超细煤矸石矿粉作天然橡胶补强填充剂的性能研究

以煤矸石为原料，通过超细粉碎、表面改性等深度加工，制取了一种新的橡胶补强剂，并对煤矸石作补强剂影响因素进行初步的研究，实验表明它能够取代或部分取代炭黑用作天然橡胶的补强剂。     

DENSITY CURRENT INTRUSIONS IN AN ICE-COVERED URBAN LAKE1

ABSTRACT: Evidence is presented that snowmelt runoff from an urban watershed can produce density current intrusions (underflows) in a lake. Several episodes of density current intrusions are documented. Water temperatures and salinities measured near the bottom of a 10 m deep Minneapolis lake during the late winter warming periods in 1989, 1990, 1991, and 1995 show significant rapid changes which are correlated with observed higher air temperatures and snowmelt runoff. The snowmelt runoff entering this particular lake (Ryan Lake) has increased electrical conductivity, salinity, and density. The source of the salinity is the salt spread on urban streets in the winter. Heating of littoral waters in spring may also contribute to the occurrence of the sinking flows, but is clearly not the only cause.     

TEMPORAL CHANGES IN THE YADKIN RIVER FLOW VERSUS SUSPENDED SEDIMENT CONCENTRATION RELATIONSHIP1

ABSTRACT: Dynamic linear models (DLM) and seasonal trend decomposition (STL) using local regression, or LOESS, were used to analyze the 50‐year time series of suspended sediment concentrations for the Yadkin River, measured at the U.S. Geological Survey station at Yadkin College, North Carolina. A DLM with constant trend, seasonality, and a log₁₀ streamflow regressor provided the best model to predict monthly mean log₁₀ suspended sediment concentrations, based on the forecast log likelihood. Using DLM, there was evidence (odds approximately 69:1) that the log₁₀ streamflow versus log₁₀ suspended sediment concentration relationship has changed, with an approximate 20 percent increase in the log₁₀ streamflow coefficient over the period 1981 to 1996. However, sediment concentrations in the Yadkin River have decreased during the decade of the 1990s, which has been accompanied by a concomitant increase in streamflow variability. Although STL has been shown to be a versatile trend analysis technique, DLM is shown to be more suitable for discovery and inference of structural changes (trends) in the model coefficient describing the relationship between flow and sediment concentration.     

Influence of particle size on the aggregation behavior of nanoparticles: Role of structural hydration layer

More and more attention has been paid to the aggregation behavior of nanoparticles, but little research has been done on the effect of particle size. Therefore, this study systematically evaluated the aggregation behavior of nano-silica particles with diameter 130–480 nm at different initial particle concentration, pH, ionic strength, and ionic valence of electrolytes. The modified Smoluchowski theory failed to describe the aggregation kinetics for nano-silica particles with diameters less than 190 nm. Besides, ionic strength, cation species and pH all affected fast aggregation rate coefficients of 130 nm nanoparticles. Through incorporating structural hydration force into the modified Smoluchowski theory, it is found that the reason for all the anomalous aggregation behavior was the different structural hydration layer thickness of nanoparticles with various sizes. The thickness decreased with increasing of particle size, and remained basically unchanged for particles larger than 190 nm. Only when the distance at primary minimum was twice the thickness of structural hydration layer, the structural hydration force dominated, leading to the higher stability of nanoparticles. This study clearly clarified the unique aggregation mechanism of nanoparticles with smaller size, which provided reference for predicting transport and fate of nanoparticles and could help facilitate the evaluation of their environment risks.     

预腐蚀条件下不同孔数冷挤压强化7075-T6铝合金板件疲劳寿命退化规律

目的 研究腐蚀环境下单孔和多孔冷挤压强化铝合金板件的疲劳寿命退化规律和损伤机理。方法 针对2种不同孔距的三孔冷挤压强化7075-T6铝合金板件,采用模拟热带海洋大气环境的实验室加速腐蚀谱,开展不同腐蚀时间下的预腐蚀疲劳试验。结果 获得了3倍孔距的三孔挤压强化铝板以及单孔挤压强化铝板的C(t)曲线、疲劳S-N曲线和损伤形貌特征,分析了腐蚀后挤压强化试件的腐蚀机理及挤压强化作用。同时,将不同孔数试件的试验结果进行比较,探明了孔数对挤压强化铝板腐蚀和疲劳性能的影响。结论 腐蚀后挤压强化铝合金板件的疲劳性能发生显著退化,腐蚀损伤主要为剥蚀,疲劳裂纹萌生位置由孔边转移至表面。挤压孔数量对挤压强化铝合金板件的疲劳和腐蚀疲劳性能的影响较小。     

