Z形弯曲件及其模具的特点分析

此文对Z形弯曲件做了较系统的分析归类,并介绍了几种常用的Z形弯曲模的特点,以及这些模具的适应范围。     

弯曲线不重合V形件的模具设计

弯曲线不重合且其精度要求较高的V形件的弯曲,是一较为棘手的问题。本文介绍了一种利用顶板侧壁的斜面,迫使下模框内摆块转动,从而克服工件回弹,并确保弯曲精度的V形弯曲模的设计。     

盒形件底面窄缝长孔冲压模具的设计

分析了窄缝长孔的冲裁工艺性,针对凸模高度悬臂和凹模孔间距过小的情况,采取镶块结构和保护套形式,解决了凸模、凹模断裂等失效的工艺问题。     

直接磁场对特定厌氧污泥活性影响的研究

在优势菌生物除铬系统中悬挂表面磁场分别为0～6 mT和0～20 mT的磁片,分别控制磁片之间的磁场强度介于0～4.5 mT和0～14 mT,以未加磁场的对照系统作为参照,考察试验污泥活性的变化.试验结果表明,反应器中磁场强度为0～4.5 mT时,对厌氧活性污泥活性的促进效果较好,最大产甲烷速率(Umax.CH4)达64.3 mL CH4/g VSS·d,比非磁场系统提高20.6%,消耗单位COD产甲烷量为0.140 mL CH4/mg COD,比系统非磁场系统提高70.7%.同时发现了磁场的引入,提高了试验污泥利用COD物质生成甲烷的效率,对于低有机负荷重金属废水的生物净化尤其意义重大.     

国有划拨土地权益金额确定问题的探讨

随着城市建设和经济发展，划拨土地使用权将进入市场流通。明确划拨土地使用权的财产权性质、合理评估其价格已很必要。与出让土地使用权相比，划拨土地使用权具有特殊性，其价格不宜采用先评估出让土地使用权后扣除出让金的方式评估。作为尝试，可以先评估划拨土地基准地价，用以指导划拨土地价格评估，衡量评估结果。     

The persistence of insecticidal chemicals in soils treated with granular formulations of aldicarb and their uptake by potato plants

Abstract

Potatoes were grown in Plainfield sand and muck treated, in furrow, with aldicarb (Temik 15G, 3.36 kg Al/ha). .Soils were contained in 2 m^z field plots and had not been treated previously with pesticides. Soil, seed pieces, foliage and tubers were analyzed for the insecticide and its sulfoxide and sulfone metabolites during the 12 wk following planting. The disappearance of aldicarb from the soil was accompanied by partial conversion to the sulfoxide and sulfone. After increasing rapidly during the first 2 wk, the aldicarb concentration in the seed piece declined and a similar concentration of aldicarb sulfoxide accumulated which subsequently slowly disappeared. Aldicarb sulfoxide was the major insecticidal material in the new foliage. High initial concentrations, observed at 3–4 wk, declined by about 90% after 6 wk. Aldicarb sulfoxide residues of 2–4 ppm in the first new tubers at 6 wk declined by 90% by 12 wk. Potatoes were also grown under greenhouse conditions in Plainfield sand treated with Temik 10G at rates equivalent to 1.68, 3.36 and 6.72 kg Al/ha. Maximum aldicarb sulfoxide concentrations in soil, seed piece and foliage increased with application rate. The sulfoxide was much more persistent in the soil and foliage than in the field experiment indicating the importance of environmental factors to its behaviour in both soil and potato plants.     

浅析某型导爆索组件环境试验中的断裂问题

目的分析某型导爆索组件断裂问题产生的原因。方法采用平板试验件模拟实际使用状态,用于考核导爆索组件的环境适应性及分离功能。结果试验件中导爆索组件均出现了断裂,且存在三处明显磨痕,而且有一发平板试验件的辅助限位板出现了断裂。结论辅助限位板刚度不足,导致导爆索组件出现疲劳断裂,增加辅助限位板厚度,可有效提高其刚度,防止断裂问题产生。     

异形闭合件弯曲成形模的设计与制造

根据一种异形闭合件的产品要求 ,对其弯曲工艺作了具体分析 ,克服了技术难点 ,设计制造了一套简单实用的弯曲成形模 ,达到了产品质量要求 ,也为类似形状制件的弯曲成形模的设计提供了一种新方法