节约型社会基本内涵的初步研究

从我国提出建设节约型社会的战略意义出发，对节约型社会的定义进行了界定；指出了节约型社会的实质和基础是指物质资源的节约使用；描述了节约型社会的形成与目标；分析了节约型社会的基本内涵、特征及其架构；论证了节约型社会与循环经济的关系，并提出了建设节约型社会的路径选择和对策。     

裂解温度和离子强度对不同来源生物炭胶体释放行为的影响

近年来环境中生物炭胶体形成受到广泛关注,它是生物炭在环境中物理分解作用的重要过程,对污染物迁移有着重要影响.然而,目前对生物炭胶体释放过程和影响因素的研究甚少,人们对生物炭胶体释放机理的认识还很有限.本研究以小麦秸秆和花生壳为生物质来源,系统地探讨了生物炭的裂解温度（300~700 ℃）和溶液离子强度（0.1~10 mmol·L^-1）对生物炭胶体产率的影响.结果表明,随着裂解温度的升高,生物炭的耐磨性增强,且在较高的裂解温度下（≥500 ℃）花生壳生物炭的耐磨性显著强于小麦秸秆生物炭.生物炭的胶体产率受到生物质来源和裂解温度的显著影响,花生壳生物炭的胶体产率低于小麦秸秆生物炭,高温裂解（≥600 ℃）生物炭的胶体产率显著低于中低温裂解生物炭.在相同溶液离子强度下,生物炭胶体产率与其亚微米级碎片率呈显著正相关（p<0.05）,即生物炭中亚微米级碎片率越高,生物炭胶体产率越高.当溶液离子强度从1 mmol·L^-1增加到10 mmol·L^-1时,两种来源生物炭的胶体产率均显著降低,其降低的程度因生物炭裂解温度而异,其中低温裂解（300 ℃）生物炭的胶体产率降低了11.1%~11.2%,中高温裂解（≥ 500 ℃）生物炭的胶体产率降低了60.0%~97.2%.     

中国工业园区绿色发展政策对比分析及对策研究

为了提升我国工业园区绿色发展水平,对目前我国工业园区发展历程、现状特征进行了分析,对工业园区绿色发展政策进行了梳理和对比,并结合工业园区绿色发展中存在的问题提出了对策建议.研究表明:①我国工业园区经历了快速发展、调整发展和科学发展等阶段,在经济发展、资源与能源优化利用、污染减排等方面成效显著.②我国工业园区绿色发展的相关政策主要体现在国家生态工业示范园区创建、园区循环化改造、国家低碳工业园区试点、绿色园区建设和UNIDO绿色工业园区创建等工作中,这些政策在推动主体、实施路径、侧重方向上各不相同又各有特色,对推动工业园区节能减排绩效明显.③目前,我国工业园区绿色发展存在的问题主要表现在重视程度有待提升、风险防范意识有待加强、创新能力有待提高等方面.为此,提出了我国工业园区绿色发展对策建议:积极践行绿色发展理念,推进园区绿色化、生态化、低碳化建设,实现经济环境双赢;注意环境风险防控,确保环境安全;创新管理机制,强化监督管理.      

Integrated nutrient management and waste recycling for restoring soil fertility and productivity in Japanese mint and mustard sequence in Uttar Pradesh, India

Supplementing the nutrient requirement of crops through organic manures plays a key role in sustaining soil fertility, and crop productivity and reducing use of fossil fuels. Field experiments were conducted for 2 years at two different locations (i.e. Lucknow and Pantnagar) in Uttar Pradesh, India. The objectives of the study were to assess the herb and essential oil yields of Japanese mint (Mentha arvensis cv. Hy 77), and its nutrient accumulation under single and combined applications of organic manures and inorganic fertilizers (NPK). Changes in physical and chemical characteristics of the soils (Fluvisols, Mollisols) were also determined. Eight treatments comprising different combinations of NPK through inorganic fertilizers and farm yard manure (FYM) were compared. The distilled waste of mint after extraction of essential oil was recycled to soils in the plots to supplement the nutritional requirement of the succeeding mustard crop (Brassica juncea cv. Pusa Bold). Herb and essential oil yield of mint were significantly higher with combined application of organic and inorganic sources of nutrients as compared to single applications. Accumulation of N and P was at par under full inorganic and combined supply whereas, K accumulation was higher with the former. Soil organic C and pH after harvest of mint did not significantly differ among the treatments, but the level of mineralizable N, Olsen-P and NH₄OAc extractable K were higher in soil with integrated supply of nutrients. Significant increase in soil water stable aggregates, organic C, available NPK and microbial biomass, and decrease in soil bulk density were observed with waste recycling over fertilizer application. These benefits were reflected in the seed and stubble yield of mustard which succeeded mint. This study indicates that combined application of inorganic fertilizers with organics helps in increasing the availability of nutrients and crop yield and provides a significant effect to the succeeding crop. Similarly, recycling crop residues reduces the need for fossil fuel based fertilizer, and helps in sustaining and restoring soil fertility in terms of available nutrients and major physical and chemical characteristics of the soil.     

西部干旱半干旱地区水资源再生利用分析

结合西部干旱半干旱地区的地域特点、水文特征和水资源开发利用状况，分析论述了该地区水资源短缺与水污染加剧这一矛盾所决定的西部地区水资源开发利用的特点及其对地区经济发展的制约，认为水资源的再生利用是解决西部地区水资源危机的一条有效途径。以城市污水为再生水源，根据该区域特点，提出了西部干旱半干旱地区水资源再生利用的研究内容。     

四氟乙烯清洁生产工艺和污染控制

分析了传统空管裂解生产四氟乙烯工艺存在的污染问题 ,介绍了水蒸汽稀释裂解生产四氟乙烯工艺的污染控制情况。     

机车检修污水处理回用设施实例分析

机车清洗污水经撇油、酸碱中和、气浮、过滤、活性碳吸附等工艺流程的处理后,进行全封闭循环,再用于清洗机车,合理选择污水处理工艺流程是确保处理后的污水能否经济、合理回用的关键.     

胶粉的生产利用现状及前景分析

废橡胶作为工业垃圾 ,已为世界所公认 ,介绍了废橡胶回收利用的意义和方法 ,着重阐述了胶粉的生产利用现状 ,并简要分析了胶粉的生产利用前景     

面向经济回收的产品设计系统构成

面向回收的产品设计能够使废旧产品得到更好的回收和重用，优化拆卸序列的生成必须基于产品拆卸的经济性分析。论述了面向经济回收的产品设计系统的构成及相关的关键问题，分析了产品的零件材料回收价值与拆卸工艺，建立了零件材料合理回收的评估方法。