基于响应面优化条件下柚皮对Pb2+的吸附

采用Plackett-Burman(P-B)法和中心复合设计(Central Composite Design,简称CCD)对影响柚皮吸附Pb2+的6个条件进行筛选优化.P-B实验设计与统计学分析表明:pH值、Pb2+初始浓度、吸附剂用量是影响吸附率的3个关键因素.以吸附率为响应目标,对3因素进行中心复合设计,并经响应面法优化分析得到影响吸附率的二阶模型,确定了Pb2+吸附实验的最优操作条件:pH值5.4.Pb2+初始浓度为265.86mg·L-1,吸附剂用量为2.56 g·L-1,实测吸附率达到92.47%,吸附量为96.01 mg·g-1;整个吸附过程吸附剂柚皮没有经过任何化学预处理.效果优于一般的天然吸附剂.研究结果表明,柚皮是一种很具潜力的环保型廉价吸附剂.     

Anaerobic digestion of agro-industrial waste enriched with bovine bone meal for improved biogas production and biofertilization

The increase in animal and agro-industrial production must be accompanied by the development of appropriate waste and by-product management strategies. Anaerobic digestion is a promising approach to recycle these wastes and reintegrate them into the economic production cycle of biogas and biofertilizer. In order to improve the performance of the anaerobic mesophilic digestion of abundant agro-industrial wastes constituted by potato peel (PP), and poultry waste (PW) and study the contribution of bovine bone meal (BB) as additive rich in phosphorus, which can help to neutralize the acidity of the substrate. The 10-point simplex-centroid design and the isoresponse surfaces strategy were used. This study demonstrated that in mesophilic bio-digestion, the using bovine bones in admixture with agroindustrial residue provided for the proper balance of chemical components required for proliferation of microbiological agent of bioconversion, which also resulted in an increase in biogas production capacity. The best formula was so composed by 66.67% bovine bone, 16.67% potatoes peel, and 16.67% poultry waste. The stability was achieved here after only 12 days. The digestate generated from it was fulfilled with the microbiological and chemical requirements for safety defined by the NF U44-551 standard. Germination test revealed that this optimal produced digestate, did not hinder growth, in fact, almost 85% of seed was germinated. Finally, fertilization experiments prove that this digestate can boost the growth of bell pepper (Capsicum annuum).     

改性柚子皮吸附剂对模拟废水中Pb^2＋的吸附性能

以废柚子皮为原料,经ZnCl2浸泡一加热的化学改性手段制备改性柚子皮生物吸附剂,并通过模拟试验研究该吸附剂对废水中Pb^2＋的去除。考察了模拟废水的pH、吸附时间、吸附剂用量和Pb^2＋初始浓度、温度等因素对柚子皮吸附剂去除Pb^2＋的影响,并研究柚子皮吸附剂对Pb^2＋的吸附动力学及吸附特征。结果表明,模拟废水的pH、吸附时间、吸附剂用量和Pb^2＋初始浓度、温度等因素对柚子皮吸附剂吸附废水中Pb^2＋均有显著影响。适宜的吸附条件为pH5．3-6．5,吸附时间1．5h,吸附剂用量10g·L^-1,Pb^2＋初始质量浓度100mg·L^-1,温度30℃。在该条件下,废水中Pb^2＋去除率在90％以上。柚子皮吸附剂对废水中Pb^2＋的吸附符合动力学二级反应方程,等温吸附规律可用Langmuir、Freundlich和Temkin模型进行较好的描述。     

Valorization of agro-industrial fruit peel waste to fluorescent nanocarbon sensor: Ultrasensitive detection of potentially hazardous tropane alkaloid

• Transformation of agro-industrial waste to value-added material via green chemistry. • Orange peel is valorized into fluorescent nanodiamond-like carbon (fNDC) sensor. • fNDC detects potentially hazardous drug atropine sulfate (AS). • fNDC recognizes AS in biological fluids and pharmaceuticals. • fNDC assures applications in clinical and forensic toxicology. Millions of tonnes of agro-industrial waste are generated each year globally, with the vast majority of it going untreated, underutilized, and disposed of by burning or landfilling, causing severe environmental distress and economic downturn. A practical solution to this global issue is to use green chemistry to convert this waste into value-added products. Accordingly, in the present study, agro-industrial orange peel waste was valorized into fluorescent nanodiamond-like carbon sensor via a green route involving hydrothermal treatment of microwave carbonized orange peel waste. The developed sensor, used for the fluorescence detection of potentially hazardous drug atropine sulfate, exhibits unique dual linearity over concentration ranges of 300 nM to 1 M and from 1 M to 10 M, as well as ultra-low sensitivity of 34.42 nM and 356.46 nM, respectively. Additionally, the sensor demonstrates excellent reproducibility, high stability, and satisfactory recovery when used to identify and quantify atropine sulfate in biological samples and commercially available pharmaceuticals, indicating promising multidisciplinary applications.     

