The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

CHEMISTRY OF COALBED METHANE DISCHARGE WATER INTERACTING WITH SEMI‐ARID EPHEMERAL STREAM CHANNELS1

ABSTRACT: The objective of this study was to examine the chemistry of Coalbed Methane (CBM) discharge water reacting with semi‐arid ephemeral stream channels in the Powder River Basin, Wyoming. The study area consisted of two ephemeral streams: Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, the pH and electrical conductivity (EC) were measured in the field. Samples were transported to the laboratory and analyzed for alkalinity, major cations, and anions. From the measurement of sodium (Na), calcium (Ca), and magnesium (Mg), practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated. Results suggest pH and EC of CBM discharge water was 7.1 and 4.3 dS/m, respectively. The CBM discharge water consisted of higher concentrations of sodium and alkalinity compared to other components. The pH of CBM discharge water increased significantly (p = 0.000) in the downstream channel of Burger Draw from 7.1 to 8.84 before it joined with the Powder River. Dissolved calcium concentration of CBM discharge water decreased significantly (p = 0.000) in the downstream channel water. Subsequently, SARp increased approximately from 24 to 29. The SARt also increased significantly (p = 0.001) in the downstream channel water. For instance, SARt of CBM discharge water increased from 32.93 to 45.5 downstream channels after the confluence of Sue Draw with the Burger Draw. The only significant difference in water chemistry above and below the confluence of Burger Draw with the Powder River was pH, which increased from 8.36 to 8.52. The significant increase in SAR values of CBM discharge water in Burger Draw and Sue Draw tributaries suggest a careful monitoring of salinity and sodicity is needed if CBM discharge water is used for irrigation in semi‐arid environments. Results discussed in this study will be useful to downstream water users who depend on water for irrigation.     

红外和热分析联用在化工产品研究中的应用

运用实例论述了红外光谱分析与热分析联用在化工产品的产品开发和检测方面的应用。     

工业园能源代谢分析

运用工业代谢分析方法对某农药化学工业园能源代谢系统进行量化分析. 结果表明:提升能源转化水平、改善能源利用效率是优化该工业园能源系统的2个有效途径,可减少能源代谢过程中的资源消耗与环境压力. 进一步根据能源代谢模型量化分析得出,提升工业园热电厂运行水平,达到供热煤耗0.043 t/GJ,供电煤耗4.538 t/(104 kW·h)(2004年江苏省平均水平),将较2005年水平减少原煤消耗35.31%;将能源利用水平较低企业的电力利用效率和蒸汽利用效率分别提高到园区平均水平(58.01%和63.84%),可较2005年水平减少原煤消耗2.5%左右.      

电子产品虚拟试验评估技术综述

介绍了虚拟试验技术在电子产品评估鉴定中的应用方法。首先论述了虚拟试验技术产生的背景及其技术优势。然后结合国外的研究状况,重点对电子产品虚拟试验评估技术的基本流程和涉及的关键技术作了总结和归纳。最后,指出虚拟试验技术在电子产品评估中具有广阔的应用前景。     

废物水泥窑共处置产品中重金属释放量研究

通过模拟煅烧实验制取水泥熟料,并采用国标GB/T 17671-1999制取混凝土样品.选用EA NEN7371和EA NEN7375浸出方法,利用基于菲克扩散第二定律的一维扩散模型对废物水泥窑共处置产品（混凝土）中重金属长期累积释放量进行了研究.结果表明,混凝土中重金属的最大释放量低于总量;各种重金属在混凝土中的扩散系数不同,且Cr>As>Ni>Cd; Cr、As、Ni和Cd 30a的累积释放量分别为4.43、 0.46、 1.50和0.02 mg/kg,释放率（累积释放量/最大释放量）分别为27.0%、 18.0%、 3.0%和0.2%;扩散系数是影响重金属累积释放量的重要因素,且两者表现出较好的相关性;Cr和As的扩散系数较大（分别为1.15E-15 m²/s和6.42E-16 m²/s）,应重点控制其进入水泥窑处置过程的总量.     

印染废水中铬的活性炭吸附及资源化研究

在实验室条件下利用活性碳柱对印染废水进行了铬的吸附,对活性碳柱进行逐级加热、逆流漂洗再生,达到了较好的处理效果,同时还回收了铬盐。     

瑞平塘河氟化物污染状况调查及溯源研究

以2016—2020年地表水常规监测结果为依据,发现瑞平塘河自2017年起出现氟化物质量浓度升高现象,2020年其中1个断面氟化物质量浓度平均值达到1.25 mg/L,比2016年高出145%。为此于2021年3—6月,对瑞平塘河流域的氟化物污染状况进行实地调查并开展溯源研究。研究结果显示,2021年氟化物质量浓度超过1.0 mg/L的点位占59.34%,其中超过1.5 mg/L的点位占42.86%,表明大部分河道氟化物质量浓度已经超过水体功能区要求,对生态环境安全构成较大潜在风险。溯源调查结果表明,排除了农业源及矿山源污染的可能,乳胶制品企业排放的废水为瑞平塘河氟化物的污染来源。针对目前该行业的排放标准和环境影响评价均未提及氟化物污染,企业废水处理设施也无除氟工艺单元,缺乏有效的污染防治措施与监管要求等问题。提出,应及时组织开展该区域乳胶制品行业整治提升,增加氟化物处理工艺单元,提升出水水质,确定氟化物排放浓度限值,并对该行业排放标准做进一步研究和完善等建议。     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

垃圾渗滤液中典型内分泌干扰物质(EDCs)细胞毒性分析

垃圾渗滤液的人类健康风险评估日益受到人们重视,也成为研究热点。本文采用一种新型高级氧化技术UV-Fenton处理渗滤液,并用人体乳腺癌细胞(MCF-7)评估处理过程中渗滤液原液以及渗滤液中典型内分泌干扰物质(EDCs)的细胞毒性,对垃圾渗滤液中EDCs的细胞毒性和变化规律进行了研究。结果表明渗滤液中的邻苯二甲酸二丁酯(DBP)、双酚A(BPA)、壬基酚(NP)是产生细胞毒性的主要物质,其毒性大小为DBPBPANP。在同样的氧化降解过程中显示出不同毒性变化规律,通过GC-MS分析,结果显示UV-Fenton过程中产生了大量的中间产物,这也是引起毒性变化的主要原因。实验结果也说明垃圾渗滤液细胞毒性可以通过UV-Fenton过程有效去除。