资源型城市可持续发展能力的演变与调控

作为特殊的经济区，资源型城市的衰落与振兴日益成为社会关注的热点。本文从分析资源型城市可持续发展能力入手，论述了资源型城市发展能力的成长阶段及演变特征，提出了资源城市可持续发展能力调控的模式和途径。     

村级水资源的管理与利用研究--来自南方四个村的案例分析

农村水资源及其相关设施的改革需要更多了解村和户层次上的现实状况和机制安排。以避免改革扭曲和失败。通过对湖北和广西共四个村的村委会、关键知情人及120个农户的调查。在村和农户两个层次上描述水资源及其相关设施的管理与利用，尤其是在干旱年份村和户所采取的策略。并深入分析了农村村级水资源管理与利用的制度安排与问题。得出的结论是。追求水利管理效率的市场化改革需要考虑干旱的威胁，要有基于风险的制度设计和法律保障。     

离子液体吸收废印刷线路板热拆解过程中挥发性有机物——基于COSMO-RS模型

模拟废印刷线路板（WPCB）的热拆解过程,分析热拆解过程中的挥发性有机物（VOCs）组分;利用真实溶剂似导体屏蔽（COSMO-RS）模型对浓度较高的污染物进行量子力学模拟,研究离子液体（ILs）组成单元对目标污染物溶解度的影响差异,分析溶解过程中主导分子间作用力类型,确定优选吸收剂;测定不同溶剂进行溶解性,验证模型适用性.结果表明：①乙酸乙酯和环戊酮是浓度较高的VOCs组分,在240和250℃时浓度分别为43.1,153mg/m³和105,252mg/m³,质量百分比总和分别为76.3%和67.3%.②高表面屏蔽电荷密度分布峰、长烷基链阴阳离子和亲电基团的存在可提高乙酸乙酯和环戊酮在ILs中的溶解度.双三氟甲磺酰基亚胺盐（NTf₂^-）类ILs是一类优良吸收剂.静电力和范德华力对溶解过程起主导作用.③COSMO-RS模型可定性和半定量用于预测乙酸乙酯和环戊酮的溶解度.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

高效液相色谱测定花粉素中水溶性维生素

本文介绍一种灵敏而准确的高效液相色谱测定花粉素中五种水溶性维生素(即B_1、B_2、B_5、B_6和B_(12))方法。研究了移动相醋酸盐缓冲溶液的浓度和PH对色谱分离效果的影响,水溶性维生素的定量分析是用日立3011-N的填充柱(其内径为4毫米,长250毫米),以含有2.5％乙醇的醋酸钠-醋酸组成的缓冲溶液(PH6)作为移动相,在波长254纳米处进行紫外检测,变异系数和回收率分别为2-5％和91.0-101.5％。     

Monitoring of Butter and Ghee (Clarified Butter Fat) for Pesticidal Contamination from Cotton Belt of Haryana, India

Butter (45) and ghee (55) samples were collected from rural and urban areas of cotton growing belt of Haryana and analysed for detecting the residues of organochlorine, synthetic pyrethroid and organophosphate insecticides. The estimation was carried out by using multi residue analytical technique employing GC-ECD and GC-NPD systems equipped with capillary columns. Butter samples were comparatively more contaminated (97%) than ghee (94%), showing more contamination with organochlorine insecticides from urban samples. About 11% samples of butter showed endosulfan residues above MRL value and 2% samples had residues of synthetic pyrethroids and organophosphates each above their respective MRL values. In ghee, residues of HCH & DDT both and of endosulfan exceeded the MRL values in 5 and 20% samples, respectively. Among organophosphates, only chlorpyriphos was detected with 9% samples showing its residue above MRL value. Irrespective of contamination levels, residues above the MRL values were more in ghee. More extensive study covering other agricultural regions/zones of Haryana has been suggested to know the overall scenario of contamination of milk products.     

面向新世纪的MARPOL73／78公约及其附则Ⅱ

国际海事组织目前正在对《ＭＡＲＰＯＬ７３／７８公约》附则Ⅱ－控制散装液体有毒物质污染规则作重大修改，内容包手胡毒液体物质和化学品，这很可能对主管机关、船公司和化工界造成严重的冲击。     

己二胺有机废液在流化床中焚烧的实验研究

在实验室规模的热态流化床试验台上，进行了含5％己二胺有机废液的焚烧 实验研究，在700－900℃范围内，研究温度及空气过剩系数对NOx沿床高的变化规律，以及它们对NOx排放浓度的影响。实验结果表明，沿高度方向上NOx浓度 逐渐降低，并且存在NO2浓度大于NO浓度这一有趣现象，在900℃下氧量增加有利于密相区NO、NO2浓度的降低，说明在 有氧条件下NH2促进NOx的还原，在不同空气 过剩系数下和然相区出口NOx几乎为零 ，表明900℃是己二胺有机废液焚烧 的合适温度。     

烧结砖生产中氟的逸出及钙基废渣固氟特性研究

砖坯烧制过程中，氟逸出的初始温度约为600℃，大部分氟在约800℃至砖坯发生明显烧结的温度内逸出，以CaO含量高的粘土原料制砖，氟逸出量相对较少。在此基础上，提出在制砖原料中添加适量钙基废渣抑制氟的逸出，并进行了详细的实验室和工业性试验；结果表明，在适宜添加量下，存氟率由约25％增至70％以下，且不影响砖制品质量。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.