不同温湿度条件下微米硼的氧化过程研究

目的 探究不同温湿度条件下微米硼的氧化层结构特征。方法 利用高温水浴浸泡处理去除原料微米硼的表面氧化层,然后在恒温恒湿条件下对微米硼进行加速氧化,利用扫描电子显微镜、透射电子显微镜和X射线光电子能谱对加速氧化后硼颗粒的氧化层厚度及组成进行分析,总结表面氧化层结构及成分组成变化规律,揭示温湿度条件下微米硼的氧化机制。结果 微米硼经高温水浴浸泡处理后,表面氧化层去除率达到50%。随着加速氧化时间的延长,硼颗粒氧化层的厚度逐渐增大,由内向外硼颗粒表面可以用B-BxOy-B2O3三层结构来表示,BxOy总是伴随着B2O3同时出现的,且随着氧化反应的进行,颗粒表面BxOy的含量将超过B的含量。结论 不同温湿度条件下微米硼的氧化机制为O2向B颗粒内部单向扩散的反应机制,B先与O2反应,形成低氧化物BxOy,BxOy进而与O2反应生成B2O3。随着氧化层厚度的增加,O2向B颗粒内部扩散的阻力增大,氧化反应速率随之降低。相比湿度的影响,温度的升高可显著加快硼表面氧化层的形成;温度一定时,湿度的增加可促进硼氧化层的形成。     

南四湖及主要入湖河流表层沉积物对磷酸盐的吸附特征

研究了南四湖及其主要河流人湖口18个表层沉积物对磷的吸附能力、吸附动力学及其吸附等温线,并对湖区沉积物对磷吸附特征及其理化特征之间的关系进行了探讨.结果表明,对于处于不同营养水平的沉积物,对磷酸盐的吸附具有一致的特征.在前10h沉积物对磷酸盐的吸附量基本达到或超过平衡吸附量的80%,并且在0～1.0 h内吸附反应迅速.在本研究条件下,表层沉积物的cEPC的变化范围为0.010～0.157mg·L-1, Qmax的变化范围是86.74～118.32 mg·kg-1, TQmax的变化范围是99.97～281.11 mg·kg-1·cEPC、NAP、m、Qmax和TQmax与Ads-P都具有显著的正相关关系,沉积物Ads-P含量可以作为指导南四湖水体污染程度的一项指标. m与TQmax之间具有显著的正相关性,吸附效率不仅体现的是对外来磷的吸附效率,还应当包含对本身释放磷的再吸附的效率.对于南四湖沉积物TQmax、NAP和Qmax起到同样的贡献.沉积物的NAP与cEPC之间呈显著正相关性,总的趋势就是,当上覆水中磷含量相等时,具有高的NAP的沉积物易于向上覆水体释磷,反之具有较低NAP的沉积物易从水中吸附磷.     

南黄海表层海水重金属的变化特征及影响因素

根据1997～2004年每年1次的南黄海表层海水重金属(As、Cd、Cu、Hg、Pb、Zn)及有关环境因子的调查数据,重点研究了2003-10南黄海表层海水重金属的分布特征、控制其分布的生物地球化学机制以及8 a的年际变化趋势.结果表明,2003-10南黄海表层海水中As、Cd、Cu、Hg、Pb、Zn的平均浓度分别为2.33、0.078、1.41、0.0036、0.37、6.21μg/L.8 a中重金属除Zn有明显的上升趋势外,其它元素变化较小.重金属的分布模式与离岸距离有关,即除Pb外,在离岸较远的南黄海中部地区含量较低,而近岸海区则普遍较高,这种分布模式典型地体现了人类活动对近海的影响.对于重金属在局部海区的分布,亦存在其它控制因子,如Pb受大气沉降影响较大, Cd与海水盐度和pH密切相关, Hg受海水中有机碳浓度影响较大,沉积物再悬浮影响着As的浓度与分布, Cu、Zn则典型地受到了径流和排污的影响.8 a海水重金属浓度的均值皆符合国家一类海水水质标准,采用潜在生态危害指数法(ERI)分析2003年6种重金属的叠加生态效应,结果显示海水总的重金属生态危害指数较可发生重金属生态危害的ERI值小一个数量级,这从重金属的角度说明南黄海海水质量良好.     

隔膜压滤机滤室最优空腔厚度

利用UG软件对隔膜压滤机滤室内流体进行三维建模,导入Gambit中进行网格划分及边界条件的设定,结合Fluent选用RNG k-ε湍流模型,采用多孔介质模型模拟隔膜压滤机滤室内固-液两相流分离,得到不同空腔厚度下滤室内流体的体积分数轮廓图、压强云图,得出滤饼含水率与空腔厚度大小的关系。实验结果表明,模拟和实验结果具有较好的一致性。在压滤机滤室空腔厚度为12 mm时,滤饼含水率为48%,每天污泥处理量为102 t,隔膜压滤机工作效率最高。