锦纶生产废水的深度处理研究

采用曝气生物滤池对锦纶生产废水进行深度处理,试验结果表明,该工艺可有效去除CODCr和NH3-N,并在不同运行条件下的运行特性进行了考察,确定试验的最佳气水比。     

全自动自适应四边形有限元网格生成/再生成方法与软件AUTOMESH-2D/PC

独立提出并研究开发了一种密度控制和区域分解相结合的四边形网格自动生成方法 ,简称区域分解法。以区域分解法为基础 ,自主开发了商品化网格自动生成 /再生成软件AU TOMESH ,并已经在中国版权保护中心进行了软件著作权登记。介绍区域分解法和软件AU TOMESH ,并给出多个划分实例     

偏电压对Ti/TiO2光电催化氧化富里酸的影响

采用光电催化反应器对水中天然有机物富里酸(FA)进行降解试验,考察了外加阳极偏电压对光电催化反应器降解富里酸的影响.结果表明,当外加电压为1.2V时,具有最佳的UV254和有机碳TOC去除率,当反应时间为2h时,富里酸的UV254和总有机碳TOC的去除率分别为77.4%和45.4%.另外,在反应初期(前1h内)富里酸光电催化反应动力学常数主要受外加偏电压的影响.     

金属丝网对甲烷/空气预混火焰管道内传播的影响

为研究管道内金属丝网对甲烷/空气预混火焰传播的影响,通过实验和三维数值模拟研究安装金属丝网的管道内火焰传播特性以及流场、温度场的变化。结果表明:40目4层的金属丝网可以使火焰淬熄,30目4层的金属丝网无法淬熄,但可以使火焰停滞3 ms;大涡模型可以很好地对管道内火焰淬熄现象进行模拟;当火焰穿过30目4层金属丝网时,速度增大,在Kelvin Helmholtz不稳定和Rayleigh Taylor不稳定的耦合作用下形成湍流;金属丝网的目数会影响热量在丝网层中的扩散,当金属丝网为30目4层时,火焰热量扩散快,而当金属丝网为40目4层时,火焰热量扩散慢且温度大幅度衰减,衰减率达到83%。     

Large eddy simulation and experimental study of the effect of wire mesh on flame behaviours of methane/air explosions in a semi-confined pipe

Preventing the propagation of flames in a pipeline is an effective measure for avoiding gas explosion accidents and reducing losses. To evaluate the effect of wire mesh, acting as a porous media, experimental and simulation studies are conducted to determine the influence of the wire mesh on the dynamics of premixed methane/air flame propagation in a semi-closed pipe. Four different kinds of wire mesh with different numbers of layers are chosen in the experiments and simulation, and the mechanism of wire mesh quenching of the flame is investigated. The experimental and simulation results are consistent. Flames are quenched when 4 layers of 40-mesh or 3 layers of 60-mesh wire mesh are used; however, once the flame propagates through the wire mesh, the risk of methane combustion may increase. The wire mesh becomes the key factor causing flame folds and acceleration, and the greater the number of layers or the larger the mesh size is, the more obvious the folds after the flame passes through the wire mesh. Moreover, the combination of heat absorption and disruption of the continuous flame surface by the mesh causes flame quenching. Wire mesh can effectively attenuate the flame temperature during premixed flame propagation in a pipe, and the attenuated maximum rate reaches approximately 79% in the case of adding 3 layers of 60-mesh wire mesh.     

河谷型城市风场及污染物扩散的CFD数值仿真

为研究河谷型城市地形及其引起的风场和污染物扩散的复杂问题,利用CFD（计算流体力学）方法和复杂地形网格生成技术,建立河谷型城市风场及大气污染分布的数值仿真模型,实现CFD方法在复杂地形空气运动和污染物扩散方面的应用.分别使用LES（large eddy simulation）模型和mixture模型研究兰州市地面风场特征和污染物扩散形态,计算得到的污染物分布结果与实测结果分布一致.结果表明:复杂地形对空气运动的影响很大,如风速因山体屏障作用会呈现带状分布特征,山体后侧易出现弱风区域;同时,风场会密切影响污染物扩散,决定了污染物扩散形态,如幅散能够影响污染物扩散范围及污染水平.而给定西北风条件下,如地面以上10 m、风速为5 m/s、不受地形阻挡情况下,工业区污染物浓度被稀释10倍,约扩散2.2 km;山体阻挡会抑制污染物纵向扩散,表现在山体阻挡情况下污染物稀释100倍时的扩散长度约为相对平坦区域的1/3.此外,不同的入口风向会引起空气运动与山体相互作用发生变化,进而会使得地面风速、局部风场存在差异,造成污染物扩散及分布形态差异.研究显示,CFD方法可行,模型可靠,可以用来研究地形对风场和污染物扩散的影响.      

