体的实验研究

采用管式炉对红松锯屑快速热解制取富氢气体进行了实验研究,分析了反应器温度、物料粒径和催化剂对热解产物组成的影响.结果表明高温能加快生物质快速热解进程,减少炭和焦油生成量,利于富氢气体的生成,800℃时气态产物比例可达56.9 wt.%,气态产物中H2体积分数由4.3%(500℃下)上升至17.2%,H2 CO体积分数达68.3%.小粒径能增大热解气态产物的比例,但对气态产物组成的影响很小,这可能与红松锯屑本身质地疏松有关.以与生物质直接混合方式添加的煅烧白云石能使热解产物中H2含量增加,但造成产气过程变缓,炭生成量增多,富氢气体总产量未能得到提高.     

DPIV技术测量流冰速度应用研究

基于数字信号分析原理,对连续两幅图像进行互相关分析,寻找互相关函数的峰值;应用数字粒子图像测速(digital particle image velocimetry)技术,并通过计算机VC编程,解决了用于雷达测量单点流冰速度的不足;为大范围区域内流冰场瞬时速度的计算,实时雷达测量辽东湾海上流冰速度场提供了有应用价值的方法.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.