化学溶胀法分离废弃线路板中金属与基板

废弃线路板的粉碎和所含金属组分的高效解离是后续分选回收的前提条件。本研究分别使用乙二胺等10种溶剂浸泡废弃线路板,比较对线路板中铜箔与基板间剥离强度的影响,从而筛选出4种有代表性的溶剂,即溶剂D、溶剂F、丙酮和水, 比较废弃线路板经化学溶胀后的单体解离度和获得一定粒径分布的颗粒所需的破碎时间。研究结果表明,化学溶胀后破碎能大幅提高金属的单体解离度,浸泡效果的优良排序为：溶剂D>溶剂F>丙酮>水;浸泡时间越长,浸泡温度越高,对剥离强度的降低越有利;使用溶剂D在150℃、3 h或140℃、5 h的工艺下浸泡废弃线路板,可以使铜箔与基板自动脱落。研究结果为后续的分选提供了便利的条件。     

柚皮的综合利用及色素稳定性研究

设计了一套柚皮综合利用的方法,分别用水蒸气地和混合盐析法提取其中的香油、色素、果胶,并对柚皮红棕色素的稳定性作了研究。结果发现该色素在酸性条件下非常稳定,有机酸、糖类及Mg^2 等对该色素影响不大。本研究可为柚皮资源的开发利用提供重要的理论依据和方法。     

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption.Two types of adsorbent materials,the zirconium hydroxides embedded in pomegranate peel(Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel(Zr-La/Peel) were developed.Scanning electronic microscopy(SEM),x-ray photoelectron spectroscopy(XPS) and x-ray diffraction(XRD) were evaluated to give insight into the physicochemical properties of these adsorbents.Zr-La/Peel exceeded the a...     

柚子皮生物炭的制备及对水体中锰离子的吸附

以柚子皮为原料经硫化钠活化后炭化处理制备了生物质炭吸附剂,并将之应用于含锰废水的吸附。考察了溶液p H值、底液质量浓度、生物炭投加量等因素对柚子皮生物炭吸附能力的影响,并研究了柚子皮吸附剂对锰离子废水的吸附平衡和动力学特征。结果表明:柚子皮吸附剂对含锰废水具备较强吸附能力,在溶液p H值为6,底液质量浓度为50 mg/L,吸附剂投加量为2 g/L的条件下,对锰离子的去除率为93.5%;吸附平衡实验表明该等温吸附过程符合Langmuir方程,饱和吸附量为24.691 mg/g;吸附动力学研究表明,该吸附过程符合二级动力学方程,吸附速率常数为0.028 6 g/(mg·min)。     

柚子皮制备生物炭吸附苯酚的特性和动力学

廉价的柚子皮作为原材料制备生物炭吸附剂对含苯酚废水进行吸附研究。扫描电镜结果表明,柚子皮制备的生物炭具有较好表面吸附空间结构,比表面积测定为261.69 m2/g。此外,能谱对柚子皮生物炭元素分析发现,生物炭主要含有C、O、P、K,这些是生物质特点。红外对柚子皮生物炭分析发现生物炭含有羟基、氨基、羰基、羧基、磷酸酯或者硫酸酯等活性基团,这些是吸附苯酚的特性官能团。在初始浓度为100 mg/L,投加量为3 g/L,中性pH,30℃条件下吸附30 min后柚子皮生物炭对苯酚的去除率达到76.4%。伪二级动力学方程能很好地拟合柚子皮生物炭对苯酚的吸附过程。同时,Langmiur和Freundlich等温方程在整个温度都能较好地拟合数据,在30℃时,Langmuir理论最大吸附容量可达到49.75 mg/g。通过实际废水应用实验,表明柚子皮生物炭是一种有潜力可用于高浓度含酚废水的处理的有效材料。     

炭化柚子皮对废水中双酚A的吸附

采用磷酸二氢钾活化原材料柚子皮,分别在300℃和600℃对活化后柚子皮进行炭化,制得吸附剂（CC300和CC600）,通过静态吸附实验研究了炭化柚子皮对双酚A的吸附性能。采用比表面积分析仪对炭化柚子皮进行表征,实验考察了pH值、吸附时间和温度对双酚A吸附的影响,并详细研究了炭化柚子皮对双酚A的吸附行为和机理。结果表明,高温炭化柚子皮（CC600）吸附双酚A能力比低温炭化（CC300）的强,其吸附较好地满足Langmuir和Freundlich等温方程;动力学研究表明,其吸附速率快,在150min内能达到吸附平衡,准二级动力学模型较好地描述该吸附行为,相关系数高达0．99：计算了热力学参数△G、△H和△S的值,△G为负值,说明该吸附过程为自发过程。