过电位抛光增材制造双极板流道结构及性能研究

目的 研究过电位抛光对不锈钢异形截面微流道内壁成形性及双极板性能的影响。方法 采用电化学实验、扫描电子显微镜（SEM）、粗糙度测试分别对激光粉末床熔融技术成形异形截面微流道进行测试分析,研究抛光时间对微流道内壁表面形貌、典型缺陷、表面粗糙度及双极板耐腐蚀性的影响。结果 在抛光前10 min,微流道内壁的质量得到有效提升,随着抛光时间的延长,其表面粗糙度达到稳定值,同时典型缺陷也由黏粉、半熔金属颗粒等局部缺陷逐渐变化到球化、挂渣、阶梯效应等大范围缺陷,直至出现点蚀现象。抛光时间在5～15 min内,LPBF成形316L不锈钢表面质量提升,随着抛光时间的增加,其耐腐蚀性下降。结论 采用过电位抛光工艺并选择适当的过电位抛光时间,能有效提升微流道内壁成形质量及双极板耐腐蚀性能。     

无人机用航空铝合金材料激光毁伤特性缩比实验研究

目的 通过开展激光对无人机用航空铝合金材料的缩比毁伤实验,为研究激光对无人机的毁伤特性及规律奠定基础,为激光武器的战技指标论证提供科学可靠的参考数据。方法 采用缩比模型法,利用激光对航空铝靶板进行毁伤实验,记录烧穿时间、光斑直径、激光功率等参数,并通过等效性修正实验对毁伤规律进行分析。结果 毁伤缩比实验中,随着尺度律cP的增加,航空铝板的平均击穿时间逐渐延长,击穿所需的激光能量密度基本符合线性增加规律。修正实验中,随着航空铝板厚度的增加,击穿时间逐渐延长,实验拟合曲线与理论曲线具有较好的一致性。结论 通过缩比实验与修正实验,可建立激光对航空铝合金材料的毁伤模型公式,根据激光参数推算毁伤阈值及击穿时间。     

激光烧蚀皮革过程中的废气成分研究

皮革在激光烧蚀过程中会产生大量具有恶臭气味的有机废气,严重影响空气质量。为了评估该类型气体危害,分别利用紫外可见分光光度计和气相色谱-质谱联用仪,检测了天然皮革和人造革在激光烧蚀过程中的废气成分。结果显示烧蚀天然皮革所产生的废气中含有NO、NO2、SO2、二氨基丙烷和丙烯酸甲酯,烧蚀人造革所产生的废气中含有NO、NO2、甲硫醇、二硫化碳、乙二醇、二甲基二硫醚、丙二醇、乙二醇二甲醚和硫代乙酸甲酯。其中,甲硫醇、二硫化碳、二甲基二硫醚和乙二醇二甲醚都是产生恶臭的有机成分。研究为该类型废气的治理提供了基础数据和依据。     

Wood-Specific Polycyclic Aromatic Hydrocarbon (PAH) Patterns in Soot Using Gas Chromatography-Atmospheric Pressure Laser Ionization-Mass Spectrometry (GC-APLI-MS)

If organic matter is burnt, the combustion of wood produces the highest amounts of polycyclic aromatic hydrocarbons (PAHs) compared with other fossil energy sources such as oil, coal, or gas. Emissions from wood combustion are increasingly of special interest due to the rising use of wood as a renewable energy source in residential heating in Europe. To the authors' knowledge, reproducible wood-specific PAH patterns in soot were identified for the first time by use of a sampling interval of only 5 min in this study. The short sampling interval was enabled by the very sensitive analytical method of gas chromatography–atmospheric pressure laser ionization–mass spectrometry (GC-APLI-MS) applied. The analysis of 40 PAH of soot from wood logs of spruce, pine, larch (softwood) and beech, birch, oak (hardwood), and wood pellets, as well as wood briquettes, showed 13.46–250.62 mg/kg for ∑40 PAH and 10.75–177.94 mg/kg for the U.S. Environmental Protection Agency PAH standard (without acenaphthylene and anthracene). Highest concentrations occurred in the samples from birch with bark, beech, and wood briquettes. Indeno[1,2,3-cd]pyrene, naphthalene, and alkylated naphthalenes were also detected. Significant concentrations of the very toxic dibenzopyrenes (up to 11.30 mg/kg) are reported. Softwood soot contained highest amounts of 2–4-ring PAH, followed by hardwood which is in accordance with the presence of highest amounts of abietic acid in softwood, a known precursor of retene and phenanthrene. PAH in soot from five spruce samples from different locations show a mean ∑40 PAH concentration of 13.46 mg/kg (n = 5, minimum 8.03, maximum 23.32 mg/kg, SD = 5.65) and exhibited a typical pattern that differed from all other wood soot samples. The distributions of alkylated naphthalenes of the spruce samples show a bell-shape distribution in contrast to the alkylated phenanthrenes/anthracenes of all samples (except the wood pellets), showing a slope distribution. The data indicate that wood-specific PAH patterns exist and under the applied conditions, spruce logs produced the least toxic soot.     

