金属基复合材料及其超塑性技术的发展

颗粒或晶须增强铝基复合材料具有优良的性能。目前其制备工艺主要采用粉末冶金法和挤压铸造法。这类铝基复合材料已经有许多应用实例。铝基复合材料超塑性是近年来开发的新技术,可解决其成形性差的加工难题,扩大其应用领域。     

新疆宝浪油田污水达标回注技术应用

新疆宝浪油田污水处理原来采用外排方式,严重污染了周边环境。为此,通过对处理工艺进行的改进,对分散自控系统的升级改造及对处理药剂进行了重新筛选。改造后终端出口水质的悬浮物由200 mg/L下降到3.93 mg/L,去除率为96%,含油量由200 mg/L降为0.79 mg/L,去除率为99%,含铁为3.9 mg/L,细菌总数为4.5个/mL,硫酸盐还原菌为4.5个/mL,处理后的污水水质达到了《碎屑岩油藏注水水质推荐指标及分析方法》标准回注要求。     

矿渣与工业废渣改良黄土的性能与机理研究进展

黄土在世界上分布面积较广,在我国也有约60×104 km2的分布,具有湿陷性是其区别于其它区域性土的最显著特点,并由此引发造成各种地质灾害和工程问题.采用石灰、水泥或高分子材料等对其进行改性以达到消除湿陷性或提高黄土强度的目的,是岩土工程领域的重要课题.选用矿渣和工业废渣作为改性参料,用以研究改性黄土的力学特性变化和改...     

水淬渣人工湿地强化除磷作用研究

研究了水淬渣的磷吸附-解吸效果,构建了以水淬渣为主要基质的模拟垂直流人工湿地系统,分析了水力停留时间(HRT)和污染负荷变化对污水中磷去除的影响,探讨了湿地上行、下行流单元各层基质的除磷贡献.结果表明,水淬渣基质的磷饱和吸附量为3 333 mg.kg-1,其水溶性钙含量为0.084%,pH值为7.54,适合作为湿地除磷基质.HRT与磷除去率呈正相关,当HRT从1 d缩短为0.5 d时,TP去除率降低5.9%~4.7%,当HRT从2 d缩短为1 d时,TP去除率降低2.4%~4.7%,HRT为1 d条件下,水淬渣湿地的磷去除率>85%,说明无限延长HRT无益于强化除磷,适宜的HRT为1 d.在进水浓度稳定的条件下,进水污染负荷与磷去除率呈负相关,当污染负荷范围在12.2~36.8 g.(m2.d)-1时,水淬渣湿地的磷除去率可维持在85%,当污染负荷达到48.9 g.(m2.d)-1后,水淬渣湿地的磷除去率下降至65%,当污染负荷<36.8 g.(m2.d)-1时,水淬渣湿地的磷去除率>82%,说明高污染负荷可抑制基质表面及孔隙中Ca、Al等吸附磷的活跃位点,适宜的进水污染负荷为24.5~36.8g.(m2.d...     

典型行业再利用土壤重金属含量分布、来源解析及生态风险评价

为深入探究典型行业再利用土壤重金属污染特征及生态风险状况,基于上海市嘉定区49个地块315个不同深度剖面土壤样品数据,采用地累积指数和潜在生态风险指数评估Cd、Pb、Cu、Zn、Ni、Hg和As这7种重金属含量特征和潜在生态风险程度,并利用源解析受体模型（APCS-MLR）和正定矩阵因子分解模型（PMF）解析其污染来源.结果表明：①研究区土壤中除As外,其余重金属均不同程度超过上海市土壤背景值,表层土壤中Cd、Pb、Cu、Zn、Ni和Hg含量分别是背景值的3.54、2.34、2.91、1.20、3.75和4.40倍;7种重金属含量随着土壤垂直剖面深度的增加逐渐降低,重金属在表层土壤中存在一定程度的富集,人类活动影响了重金属在土壤中的分布规律.②研究区内APCS-MLR和PMF两种受体模型均识别出土壤重金属4种主要来源,源1（Cu、Zn和Pb）为金属制品和汽车制造混合源,源2（Ni和Cd）为电镀企业来源,源3（Hg）主要为化工企业来源,源4（As）为自然源,两种受体模型结合运用,进一步提高源解析的精准度和可信度.③地累积指数由大到小表现为：Hg（1.54）>Ni（1.32）>Cd（1.21）>Cu（0.96）>Pb（0.64）>Zn（-0.33）>As（-1.02）;潜在生态风险指数结果显示,研究区综合潜在生态风险指数RI值在32.50~4 910.97,均值为321.40,整体呈现较强潜在生态风险,再开发利用工业场地土壤中重金属Hg、Ni和Cd的污染值得进一步关注.     

