复合氧化物汽车尾气净化催化剂抗SO2中毒机理研究

复合氧化物催化剂(ASC)具有较高的活性和良好的抗SO_2中毒性能.用IR、XPS、TPD等技术研究了该催化剂抗SO_2中毒机理,结果表明,与易失活催化剂相比,ASC经500h反应(反应气含SO_2约20ppm),其活性组分价态无显著变化,仅表面发生SO_2的化学吸附,经与约500ppm的SO_2作用20h后,发现仅有少量SO_4~(2-)形成.这是由于在ASC催化剂中添加了特殊助剂,而使催化剂活性组分得到保护的缘故.     

Greenhouse impacts of anthropogenic CH4 and N2O emissions in Finland

The Finnish anthropogenic CH₄ emissions in 1990 are estimated to be about 250 Gg, with an uncertainty range extending from 160 to 440 Gg. The most important sources are landfills and animal husbandry. The N₂O emissions, which come mainly from agriculture and the nitric acid industry are about 20 Gg in 1990 (uncertainty range 10–30 Gg). The development of the emissions to the year 2010 is reviewed in two scenarios: the base and the reduction scenarios.According to the base scenario, the Finnish CH₄ emissions will decrease in the near future. Emissions from landfills, energy production, and transportation will decrease because of already decided and partly realized volume and technical changes in these sectors. The average reduction potential of 50%, as assumed in the reduction scenario, is considered achievable.N₂O emissions, on the other hand, are expected to increase as emissions from energy production and transportation will grow due to an increasing use of fluidized bed boilers and catalytic converters in cars. The average reduction potential of 50%, as assumed in the reduction scenario, is optimistic.Anthropogenic CH₄ and N₂O emissions presently cause about 30% of the direct radiative forcing due to Finnish anthropogenic greenhouse gas emissions. This share would be even larger if the indirect impacts of CH₄ were included. The contribution of CH₄ can be controlled due to its relatively short atmospheric lifetime and due to the existing emission reduction potential. Nitrous oxide has a long atmospheric lifetime and its emission control possiblities are limited consequently, the greenhouse impact of N₂O seems to be increasing even if the emissions were limited somehow.     

不同温湿度条件下微米硼的氧化过程研究

目的 探究不同温湿度条件下微米硼的氧化层结构特征。方法 利用高温水浴浸泡处理去除原料微米硼的表面氧化层,然后在恒温恒湿条件下对微米硼进行加速氧化,利用扫描电子显微镜、透射电子显微镜和X射线光电子能谱对加速氧化后硼颗粒的氧化层厚度及组成进行分析,总结表面氧化层结构及成分组成变化规律,揭示温湿度条件下微米硼的氧化机制。结果 微米硼经高温水浴浸泡处理后,表面氧化层去除率达到50%。随着加速氧化时间的延长,硼颗粒氧化层的厚度逐渐增大,由内向外硼颗粒表面可以用B-BxOy-B2O3三层结构来表示,BxOy总是伴随着B2O3同时出现的,且随着氧化反应的进行,颗粒表面BxOy的含量将超过B的含量。结论 不同温湿度条件下微米硼的氧化机制为O2向B颗粒内部单向扩散的反应机制,B先与O2反应,形成低氧化物BxOy,BxOy进而与O2反应生成B2O3。随着氧化层厚度的增加,O2向B颗粒内部扩散的阻力增大,氧化反应速率随之降低。相比湿度的影响,温度的升高可显著加快硼表面氧化层的形成;温度一定时,湿度的增加可促进硼氧化层的形成。     

天津市滨海河流N2O扩散通量及控制因子

河流是大气温室气体重要的排放源.为了探讨天津市典型景观滨海河流N₂O释放空间特征及影响因素,以天津市6条不同土地利用类型的滨海河流为研究对象,通过顶空-气相色谱法测定了N₂O浓度、饱和度和扩散通量.结果表明,天津市不同景观河流N₂O浓度都处于过饱和状态,表现为大气N₂O的源;N₂O浓度、饱和度和扩散通量均值为（23.85±15.20）nmol·L^-1、（309.71±197.38）%和（27.04±16.46）μmol·（m²·d）^-1,范围分别为12.70～115.69 nmol·L^-1、 164%～1 502%和9.17～244.79μmol·（m²·d）^-1.天津市不同土地利用类型河流N₂O浓度和扩散通量具有较大的空间异质性,表现为：排污河>城市河流>郊区河流>农业河流.天津滨海河流N₂     

电化学微传感器检测水中痕量铜离子

为改善微电极在阳极溶出伏安法检测重金属离子过程中低电流响应和低电催化能力的缺点,提出了一种在碳纤维微电极表面合成还原氧化石墨烯/纳米金材料制得还原氧化石墨烯纳米金修饰碳纤维微电极（rGO/AuNPs CFMEs）的方法.通过SEM表征,所制备的rGO/AuNPs CFMEs具有比表面积高、吸附能力强和催化活性好的特点,因此改性微电极适合作为方波阳极溶出伏安法（SWASV）测定水中铜离子（Cu²⁺）的工作电极.在构建微传感器测试水中痕量铜离子系统后,对pH值、电导率、富集时间和富集电位等检测条件进行了优化.在pH值为4,电导率为36.1S/m,富集时间为360s,富集电位为-1.2V的最佳条件下,铜的线性范围和检出限分别0~1.0μmol/L和2.4nmol/L.此外,微传感器的可重复性、长期稳定性以及选择性也得到了验证.     

