Monitoring of Butter and Ghee (Clarified Butter Fat) for Pesticidal Contamination from Cotton Belt of Haryana, India

Butter (45) and ghee (55) samples were collected from rural and urban areas of cotton growing belt of Haryana and analysed for detecting the residues of organochlorine, synthetic pyrethroid and organophosphate insecticides. The estimation was carried out by using multi residue analytical technique employing GC-ECD and GC-NPD systems equipped with capillary columns. Butter samples were comparatively more contaminated (97%) than ghee (94%), showing more contamination with organochlorine insecticides from urban samples. About 11% samples of butter showed endosulfan residues above MRL value and 2% samples had residues of synthetic pyrethroids and organophosphates each above their respective MRL values. In ghee, residues of HCH & DDT both and of endosulfan exceeded the MRL values in 5 and 20% samples, respectively. Among organophosphates, only chlorpyriphos was detected with 9% samples showing its residue above MRL value. Irrespective of contamination levels, residues above the MRL values were more in ghee. More extensive study covering other agricultural regions/zones of Haryana has been suggested to know the overall scenario of contamination of milk products.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

对大气采样误差的理论研究

环境监测数据是环境保护工作的基础,监测仪器设备的精良及监测方法的科学性则是获得优质数据的保障工具.本文运用数学方法对目前广泛使用的采样仪器进行了采样误差的分析研究,指出了改善仪器和改善监测方法去获取更精确数据的途径.     

催化快速法测定COD_(Cr)定量下限的研究

催化快速法测定CODCr是我国目前环境监测中普遍使用的最快速、简便、可靠的方法 ,该法的检测范围是 60～ 1 0 0 0mg/l,我们经过研究测出催化快速法的定量下限为 1 0mg/l,扩大了该法的应用范围。     

废旧塑料回收利用技术

从我国废塑料回收利用的现状出发 ,分析了今后我国废塑料回收利用技术的发展趋势和应采取的措施 ,指出了废塑料回收利用的重要性。     

变速器壳体低周疲劳优化设计

目的 分析变速器壳体驻车耐久试验的失效根本原因,对变速器壳体进行低周疲劳优化设计.方法 首先排查壳体的化学成分、铸造质量,排除材料和工艺引起失效问题的可能性,然后通过有限元方法分析驻车轴孔的最大拉应变、驻车工况壳体变形、轴孔接触区域.根据局部应变分布特征,提出驻车轴修形的优化方案,并且根据壳体材料的低周疲劳参数,确定Coffin-Manson模型,并根据该模型预测壳体驻车轴孔优化前后的疲劳寿命.结果 驻车轴孔的最大拉应变高达0.95％,确定应变过大是导致壳体失效的根本原因.驻车轴度修形的优化方案将最大拉应变降低到0.40％,塑性应变占比由42％降低到5％,疲劳寿命的预测值由原来的175次提高到7980次,满足试验循环次数1000次的要求,最终优化物理样机通过了驻车耐久试验验证.结论 使用的Coffin-Manson模型参数能准确地预测变速器壳体的低周疲劳寿命,驻车轴小角度修形优化方案能够有效解决局部应变过大的失效问题,具有一定的工程参考意义.     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

塑料薄膜用无滴消雾剂的研制

本文介绍了塑料薄膜用无滴消雾剂的配方、制备方法和使用情况。     

含硫污水系统耐蚀材料的筛选与应用

针对西北地区一综合炼油厂含硫污水管线的严重腐蚀问题，分析了腐蚀原因，确立了材料筛选方案，通过实验室静态挂片试验绘制了重量损失率变化曲线和现场挂片等试验手段，筛选推荐出了树脂玻璃钢耐蚀材料。工业生产应用结果表明，MFE-2型树脂玻璃钢是适用于该厂含硫污水系统的耐蚀材料，为类似装置的长周期运行提供了借鉴和经验。     

中国废旧农用塑料薄膜的回收与利用

介绍了中国废旧农用塑料薄膜回收利用的现状 ;重点阐述了中国废旧农膜再生造粒技术 ,从工艺、成本利益、再生粒料的应用市场等各方面对该技术进行了详细的介绍和剖析 ,在论述其优越性的同时 ,指出了再生造粒技术存在的问题 ,为研究人员今后的研究工作指明了方向 ;最后对废旧农膜再生造粒技术的应用前景进行了展望。