Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

Feasibility of honeycomb monolith supported sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD)

Carbon coated monolith was prepared by sucrose solution 65 wt.% via dip-coating method. Sulfonation of incomplete carbonized carbon coated monolith was carried out in order to synthesize solid acid catalyst. The textural structure characteristics of the solid acid catalyst demonstrated a low surface area and pore volume. Palm fatty acid distillate (PFAD), a by-product of palm oil refineries, was utilized as oil source in biodiesel production. The esterification reaction subjected to different reaction conditions was performed by using the sulfonated carbon coated monolith as heterogeneous catalyst. The sulfonation process had been performed by using vapour of concentrated H₂SO₄ that was much easier and efficient than liquid phase sulfonation. Total acidity value of carbon coated monolith was measured for unsulfonated sample (0.5 mmol/g) and sulfonated sample (4.2 mmol/g). The effect of methanol/oil ratio, catalyst amount and reaction time were examined. The maximum methyl ester content was 89% at the optimum condition, i.e. methanol/oil molar ratio (15:1), catalyst amount (2.5 wt.% with respect to PFAD), reaction time (240 min) and temperature 80 °C. The sugar catalyst supported on the honeycomb monolith showed comparable reactivity compared with the sugar catalyst powder. However, the catalyst reusability studies showed decrease in FFA% conversion from 95.3% to 68.8% after four cycles as well as the total acidity of catalyst dropped from the value 4.2 to 3.1 mmol/g during these cycles. This might be likely due to the leaching out of SO₃H group from the sulfonated carbon coated monolith surface. The leaching of active species reached a plateau state after fourth cycle.     

Funipuncture for fetocide in late termination of pregnancy

The most widely used method for fetocide in late termination of pregnancy for fetal abnormalities (TOPFA) consists of injecting of potassium chloride (KCl) into the fetal heart and is likely to be painful after 22 weeks of gestation. We studied ten consecutive women undergoing TOPFA between 22 and 38 weeks. This technique for fetocide consisted of a single umbilical vein puncture under ultrasound guidance with injections of sufentanil 5 µg followed by KCl 2 g. No electrocardiographic modifications could be observed and maternal plasma potassium levels did not show any significant variation throughout the procedure. Fetal umbilical phlebotomy for fetal analgesia followed by fetocide therefore appears to be a safe procedure for the mother and allows the fetus to die without pain when late termination of pregnancy (TOP) is indicated. Copyright © 2002 John Wiley & Sons, Ltd.     

Evolution of environmental impact assessment as applied to watershed modification projects in Canada

This article reviews the application of environmental impact assessment (EIA) procedures and practices to three watershed modification projects situaled in western Canada. These ventures were justified for accelerating regional economic development, and cover the period during which public concerns for protecting the environment rapidly made their way into the national political agenda. An historical account and analysis of the situation, therefore, seems desirable in order to understand the development of EIA processes, practices, and methodologies since the start of construction of the first project in 1961. This study concludes that there has been good progress in predicting and evaluating environmental and related social impacts of watershed modification proposals. However, a number of obstacles need to be overcome before EIA can firmly establish itself as an effective planning tool. These difficulties include jurisdictional confusions and conflicts, division of authority and responsibility in designing and implementing appropriate mitigative and monitoring measures, lack of tested EIA methodologies, and limited availability of qualified human resources. A number of conclusions and suggestions are offered so that future watershed modification proposals may be planned and implemented in a more environmentally sustainable fashion. These include: (1) EIA processes must be completed before irrevocable decisions are made. (2) Any major intrusion into a watershed is likely to impact on some major components of the ecosystem(s). (3) Mitigation costs must form part of the benefit-cost analysis of any project proposal. (4) Interjurisdictional cooperation is imperative where watersheds cross political boundaries. (5) The EIA process is a public process, hence public concerns must be dealt with fairly. (6) The role of science in the EIA process must be at arms length from project proponents and regulators, and allowed to function in the interest of the protection of the environment and public health and safety. The views expressed here are the authors’ own and do not necessarily reflect those of FEARO and/or other government agencies and officials involved in the review of these projects.     

