Estimating Trophic State Proportions of a Regional Lake Population: Are Larger Samples Always Better?

During the summers of 1991–1994, the Environmental Monitoringand Assessment Program (EMAP) sampled 344 lakes throughout thenortheastern United States using a proportional stratified sampling design based on lake size. Approximately one-quarter ofthe 344 lakes were sampled each year (4 years) for totalphosphorus to determine the proportion (and associated95% confidence intervals) of the northeast lake population 1ha (11,076 ± 1,699 lakes) that was in oligotrophic,mesotrophic, eutrophic, or heupereutropic (4 classes) conditionaccording to the total phosphorus criteria of the North AmericaLake Manegement Society. Estimates for the second, third, andfourth yr were developed as cumulative of the previous yrsamples and the current yr samples for the northeast as a wholeand for each of its three ecoregions (4 regions). New confidence intervals were computed for each cumulative yrcondition estimate. This produced a total (4 years × 4classes × 4 regions) of 64 cumulative yr tropic conditionestimates. Confidence intervals for 21% of these estimates didnot shorten with increased sample size. This phenomena raisedquestions about the accuracy of estimates based on cumulativesampling procedures. We explain why and how the phenomenon comesabout with both straight random and proportional randomsampling. Further, we present an example of the effects thisphenomenon has on lake tropic state condition estimates in thenortheastern United States.     

冷摆辗模具的材料选择及其热处理

模具寿命是冷摆辗的关键问题之一。选择合理的模具材料以及采用适宜的热处理工艺可以提高冷摆辗模具的强韧性,从而提高模具寿命。基于摆动辗压工艺的基本原理,分析研究了冷摆辗模具的受力情况,并对冷摆辗模具材料的选择及热处理工艺作了探讨。     

新型双向挤压模架

此文介绍一种新型液压模架的结构及工作原理。该模架导向精度高,生产节拍16件/分。     

精密模锻模具设计

先从三种角度 :锻造设备和工作条件 ,钢材的加热温度和凹模结构形式对精密模锻模具进行分类 ;然后从六个方面讨论精密模锻模具设计要点模膛设计 ,凹模尺寸设计和强度计算 ,凸模尺寸和强度计算 ,模具的导向装置 ,顶出装置及飞边槽尺寸的设计     

张道口-1井水位观测精度变化分析研究

本文对张道口-1井模拟水位、数字化水位观测精度进行了对比，进一步分析了影响数字化水位观测精度的几个因素，提出了数字化水位在日常观测中应注意的几个问题。     

齿形零件的冷摆辗成形

介绍了摆辗成形工艺的基本原理,综述了齿形零件冷摆辗精密成形和摆动辗压设备研制的概况.指明用压力加工方法,特别是冷摆辗工艺.加工精密齿形可提高零件机械性能,节能节材.     

精密模锻件的设计要点

讨论了精密模锻件的分类密集形状的锻件、盘形锻件和长杆形锻件 ,以及精密模锻件的设计要点精密模锻件的机械加工余量、尺寸精度和表面粗糙度、分模面的选择、模锻斜度、圆角半径、肋的设计和腹板厚度的设计     

钼锑抗分光光度法测定总磷的精密度偏性试验分析

通过钼锑抗分光光度法测定总磷的精密度偏性试验及其结果分析,提出本标准方法用光程10mm比色皿比色测定时,由于测定的灵敏度较低,使总磷低浓度测定的精密度和准确度难于达到标准方法要求;建议钼锑抗分光光度法测定总磷时,最好选用30mm比色皿比色测定.     

1420Al-Li合金特深模锻件偏心问题分析及对策

对 14 2 0Al Li合金特深模锻件在实际生产 (反挤压 )过程中所产生的偏心问题进行了分析 ,分析表明 ,在上下的方向上 ,润滑不均将使冲头产生弯曲变形和使挤压筒上抬 ,致使锻件产生明显的偏心 ;在左右方向上 ,冲头的轴线相对于挤压筒轴线左偏 ,是产生偏心的主要原因。文中还提出了纠偏的措施。     

催化CODcr快速测法的精密度与准确度实验

化学需氧量标准分析方法测定时间长、操作繁琐。本实验采用CTL—BX3C型便携式COD快速测定仪能在20分钟获得COD数据，同时耗能低、省时省力、减少污染。催化CODcr快速法的精密度与准确度均能达到要求。