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

Corynebacterium glutamicum as an indicator for environmental cobalt and silver stress–A proteome analysis

Cobalt and silver are toxic for cells, but mechanisms of this toxicity are largely unknown. Analysis of Corynebacterium glutamicum proteome from cells grown in control and cobalt or silver enriched media was performed by two dimensional gel electrophoresis (2DE) followed by mass spectrometry. Our results indicate that the cell adapted to cobalt stress by inducing five defense mechanisms: Scavenging of free radicals, promotion of the generation of energy, reparation of DNA, reparation and biogenesis of Fe-S cluster proteins and supporting and reparation of cell wall. In response to the detoxification of Ag⁺ many proteins were up-regulated, which involved reparation of damaged DNA, minimizing the toxic effect of reactive oxygen species (ROS) and energy generation. Overexpression of proteins involved in cell wall biosynthesis (1,4-alpha-glucan branching enzyme and nucleoside-diphosphate-sugar epimerase) upon cobalt stress and induction of proteins involved in energy metabolism (2-methylcitrate dehydratase and 1, 2-methylcitrate synthase) upon silver demonstrate the potential of these enzymes as biomarkers of sub-lethal Ag⁺ and Co toxicity.     

齿轮轴修复安全性探讨

对催化装置四机组运行状态进行分析,介绍了齿轮箱高速轴及轴瓦损坏的情况,并分析说明了引起损坏的原因。结合生产实际确定合理的齿轮轴修复工艺方案,即采用激光融敷表面修复高新技术,迅速可靠地对齿轮轴进行修复,保证了设备运行的可靠性,从而实现安全生产、节能降耗、效益增长。     

脉冲激光发射模块电磁屏蔽效能仿真分析

目的 提高脉冲激光发射模块的电磁兼容性。方法 基于腔体的电磁屏蔽机理,使用HFSS软件,建立脉冲激光发射模块腔体模型,以电磁敏感度、电磁干扰2个方面对腔体电磁屏蔽效能进行仿真分析。结果 设计的双层屏蔽腔体在电磁波辐照频率为1~100 kHz时,屏蔽效能达到28 dB;电磁波辐照频率为0.2~18 GHz时,屏蔽效能达到47 dB。结论 当电磁波辐照频率在1~100 kHz时,腔体的屏蔽效能随频率的增加而增大。辐射源外部激励时,双层屏蔽腔体使用外层铁内层铜屏蔽效能较高。电磁波辐照频率在0.2～18 GHz时,腔体的屏蔽效能随频率的增大而减小,且发生了谐振效应。当腔体厚度相等时,双层屏蔽的屏蔽效能高于单层屏蔽。使用电缆连接器代替孔洞进行信号传输时,腔体屏蔽效能增加。     

钝顶螺旋藻突变株FBL的生理特性

利用倍频Ｎｄ：ＹＡＧ激光（λ＝５３２ｎｍ,ｐ＝５００ｍＷ,Ｓ＝１６０ｍＷ／ｃｍ＾２）对钝顶螺旋藻进行诱变处理,辐照１０ｍｉｎ,经分离获得藻丝开矿变成直形的钝顶螺旋突变株ＦＢＬ。对该变株ＦＢＬ的生长特性、藻多糖、氨基酸、β－胡萝卜素、叶绿素ａ等生化组成的研究。结果表明：与出发株相比,突变株ＦＢＬ生长速度加快;β－胡萝卜素含量提高２２．３％;藻多糖提高４２．０％;氨基酸增幅５．２％,氨基酸的组成比例发