喷丸强化技术在某型作动筒延寿修理中的应用

目的将某型作动筒的寿命由6000±150起落延长至12 000±150起落。方法采用喷丸强化技术对作动筒的主要承力零件进行喷丸强化处理,提高零件的抗疲劳和抗应力腐蚀性能。通过疲劳寿命试验验证对比喷丸强化处理前后典型零件和作动筒的寿命指标是否达到了预期目标。结果喷丸强化处理前的3件前耳环螺栓试验循环次数均未超过1.8×10~6即断裂,喷丸强化后达到3.6×10~6时仍未断裂。喷丸强化处理后的4件主耳环螺栓与喷丸强化处理前对比,断裂时的试验循环次数均有不同程度的提高,均值寿命比值大于2.36。喷丸强化处理前后的主前作动筒疲劳寿命试验达到预期的循环次数时,均没有出现断裂或者损坏。结论喷丸强化处理能有明显提高作动筒的抗疲劳和抗应力腐蚀性,强化处理后的零件疲劳寿命能够超过处理前的2倍,可以采用喷丸强化技术延长作动筒的使用寿命。     

常温酸性腐蚀对热障涂层性能的影响

采用酸性盐雾腐蚀试验对物理气相沉积法制备的热障涂层进行了常温腐蚀,研究了常温酸性盐雾腐蚀对热障涂层的微观形貌以及高温性能的影响.试验结果表明：常温酸性腐蚀使热障涂层表面变得粗糙不平,产生了较大的裂纹.经过150次高温循环氧化后,顶层氧化锆晶粒排列疏松,裂纹进一步扩展,中间层--粘结层氧化速度加快,生成了疏松的TGO层.TGO的体积膨胀效应使得陶瓷/粘结层界面结合力降低,缩短了涂层的使用寿命.     

冲模寿命与模具维修

针对我国模具寿命偏低现象 ,提出了通过规范冷冲模刃磨、修理行为 ,既可提高冷冲模寿命 ,又可大幅降低产品成本     

压力传感器位移分析及疲劳寿命预测

完成了依据有限元疲劳分析为基础的传感器寿命预测研究工作。阐述压力传感器工作原理,定义影响系统寿命的参数组,既包含力学环境参数,亦包括材料属性、几何形式等结构参数。针对不同参数属性,依据疲劳强度计算需求,构建有限元数值计算模型;根据影响传感器寿命的传感单元单晶硅S-N(应力-循环)分布,完成变载荷输入条件下模型疲劳分析,依据数值计算结果完成该压力传感器寿命预测工作。结果表明:压力传感器使用寿命在7.068E8次数以上。本课题研究提出的新方法,摆脱了传统依靠试验完成多种材料组成结构体的疲劳分析及寿命预测窘境,具有通用性。     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

基于重要性分析的甲烷/乙烯混合燃烧框架机理构筑

建立了基于重要性分析的详细化学机理分析平台,利用耦合组分化学存活时间和敏感性系数的重要性参数,确定详细机理中的准稳态组分,通过移除这些组分及其相关反应,得到了计算精度较高的框架机理。针对目前燃烧学界较为关注的混合燃烧问题,以甲烷、乙烯这两种典型低碳碳氢燃料为研究对象,对其详细化学反应机理进行了分析,利用重要性分析法构筑框架机理,并对甲烷/空气和甲烷/乙烯/空气预混火焰进行了数值计算。与详细机理相比,框架机理所涉及的组分数与基元反应数都得到了大幅度的降低,计算时间明显减少,但对火焰温度及反应物、生成物、中间组分浓度的预测与采用详细机理得到的结果吻合良好,证明了重要性分析法的有效性与可靠性。     

HCFCs和HFCs对流层寿命的预测

利用Ｃ－Ｈ键的Ｍｕｌｌｉｋｏｎ键重叠布局数，对甲烷的不完全氟氯取代物的对流层寿命用公式作了计算。对传统的人工神经网络法－反向传递算法作了改进。在电荷这一量化参数基础上，用ＡＮＮ法对一碳和二碳的ＨＣＦＣｓ和ＨＦＣｓ的对流层寿命作了预测。     

Carbonyls in the metropolitan area of Mexico City: calculation of the total photolytic rate constants Kp(s(-1)) and photolytic lifetime (tau) of ambient formaldehyde and acetaldehyde