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

象山港国华电厂强增温海域浮游动物群落结构和多样性的时空特征

为探明电厂强增温海域浮游动物群落结构和多样性的时空特征,于2011年在象山港国华电厂附近海域,采用浮游生物Ⅱ型网(网目160μm)进行10站位2重复的浮游动物季节性采样.结果表明,共识别出62种浮游动物(含幼体),平均丰度为9 531.1 ind.m-3.该海域浮游动物群落主要由桡足类和浮游幼体类组成,且以浮游幼体类为主,比例高达66.6%.相似性分析显示,各月间浮游动物群落结构差异极显著(P<0.01),控制群落结构的优势种有18种,最重要的判别种有瘦尾胸刺水蚤Centropages tenuiremis、大同长腹剑水蚤Oithona similis、伪长腹剑水蚤Oithona fallax、克氏纺锤水蚤Acartia clausi、长尾基齿哲水蚤Clausocalanus furcatus、针刺拟哲水蚤Paracalanus aculeatus和小拟哲水蚤Paracalanus parvus.GLM分析显示,月份间的多样性指数也存在极显著差异(P<0.01),经计算,各多样性指数随水温增加而下降的拐点水温范围为20.31～22.31℃.在断面上,离排水口0.2 km断面(D02)的平均水温比2 km断面高2.16℃.受温度影响,主要优势种如瘦尾胸刺水蚤和大同长腹剑水蚤倾向于向D02断面移动,克氏纺锤水蚤、尤其是大型浮游动物倾向于远离排水口,并向1.2 km断面聚集,使D02断面的种类数最少(33种)、丰度最低(5 522.8 ind.m-3),而1.2 km断面的种类数(53种)和丰度(16 491.0 ind.m-3)最高;同时,D02断面的多样性指数也明显低于其它断面.经线性回归分析,海域增温使多样性指数极显著下降(P<0.01),每增温1℃浮游动物丰富度下降12.3%.     

亚超临界水技术在废旧尼龙6解聚中的应用

研究了尼龙6在亚超临界水中的解聚反应,以期为废旧尼龙6的回收利用提供技术参数.实验分别利用气质联用仪和紫外分光光度计对解聚后的液相产物进行定性和定量分析,并考察了不同的反应温度、反应压力和反应时间对液相产物收率的影响.结果表明,液相产物绝大部分为己内酰胺;解聚的最佳条件为370 ℃、25 MPa、60 min;己内酰胺最大收率为96%.通过动力学分析和Arrhenius关系计算,得出尼龙6亚超临界水解聚的活化能为64.4 kJ/mol.     

土工格栅拉拔试验模型优化及加筋特性研究

目前土工格栅加筋提高工程的安全性广受关注,为研究土工格栅摩擦系数、网孔尺寸对其加筋特性的影响,采用PFC3D建立土工格栅拉伸试验模型和拉拔试验模型,并对2种试验模型进行优化。将土工格栅拉伸应力-应变关系按其应变量分段,开发了记录试验过程中土工格栅的应变并根据该应变与分段界限应变间大小关系来改变格栅的法向、切向黏结刚度的FISH程序。在保持土工格栅试样尺寸及各参数不变的条件下,分别开展不同格栅摩擦系数和不同网孔尺寸的数值拉拔试验。结果表明:按土工格栅应变量对其拉伸特性进行分阶段模拟的方法可使模拟结果更加准确;优化后的土工格栅拉拔试验模型计算结果与室内试验结果更加吻合;土工格栅的摩擦系数及网孔尺寸对加筋特性的影响明显,孔径比为5. 0左右时的加筋效果最佳。建议在选用加筋材料时应考虑土工格栅摩擦系数和网孔尺寸与填料粒径之间的匹配关系。