论环境产业

本文在可持续发展视角下,把环境的保护、修复、维护的生产活动及与之直接相关的服务活动称为环境产韭,包括发挥减少、避免污染环境作用的资源再利用鼗和发挥治理污染物与修复、改善环境作用的环境维护业.通过探讨环境产业的内涵、发展历程、运行机制和在产业体系中的位置与作用,指出环境产业是在法规保障下政府强行推动产生和发展起来的,是产业体系中不可缺少的重要组成部分;考虑自然环境对社会行为的影响,改进政府行为构建适台环境产业与传统产业协调发展的经济体制是加快发展环境产业的关键.     

爆炸事故过程分析中不确定性问题处理方法

针对事故过程分析中的不确定性问题,指出了不确定问题在危险分析中的重要性及处理该问题的复杂性和难点,列出了几种基于非线性数学方法处理不确定问题的基本方法,如微分法、MonteCarlo模拟、Fourier方法、响应表面法等,并对之进行了比较.建议在处理事故过程的不确定性时采用Monte Carlo模拟.     

区域性“减灾十年初步规划”的编制原则

本文简要介绍区域性“减灾十年初步规划”编制的一般原则，包括规划编制的意义、目的、编制顺序和规划应注意的几个方面，并提出规划成果的实施意见。可供各地编制规划时参考。     

羽序灯心草作为酸性矿山废弃地先锋植物潜力

生态复垦是当前世界各国酸性矿山废弃地修复的主要方法.通过研究云南来利山锡矿区废弃地土壤pH值、肥力特征及重金属含量,以及矿区生长的羽序灯心草形态特征和植株体内重金属的分布特征,分析植株耐酸性、对废弃地土壤肥力的适应性及对Zn和Cu等重金属污染的耐性,探讨其作为酸性矿山废弃地先锋植物的潜力.结果表明,研究区域根际土壤pH值均值范围为3.46～4.01,呈酸性;土壤中有机质、全钾、全磷和速效磷含量分别为10.28～25.75g·kg~(-1)、 8.84～9.32g·kg~(-1)、 0.56～0.63g·kg~(-1)和1.82～5.72mg·kg~(-1),处于较低水平;土壤中Zn、Cu和Fe含量均值范围分别为54.93～114.49、 92.53～127.59和47 133.60～112 259.63 mg·kg~(-1),其中重金属Cu含量超出风险筛选值1.85～2.55倍;研究区域羽序灯心草株高均值范围为43.77～55.42 cm,对照组植株高度为51.38～57.66 cm,无显著差异,表明羽序灯心草具有耐酸性及对重金属污染具有耐性.进一步分析对重金属Cu和Zn的富集能力和转移特征,发现对Cu和Zn都具有富集能力,且对Zn具有运转能力,具有一定的富集吸收潜力.株高与根际土壤中速效磷的含量显著相关,后期羽序灯心草作为先锋植物在矿山废弃地进行种植时,可针对性地补充含速效磷的肥料改善土壤肥力条件.综合分析结果表明,羽序灯心草作为先锋植物修复酸性矿山废弃地具有巨大潜力.     

焦化废水处理过程中固相物质的形成及处置方法评价

焦化废水处理过程中产生的焦油、污泥和结晶杂盐等固相物质,既有资源属性,又有污染特性,但目前缺乏基于能源、经济及环境影响方面的评估.本研究阐述了3类固相物质的形成机制,建立了质量当量计算及处置方法评价模型.以宝武集团韶关钢铁股份有限公司焦化厂（二期）焦化废水处理工程的A/O/H/O（厌氧/好氧/水解/好氧）流化床工艺作为考察对象,利用工程运行参数和水质统计数据进行固相物质的产量推算,结果发现,焦油、物化污泥、生物污泥（含水率为80%）和工业杂盐的产率分别为0.186、5.80、4.24和1.97 kg·m^-3.通过处置方法评价模型明确了焦油焚烧、污泥热解、结晶杂盐分盐提纯后工业应用是最佳处置方案,在60 m³·h^-1废水处理规模的固相物质处置过程中,每年约产生1177 MWh的能源,获得135.0万元的经济效益,排放627.0 t CO₂,表明能源回收、经济效益和环境影响的协同存在.