IL/GO/88A的制备及其对四环素的光催化降解性能

使用离子液体(ILs)辅助生长新型光催化材料IL/GO/88A用于降解四环素(TC),使用XRD、FTIR、SEM、N₂吸附-脱附、UV-vis、EIS等方法分别对催化材料进行了表征分析,考察了催化剂投加量、pH、TC浓度对TC降解的影响。该复合材料表现出高效的TC降解效率。在催化剂投加量为0.30 g·L⁻¹、pH为5.7、TC溶度为10 mg·L⁻¹的条件下,光照180 min后,IL/GO/88A对TC的去除率达到95.7%。催化剂在重复利用3次后仍能保持稳定的性能。此外,阐明了吸附-光催化协同机理,并推断·OH、h⁺是主要的活性物种。本研究结果对开发高效MOFs光催化复合材料并用于处理含四环素废水提供了新思路。     

氧化镁基生物质炭高效去除水体中磷的特性

利用花生壳为前驱体,在高温限氧条件下,将氧化镁(MgO)负载于生物质炭(BC)表面制备出氧化镁基生物质炭(MgOBC)复合材料.系统研究了MgO-BC对水体中P的吸附特性,并探讨了溶液pH值、接触时间、竞争离子等因素对P的吸附效果的影响.结果表明,P的最佳吸附初始pH为7~9,过酸过碱的环境均不利于P的吸附;P的吸附过程可在540 min内达到平衡,且动力学曲线较好地符合伪一级和伪二级动力学模型,拟合系数可达97.3%和99.0%;当Cl~-、HCO_3~-、NO_3~-等共存离子的量浓度达到P的10倍时,MgO-BC对P仍具有较强的吸附能力;P的吸附过程较好地符合Langmuir等温模型,拟合系数达99%,理论最大吸附容量为138.07 mg·g~(-1),远高于其它未经改性或改性的生物质炭和几种典型P吸附剂的吸附容量.此外,吸附P后的复合材料可作为肥料施入土壤,可有效实现P的再利用.综上所述,该MgO-BC复合材料在净化实际P污染水体中有着广阔的应用前景.     

Effects of long-term amendment of organic manure and nitrogen fertilizer on nitrous oxide emission in a sandy loam soil

To understand the effects of long-term amendment of organic manure and N fertilizer on N2O emission in the North China Plain, a laboratory incubation at different temperatures and soil moistures were carried out using soils treated with organic manure （OM）, half organic manure plus half fertilizer N （HOM）, fertilizer NPK （NPK）, fertilizer NP （NP）, fertilizer NK （NK）, fertilizer PK （NK） and control （CK） since 1989. Cumulative N2O emission in OM soil during the 17 d incubation period was slightly higher than in NPK soil under optimum nitrification conditions （25℃ and 60% water-filled pore space, WFPS）, but more than twice under the optimum denitrification conditions （35℃ and 90% WFPS）. N2O produced by denitrification was 2.1-2.3 times greater than that by nitrification in OM and HOM soils, but only 1.5 times greater in NPK and NP soils. These results implied that the long-term amendment of organic manure could significantly increase the N2O emission via denitrification in OM soil as compared to NPK soil. This is quite different from field measurement between OM soil and NPK soil. Substantial inhibition of the formation of anaerobic environment for denitrification in field might result in no marked difference in N2O emission between OM and NPK soils. This is due in part to more rapid oxygen diffusion in coarse textured soils than consumption by aerobic microbes until WFPS was 75% and to low easily decomposed organic C of organic manure. This finding suggested that addition of organic manure in the tested sandy loam might be a good management option since it seldom caused a burst of N2O emission but sequestered atmospheric C and maintained efficiently applied N in soil.     

模拟阳光下Ag／I-TiO2光催化预处理山核桃加工废水

研究了在模拟太阳光下,采用银修饰的碘掺杂二氧化钛光催化剂（Ag／I—TiO2）对某食品厂山核桃加工废水进行光催化预处理的效果。结合x射线衍射（XRD）、比表面积分析（BET）、紫外-可见漫反射光谱（uV—Vis）的表征结果,来分析催化剂结构对于废水处理效果的影响。探讨了Ag含量、废水初始pH（pHi）和光照时间等因素对化学需氧量（COD）去除及水质可生化性（B／C）提高的影响。并得出适宜的反应参数为：3％Ag含量;pHi为6;光照时间为240min。在最佳条件下,COD去除率45％,废水B／C比由0．17上升到0．31。光催化氧化法能够有效降低山核桃加工废水的COD含量,并达到显著提高废水可生化性的目的。     

Formation of PCDD/Fs from oxidation of 2-monochlorophenol over an Fe2O3/silica surface

The role of iron in surface-mediated formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from 2-chlorophenol (2-MCP) was investigated over the temperature range of 200-550 °C under oxidative conditions. In order to compare and contrast with previous work on copper and ferric oxide-mediated pyrolysis of 2-MCP, identical reaction conditions were maintained (50 ppm 2-MCP, model fly-ash particles containing 5% Fe₂O₃ on silica). Observed products included dibenzo-p-dioxin (DD), 1-monochlorodibenzo-p-dioxin (1-MCDD), dibenzofuran (DF), 4,6-dichlorodibenzofuran (4,6-DCDF), 2,4- and 2,6-dichlorophenol, 2,4,6-trichlorophenol, quinone, catechol, chloro-o-quinone, chlorocatechol and polychlorinated benzenes. Yields of DD and 1-MCDD were 2 and 5 times higher than under pyolysis conditions, respectively. Although 4,6-DCDF was the major PCDD/F product formed with a yield that was 2.5× greater than under pyrolysis, the yield of non-chlorinated DF, which was the dominant PCDD/F product under pyrolysis, decreased by a factor of 3. Furthermore, the ∼2× higher yield of PCDDs under oxidative conditions resulted in a PCDD to PCDF ratio of 0.75 compared to a relatively low ratio of 0.39 previously observed under pyrolytic conditions.