A great number of studies on the ambient levels of formaldehyde and other carbonyls in the urban rural and maritime atmospheres have been published because of their chemical and toxicological characteristics, and adverse health effects. Due to their toxicological effects, it was considered necessary to measure these compounds at different sites in the metropolitan area of Mexico City, and to calculate the total rate of photolytic constants and the photolytic lifetime of formaldehyde and acetaldehyde. Four sites were chosen. Sampling was carried out at different seasons and atmospheric conditions. The results indicated that formaldehyde was the most abundant carbonyl, followed by acetone and acetaldehyde. Data sets obtained from the 4 sites were chosen to calculate the total rate of photolysis and the photolytic lifetime for formaldehyde and acetaldehyde. Maximum photolytic rate values were obtained at the maximum actinic fluxes, as was to be expected.     

Kinetic and mechanism studies of the ozonolysis of three unsaturated ketones

Reaction rate constants and products of 1-octen-3-one, 3-octen-2-one and 4-hexen-3-one with ozone were studied in a 100-L fluorinated ethylene propylene (FEP) Teflon film bag using absolute rate method at 298 ± 1 K and atmospheric pressure. The rate constants were (1.09 ± 0.12) × 10^?17, (3.48 ± 0.36) × 10^?17 and (5.70 ± 0.60) × 10^?17 cm³/(molecule?sec), respectively. According to the obtained rate constants, the effects of carbonyl were discussed. The carbonyl group in β position has a net withdrawing effect with respect to an olefinic bond, then causing the decline of rate constants. The quantum chemical calculation was used to explain the results of rate constants. The products of ozonolysis were mainly aldehydes, which have significant influence on the formation of SOA, and hence play an important role in the atmosphere. In this work, we detected the main products of reaction and proposed the reaction mechanism by combining the results of quantum chemical calculations. Atmospheric lifetime for three unsaturated ketones reacted with ozone was 36.4, 11.4 and 6.9 hr for 1-octen-3-one, 3-octen-2-one and 4-hexen-3-one, respectively.     

An Analysis of Young Driver Crash Types and the Associated Lifetime Care Cost in Victoria,Australia

Objective: The elevated crash involvement rate of young drivers is well documented. Given the higher crash risk of young drivers and the need for innovative policy and programs, it remains important to fully understand the type of crashes young drivers are involved in, and knowledge of the lifetime care cost of crashes can support effective policy development. The aim of this article is to document the number and type of young driver crashes, as well as the associated lifetime care cost over a 9-year period (2005–2013) in Victoria, Australia.

Methods: In Victoria, Australia, the Transport Accident Commission (TAC) has legislated responsibility for road safety and the care of persons injured in road crashes, irrespective of fault. TAC claims data for the period 2005–2013 were used to document the number and type of young driver crashes. Lifetime care costs (past and future payment liabilities) were calculated by Taylor Fry actuarial consultancy. License and population data were used to define the crash involvement rate of young drivers.

Results: Over the 9-year period, 16,817 claims were lodged to the TAC by drivers 18–25 years of age following a crash. There were 646 fewer drivers aged 18–25 killed and injured in 2013, compared to 2005, representing an unadjusted change of ?28.7% (?29.8% males; ?28.4% females). The total lifetime care cost of young drivers killed and injured in Victoria for the period 2005–2013 was estimated to be AU$634 million (US$493 million). Differences between males and females, single- and multivehicle crashes, and fatalities and injuries were found to be statistically significant. Run-off-road crashes and crashes from opposing direction were overrepresented in the lifetime care costs for young driver claimants. Twenty-eight injured drivers were classified as high-severity claims. These 28 claimants require additional long-term care, which was estimated to be AU$219 million; of these 28, 24 were male (85.7%). The long-term care costs for these 28 drivers (0.16%) accounts for 34.5% of the total lifetime care cost of all 18- to 25-year-old injured drivers.

Conclusions: By using no-fault lifetime care costs that account for medical and like expenses, rehabilitation, and social reintegration costs, a more accurate understanding of the cost of young driver crashes can be determined. Application of these costs to specific crash types highlights new priorities and opportunities for developing programs to reduce young driver crashes.