Sustainability: a Dissent

Abstract:  Broadly conceived and considered in its many usages, sustainability has grave defects as a planning goal, particularly when used by conservationists: it confuses means and ends; it is vague about what is being sustained and who or what is doing the sustaining; it is uninspiring; it is little more than Pinchot-era conservation (and thus ignores the many lessons learned since then); it need not be linked to land, to the land's functioning, or to any ecological science; it need not include a moral component; it is consistent with the view of humans as all-powerful manipulators of the planet; and, in general, it is such a malleable term that its popularity provides only a facade of consensus. When sustainability is defined broadly to include the full range of economic and social aspirations, it poses the particular risk that ecological and biodiversity concerns will be cast aside in favor of more pressing human wants. Given these many defects, the conservation movement should discard the term in favor of a more alluring goal, attentive to nature and its ecological functioning. A sound goal would incorporate and distill the considerable ecological and moral wisdom accumulated since Pinchot's day while giving conservationists the rhetorical tools needed to defend the land against competing pressures. In our view, conservation would be well served by an updated variant of "land health," Aldo Leopold's ecologically grounded goal from the 1940s. Land health as an independent understanding should set the essential terms of how we live and enjoy the earth, providing the framework within which we pursue our many social and economic aims.     

The study of biological activity of transformation products of diclofenac and its interaction with chlorogenic acid

In the present work we compared the biological activity of DCF, 4′-OHDCF and 5-OHDCF as molecules of most biodegradation pathways of DCF and selected transformation products (2-hydroxyphenylacetic acid; 2,5-dihydroxyphenylacetic acid and 2,6-dichloroaniline) which are produced during AOPs, such as ozonation and UV/H₂O₂. We also examined the interaction of DCF with chlorogenic acid (CGA). CGA is commonly used in human diet and entering the environment along with waste mainly from the processing and brewing of coffee and it can be toxic for microorganisms included in activated sludge. In the present experiment the evaluation of following parameters was performed: E. coli K-12 cells viability, growth inhibition of E. coli K-12 culture, LC₅₀ and mortality of Chironomus aprilinus, genotoxicity, sodA promoter induction and ROS generation. In addition the reactivity of E. coli SM recA:luxCDABE biosensor strain in wastewater matrices was measured. The results showed the influence of DCF, 4′-OHDCF and 5-OHDCF on E. coli K-12 cells viability and bacteria growth, comparable to AOPs by-products. The highest toxicity was observed for selected, tested AOPs by-products, in comparison to the DCF, 4′-OHDCF and 5-OHDCF. Genotoxicity assay indicated that 2,6-dichloroaniline (AOPs by-product) had the highest toxic effect. The oxidative stress assays revealed that the highest level of ROS generation and sodA promoter induction were obtained for DCF, 4′-OHDCF and 5-OHDCF, compared to other tested compounds. We have also found that there is an interaction between chlorogenic acid and DCF, which resulted in increased toxicity of the mixture of the both compounds to E. coli K-12, comparable to parent chemicals. The strongest response of E. coli SM biosensor strain with recA:luxCDABE genetic construct in filtered treated wastewaters, comparable to control sample was noticed. It indicates, that E. coli SM recA:luxCDABE biosensor strains is a good tool for bacteria monitoring in wastewater environment. Due to toxicity and biological activity of tested DCF transformation products, there is a need to use additional wastewater treatment systems for wastewater contaminated with pharmaceutical residues.     

珠江口夏季海陆源有机碳的模拟研究——分布特征、贡献比重及其迁移转化过程

基于经过验证的三维水动力-水质模型,对珠江口夏季有机碳进行海陆源区分,并对海陆源有机碳的分布特征、贡献比重及其通量过程进行研究.结果表明,水平方向上,珠江口夏季陆源（海源）有机碳浓度从口门到外海逐渐降低（升高）,在表、底层海水中平均浓度分别为1.45和0.87mg/L（0.97和1.05mg/L）;垂直方向上,在层化水域陆源（海源）有机碳浓度从上到下逐渐递减（升高）,在非层化水域海陆源有机碳浓度垂向分布较为均匀.珠江口夏季海源有机碳贡献率表层海水低于底层海水,平均贡献率为48.26%,沿向海方向海源有机碳贡献率逐渐增加--从内伶仃洋水域的4.43%逐渐提升到外伶仃洋东侧水域的81.20%.珠江口水动力条件复杂,在径流、潮汐、季风等因素的作用下陆源有机碳向海输送且向海输送量逐渐递减;海源有机碳在不同水域动力输送特征不同,西南水域向海输送,向海输送量逐渐递增;东北水域向岸输送,向岸输送量逐渐递减.陆源有机碳生化反应活性较弱,只有小部分被生化过程消耗,其迁移转化主要由沉降过程控制,而海源有机碳的迁移转化,则由口门的动力输送过程主控向外海的生化耗碳过程主控过渡.此外,海源有机碳沉降作用明显低于陆源有机碳,生化作用明显高于陆源有机碳.     

金属体积成形过程有限元模拟中六面体网格重划技术的研究

针对金属体积成形过程有限元模拟中的网格重划问题 ,提出了基于边界构形的有限元网格重划技术 ,并对其中的一系列技术处理进行了详尽的讨论。将该技术应用于矩形块体镦粗过程的有限元模拟中 ,较好地解决了六面体网格重划问题。     

赣西北中部逆冲推覆构造的形成时间和形成模式

江西九岭地体南缘武功山地体北侧以及其间的萍乐盆地内，有大量的逆冲推覆构造分布。逆冲推覆构造的类型有两种──逆冲推覆型和重力滑覆型。逆冲推覆构造具有横向上对冲挤压，纵向上多层滑动的特征，据此笔者建立了一个可能的多层滑动──对冲挤压模式，并根据地质和同位素年龄资料讨论了逆冲推覆构造的演化历史，指出区内大规模逆冲推覆构造的形成时间为中生代晚期（119.6Ma）。     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

细密沟槽铝合金挤压件模具的改进

对细密沟槽铝合金挤压件的结构进行了分析,研究和探讨了该类冷挤压件的成形过程。通过对挤压过程中金属的流动,以及模具的受力分析和模具结构的改进,解决了该类零件在挤压过程中上模的断齿问题。     

塑料瓶的电磁成形封口研究

对塑料瓶的电磁成形封接工艺进行研究，通过对放电电压、电容、线圈位置等参数进行调节，得出了优化的封口工艺。试验结果表明线圈位置，电压对封口效果影响较大。     

板材成形新技术及其发展趋势(Ⅱ)

介绍了多点成形技术、激光成形技术、冲压智能化技术、成形过程的计算机仿真技术等几种柔性化程度高的板材成形新技术及其发展趋势