湿地基质及阴极面积对人工湿地型微生物燃料电池去除偶氮染料同步产电的影响

本研究采用人工湿地型微生物燃料电池处理偶氮染料X-3B,实现降解偶氮染料同步产电的效果.为了构建性能最优的人工湿地型微生物燃料电池(CW-MFC)系统,本研究主要从湿地基质和阴极面积两个方面研究系统构型对去除X-3B同步产电的影响,提高系统性能.研究表明以粒径10 mm、孔隙率30%的小石子作为湿地基质构造的CW-MFC系统微生物生物量最大,去除X-3B效果最好,脱色率高达92.70%,但其产电性能最差.较小的粒径和孔隙率使底层微生物生物量增加,促进X-3B的去除,但随着湿地基质粒径和孔隙率的减小,导致阴阳极营养物质不足,系统传质阻力增加,抑制了系统产电性能.X-3B的去除效果随着阴极面积的增加而提高直到阴极面积为594 cm~2时取得最大脱色率99.41%.当阴极面积继续增加时,CW-MFC系统产电性能上升趋势趋于平缓,X-3B去除效果呈现下降趋势,这是因为阴极反应过快导致更多的阳极电子输送到阴极用于产生电流,与X-3B发生反应的电子减少,阳极成为提高CW-MFC系统性能的限制因素.     

改良倒置A2/O工艺设计

在目前广泛采用的AO、A2O、倒置A2O等工艺的基础上,为提高脱氮除磷效率,提出改良倒置A2O工艺。并对其工艺的特点、设计和脱氮除磷效率进行了详细的研究和分析。     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

基于生态—经济协调发展的乡镇空间功能分区

按提供产品的类别,乡镇尺度空间由生态空间、农业空间和建设空间组成,这3部分空间共同承载着乡镇社会经济发展的重任。坚持生态保护对发展的约束与支撑功能并存的理念,建立以生态约束为前提,并与开发建设协同推进的分区指标体系、技术方法及应用模式,是生态文明战略下空间功能分区的有益探讨。以南京市六合区雄州街道为案例,借助Arc GIS空间分析工具,采用互斥性矩阵分类法,通过对生态约束、农业发展、工业发展与人居环境等建设开发适宜性的单项与综合评价的集成,构建生态、农业和建设空间布局的总体架构,实现了街镇空间功能的整合与科学定位;划分禁止建设区、限制建设区、适宜建设区和已建设区等四大类功能区,并提出各功能区的生态环境保护措施与产业发展导向,为实施区域发展与生态保护的协同推进提供了依据。     

Combined use of molecular biology taxonomy, Raman spectrometry, and ESEM imaging to study natural biofilms grown on filter materials at waterworks

DNA-based population analysis was applied in combination with Raman spectrometry and Environmental Scanning Electron Microscopy for the characterisation of natural biofilms from sand and activated carbon filters operated for a long term at a municipal waterworks. Whereas the molecular biology polymerase chain reaction combined with denaturing gradient gel electrophoresis approach provides a deeper insight into the bacterial biofilm diversities, Raman spectrometry analyses the chemical composition of the extracellular polymer substances (EPS), microorganisms embedded in EPS as well as other substances inside biofilm (inorganic compounds and humic substances). Microscopy images the spatial distribution of biofilms on the two different filter materials. In addition, bacterial bulk water populations were compared with biofilm consortia using the molecular fingerprint technique mentioned.Population analysis demonstrated the presence of more diverse bacterial species embedded in a matrix of EPS (polysaccharides, peptides, and nucleic acids) on the sand filter materials. In contrast to this, activated carbon granules were colonised by reduced numbers of bacterial species in biofilms. Besides α-, β-, and γ-Proteobacteria, a noticeable specific colonisation with Actinobacteria was found on activated carbon particles. Here, the reduced biofilm formation came along with a decreased EPS synthesis. The taxonomy profiles of the different biofilms revealed up to 60% similarity on the same filter materials and 32% similarity of different materials. Similarity of adherent communities from filter materials and bulk water populations from the filter effluent varied between 36% and 58% in sand filters and 6–40% in granular activated carbon filters.The biofilm investigation protocols are most crucial to subsequent acquisition of knowledge on biofilm dynamics and bacterial contributions to transformation or adsorption processes in waterworks facilities.