Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

中国主要电子废物产生量估算

在分析了电子废物类型及其可能造成的主要环境问题的基础上。根据电子电器产品的销量、社会保有量以及产品寿命期等因子建立模型对我国2000-2010年间的电脑、电视机、冰箱、洗衣机、空调等5大类电子电器产品的年度废弃量进行估算。结果显示到2003年电脑年度废弃量达到447万台，总体呈增长趋势；电视机、冰箱的废弃量在2003年分别达到4229万台和976万台；洗衣机年度废弃量有一定波动。大约在2005年达到一个高峰，废弃量为1521万台；空调废弃量相对于其他家电较少，但一直处于稳步增长期。并在此基础估算了我国2003年主要电子废物中的可回收资源含量。量大而且增长较快的电子废物的处置和资源再生化将是我国电子废物管理面临的一个难题。     

空空导弹定延寿技术应用研究

介绍了国外典型的定延寿方法,以美国为代表采用的跟踪监测法和以俄罗斯为代表采用的加速试验法,之后概述了国内常用的厂内寿命试验法、领先使用法、外场信息法、工程分析法、加速试验法。在此基础上,总结了适用于国内空空导弹开展定延寿工作的方法,最后对深入开展空空导弹定延寿技术研究提出了几点建议。     

密封组合形式对结构密封性能影响研究

目的研究密封组合形式对结构密封性能的影响。方法开展密封性能试验,从密封形式、装配形式和涂覆形式的3种组合形式开展试验研究,找出结构密封性能影响因素,筛选密封最优组合形式。结果结构密封3种组成形式分别为有无贴合面的密封形式,干涉装配、湿装配形式,部分涂覆、全涂覆形式。开展2种应力水平下8种密封组合形式的密封性能试验,在保证密封工艺质量条件下,按照飞机结构和受载特点选取合理密封组合形式能有效提高结构密封性能。结论在飞机应力较高、不常拆的密封部位应选择贴合面密封、干涉装配、部分涂覆的密封组合形式,在飞机结构设计要求间隙装配、常拆卸的密封部位选择贴合面密封、湿装配、部分涂覆的密封组合形式。     

A Variance Estimator for Constrained Estimates of Change in Relative Categorical Frequencies

Consistent estimators of change and state becomes an issue when sample data come from a mix of permanent and temporary observation units. A joint maximum likelihood estimator of state and change creates estimates of state that depend on antecedent viz. posterior survey results and may differ from estimates of state derived from a single-date analysis of the sample data. A constrained estimator of change in relative categorical frequencies that eliminates this potential inconsistency is proposed and a model based estimator of their sampling variance is developed. The performance of the constrained estimator is quantified against six criteria and a joint maximum likelihood estimator in simulated sampling from 15 populations with three combinations of permanent and temporary samples, four to six categorical class attributes, and constant size between sampling dates. Bias of the constrained estimators was negligible but larger than for joint maximum likelihood estimators. Mean absolute deviations and variances of constrained estimators were generally at par with the joint estimators. Constrained estimators of root mean square errors and achieved coverage of nominal confidence intervals of constrained estimators were occasionally better. A generalized variance function for the constrained estimates of change is provided as a computational shortcut.     

无顺市水污染物总量分配探讨

根据抚顺市地表水系和水域功能区划的分布情况，采用了定额达标分配、治理费用最小，及按现有排污总量进行达标分配的方法对水污染物进行总量分配，从而对减少污染物排放，控制水体污染提供了技术支持。     

我国SO_2和NO_X排放强度地理分布和历史趋势

根据我国燃料消费、燃料的含硫量和硫与氮氧化物排放因子，计算我国各地区ＳＯ_２和ＮＯ_Ｘ排放强度地理分布。结果指出，我国原煤含硫量为１．１２％。１９９０年全国ＳＯ_２和ＮＯ_Ｘ的排放量分别为１７５１．８万ｔ和８４２．２万ｔ，排放强度最大的地区是中东部地区，即辽宁、河北、山东、山西和浙江。这些地区平均排放强度大于７ｔ／ｋｍ￣２·ａ。还估算了全国１９５０～１９９０年ＳＯ_２和ＮＯ_Ｘ历年的排放量。     

New process for anaerobic treatment of Vitamin C wastewater in a full scale plant

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅＦｉｒｓｔＰｈａｒｍａｃｅｕｔｉｃａｌＦａｃｔｏｒｙｉｎＳｈｉｊｉａｚｈｕａｎｇＣｉｔｙ，Ｃｈｉｎａ，ｂｕｉｌｔａｓｅｔｏｆｅｑｕｉｐｍｅｎｔｏｆｆｕｌｓｃａｌｅｔｒｅａｔｉｎｇＶｉｔａｍｉｎＣｗａｓｔｅｗａｔｅｒｉｎ...     

钢绞线逐根张拉下锚墩基床沉陷所致锚索预应力损失问题

在预应力锚索锚墩下部地基岩土的基床系数较低情况下,采用钢绞线逐根张拉来施加预应力会导致较大的预应力损失以及各钢绞线较显著的预应力不均。基于锚墩基床岩土体的弹性压缩模型,理论探讨了钢绞线逐根对称循环张拉下的锚索预应力损失,及钢绞线的预应力均匀性问题。分析表明,基床系数越低,逐根张拉下的锚索预应力损失越大,且其所含各钢绞线预应力的均匀性越差;而同样荷载和基床系数下,锚索所含钢绞线根数越多, 逐根张拉后的预应力损失和不均匀性也越大。但采用分级循环张拉、正序张拉及调整、锚墩下部一定扩散角填石等工序及措施有助于减轻预应力损失和解决不均匀性问题。     

平板载荷试验在深圳某工程中确定地基承载力

平板栽荷试验(PLT)是在一定面积的承压板上向地基土逐级加荷载,测求地基土的压力与变形特征的原位测试方法。文章在深圳地区岩土勘察中进行了一次平板栽荷试验,较为准确地确定了地基土的承载力和变形模量。结合工程实例,详细介绍了PLT的施工原理和方法,以期对类似场地勘察工程实施有一定的参考意义。