矿热炉炉壳安装作业危险性分析

为减少事故损失,必须对矿热炉安装施工危险源进行分析。基于此,对矿热炉安装工序中最重要工序炉壳安装应用作业危险性分析进行分析。将炉壳安装作业分成3大部分,用鱼刺图分析方法进行分析,总结出矿热炉炉壳安装中事故发生的主要原因并提出对策措施,以预防和减少事故的发生。     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Advanced molecular-fingerprinting analysis of dissolved organic sulfur by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry using optimal spray solvent

Molecular level characterization of dissolved organic sulfur (DOS) by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR MS) is necessary for further understanding of the role of DOS in the environment. Here, ESI spray solvent, a key parameter for ion production during ESI process, was investigated for its effect on the molecular characterization of DOS by ESI-FTICR MS. 100% MeOH as spray solvent was found for the first time to remarkably enhance the ionization efficiency of the majority of CHOS-molecules in NOM, which facilitated a total of 1473 CHOS-molecular formulas with one sulfur atom to be detected. The number of CHOS-molecular formulas obtained using 100%MeOH as spray solvent increased notably over 740 in comparison with those using 50% MeOH aqueous solution (731) or 50% ACN aqueous solution (653). Moreover, due to the enhancement of ionization efficiency of DOS during ESI processes, the tandem mass spectra of the NOM CHOS-molecules could be easily obtained using 100% MeOH as spray solvent, which were hardly obtained using 50% MeOH aqueous solution as spray solvent. The results of the tandem mass spectra suggested the first discovery of organosulfates or sulfonic acids in Suwannee River NOM sample. A simple method based on 100% MeOH as ESI spray solvent for advanced molecular characterization of DOS by ESI-FTICR MS was proposed and applied, and the results revealed more molecular information of DOS in sea DOM samples.     

郑州市氧化铝工业炉窑污染物及源谱特征

采用稀释通道采样法对郑州市一家拜耳法氧化铝企业及一家α-氧化铝企业的PM_2.5、PM₁₀样品进行采集,利用烟气分析仪检测SO₂和NO_x气体的质量浓度.对颗粒物样品中的38种化学组分进行分析,构建相应的源成分谱,运用分歧系数（CD）和组分差异权重分布函数R/U对其特征进行对比研究.结果表明：α-氧化铝源谱中以Cl^-为主（质量分数18.29%~25.21%）,拜耳法氧化铝源谱中以OC和NO₃^-为主（质量分数9.01%~41.87%）.源谱间的分歧系数（CD）显示,同一种生产工艺两种粒径间的源谱比较相似,相同粒径的两种生产工艺之间的源谱差异较大.R/U值对比结果显示,EC、Ca、F^-和Cl^- 4种元素可作为区分两种氧化铝生产工艺的标识组分.     

磁性氧化石墨处理乳化含油废水及磁致增强效应

以高铁酸钾为氧化剂,基于改进Hummers法制备了新型磁性氧化石墨材料,在SEM、FTIR、氮气吸脱附和表面接触角表征基础上,探究了该材料处理乳化含油废水的效果及磁致增强效应.结果表明：相较于石墨,磁性氧化石墨比表面积增大,表面有卷曲结构并负载着Fe₃O₄颗粒,具有含氧官能团,存在疏水性较强的微观孔隙结构.在外加磁场条件下,磁性氧化石墨团聚,形成疏水性宏观孔隙结构,利于乳化油滴的吸附和附着.磁性氧化石墨处理乳化含油废水的能力远好于石墨与粉末活性炭,且处理效率与磁场强度成正相关,COD去除率可达95%以上.使用后的磁性氧化石墨进行溶剂萃取或热处理,可以循环使用.磁性氧化石墨经过4次循环使用,热再生效率为92%,溶剂萃取再生效率为86%.以上研究为乳化含油废水的处理提供了一种有效的方法.     

螯合树脂在线富集——火焰原子吸收光度法测定水中微量Cu,Pb,Zn,Cd

对螯合树脂在线富集，火焰原子吸收光度法进行了条件试验。试验证实方法对Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ４个元素检出浓度可达μｇ／Ｌ级，校准曲线性、样品重现性及准确度可满足测定要求。     

火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜

采用火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜。鱼内脏经组织捣碎机捣成匀浆后，加硝酸消解；底泥则经氢氟酸和高氯酸消化。该方法具有灵敏度高，精密度和回收率较好等特点。     

Comparison of Two Manual Methods of Nitrogen Dioxide Determination in Ambient Air

Sodium arsenite (modified Jacobs and Hochheiser method; hereafter referred as SA), the most widely used manual monitoring method for determination of nitrogen dioxide (NO₂) in ambient air, particularly in developing countries has been evaluated and compared with US EPA recommended equivalent method of TGS-ANSA (hereafter referred as ANSA). NO₂ concentrations generated from laboratory test atmosphere were analyzed by these two methods and were compared statistically. Laboratory evaluations showed that SA method has high sensitivity to different sampling conditions, which normally vary during actual field monitoring. Hence, correction factors for absorption efficiency were estimated for SA and ANSA methods. Absorption efficiency of NO₂ in SA method was found to be much lower (64%) as against the reported value of 82% at the method recommended sampling conditions, whereas for ANSA method, it was found 1.0 as against the reported value of 0.93. After applying derived correction factors, both the methods produced almost similar concentration values of NO₂.     

过硫酸钾氧化-紫外光度法测定总氮方法的改进

过硫酸钾氧化紫外光度法测定总氮的空白吸光度高的主要原因是：K2S2O3是220nm波长上有特征吸收，适当降低K2S2O3、NaOH的用量，延长消解时间，使用二次蒸馏水，用低浓度亚砷酸钠溶液，还原消解后剩余的极少量的K2S2O3，可以降低空白吸光度。K2S2O3-NaOH碱溶液不稳定，使用期短，三天后氧化能力迅速降低，原因是：K2S2O3溶液中，加入NaOH，加速了K2S2O3的分解。K2S2O3和NaOH分别配制，并在K2S2O3溶液中，加入少量HCl，抑制其水解。两种溶液可使用半年以上时间。     

恶臭污染防治技术及工程实践

目前，恶臭污染对人类生活的危害日益加剧，文中介绍了几种恶臭污染物的防治技术。对生物滴滤池 活性炭吸附工艺进行了探讨，工程实例表明具有良好的治理效果。