Coat color polymorphism in populations of the northern mole vole in the Ural Region

Collections made in the course of long-term field studies on ecology of the northern mole vole Ellobius talpinus Pall. in the Ural Region and neighboring areas (more than 2000 individuals from 24 points of the species range) were used to analyze geographic variation in its coat color (color morphs). On the basis of long-term observations (1985–1999) on marked animals from a polymorphic population (Kurtamyshskii raion, Kurgan oblast), the life spans of males and females and the dependence of life span on population density and structure were estimated in animals of different color morphs. Each color morph of E. talpinus was shown to have specific features of the seasonal dynamics of age structure and migrations.     

Fluctuations of Population Size and Structure in the Northern Mole Vole: Preliminary Analysis

Long-term stationary studies on the ecology of the northern mole vole (Ellobius talpinus Pall.), performed by the mark–recapture method from 1985 to 1997, have provided original data on population dynamics and structure. The analysis shows that, to reveal cyclic fluctuations of population size in this species, the period of three years should be taken as a unit of time for estimating the duration of one phase. The 12-year population cycle in E. talpinus has four distinct phases: an increase, a peak, a decline, and a minimum. At each phase, the population is characterized by certain features of family structure, age composition, birth and death rates, and the composition of migrants.     

关中地区飑线天气的预测及灾害对策探讨

对１９６１～１９９０年发生在陕西省关中地区的飑线天气及其灾害进行了统计分析，并从天气形势背景方面对飑线的发生发展进行了研究和分析，同时就飑线的预测和防灾对策进行了探讨。     

反舰导弹命中精度预测与评估

目的解决反舰导弹命中精度受试验航区及靶场试验环境等客观条件制约,难以通过飞行试验得到客观全面评估的问题。方法在对影响反舰导弹命中精度的主要因素进行分析的基础上,利用实际环境条件下的飞行试验数据,构建基于偏最小二乘回归的命中精度模型,实现对反舰导弹各种使用环境条件命中精度的定量评估。结果在构建基于偏最小二乘回归的命中精度模型后,可以实现对90°发射扇面角、20 m/s侧风以及300 km最大射程等实际试验无法考核的边界使用环境条件下反舰导弹的命中精度进行定量评估。结论通过实例分析表明了方法的有效性和可行性,可以实现有小样本条件下对反舰导弹命中精度的评估。     

空空导弹定延寿技术应用研究

介绍了国外典型的定延寿方法,以美国为代表采用的跟踪监测法和以俄罗斯为代表采用的加速试验法,之后概述了国内常用的厂内寿命试验法、领先使用法、外场信息法、工程分析法、加速试验法。在此基础上,总结了适用于国内空空导弹开展定延寿工作的方法,最后对深入开展空空导弹定延寿技术研究提出了几点建议。     

喷丸强化技术在某型作动筒延寿修理中的应用

目的将某型作动筒的寿命由6000±150起落延长至12 000±150起落。方法采用喷丸强化技术对作动筒的主要承力零件进行喷丸强化处理,提高零件的抗疲劳和抗应力腐蚀性能。通过疲劳寿命试验验证对比喷丸强化处理前后典型零件和作动筒的寿命指标是否达到了预期目标。结果喷丸强化处理前的3件前耳环螺栓试验循环次数均未超过1.8×10~6即断裂,喷丸强化后达到3.6×10~6时仍未断裂。喷丸强化处理后的4件主耳环螺栓与喷丸强化处理前对比,断裂时的试验循环次数均有不同程度的提高,均值寿命比值大于2.36。喷丸强化处理前后的主前作动筒疲劳寿命试验达到预期的循环次数时,均没有出现断裂或者损坏。结论喷丸强化处理能有明显提高作动筒的抗疲劳和抗应力腐蚀性,强化处理后的零件疲劳寿命能够超过处理前的2倍,可以采用喷丸强化技术延长作动筒的使用寿命。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.