膨润土接枝丙烯酸高吸水性树脂的抑尘性能研究

在微波辐射下制备了膨润土接枝丙烯酸高吸水性树脂(SAP)(一种加入聚乙烯醇(PVA),另一种不加入PVA)。结果表明:(1)红外光谱图表明,PVA与聚合网络形成了半互穿网络结构;X射线衍射图表明,膨润土与PVA、丙烯酸形成了具有无定形结构的复合产物。(2)不论是沙土堆还是尘土堆,喷洒膨润土接枝丙烯酸SAP溶液的抑尘效果明显比喷洒自来水好;喷洒膨润土接枝丙烯酸SAP溶液的尘土堆的抑尘效果好于沙土堆。(3)在温度为15℃时,考虑到节约成本的问题,首选不加入PVA的膨润土接枝丙烯酸SAP做抑尘剂;在温度为45℃时,加入PVA的膨润土接枝丙烯酸SAP适合做抑尘剂。(4)膨润土接枝丙烯酸SAP浓度越高,其耐蒸发性越高。     

Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3- on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60℃. P(AA/AMHA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3-. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

滨海湿地盐沼植被修复中的种子产品制作过程及其有效性

针对当前滨海湿地种子流在潮汐过程中种子有效沉降降低、土壤种子库分布不均、定植效率低和栖息地裸斑现象等关键问题,以黄河三角洲盐沼湿地的盐地碱蓬（Suaeda salsa）为修复物种,研发一种应用于滨海湿地盐沼植被修复的固态种子产品,阐述固态种子产品的制作过程,并开展三种不同保水材料为核心材料（聚丙烯酰胺PAM,羟乙基纤维素HEC,羟丙基甲基纤维素HPMC）的种子产品的有效性研究。研究结果表明：（1）包装制作后的盐地碱蓬种子的吸水倍率和保水持续时间显著高于普通天然种子,表现出良好的吸水保水特性;（2）包装后的盐地碱蓬种子受盐度梯度变化的影响较小,表现出良好的耐盐抗性;（3）包装后的盐地碱蓬种子具有更高的萌发潜力,而不同保水材料的种子产品包装对盐地碱蓬种子萌发的促进作用表现为PAM>HPMC>HEC>天然种子;（4）包装后的盐地碱蓬种子具有更短的悬浮时间和较快的平均沉降速度,表明了种子产品增强了盐地碱蓬种子抵抗水动力干扰的潜力,其中以PAM为保水材料的种子产品可以直接、快速地沉降。本文首次将种子产品技术应用于滨海湿地盐沼植被修复中,为种子产品技术在退化滨海湿地的植被修复领域的应用与实践提供了理论基础。     

羊毛角蛋白接枝聚丙烯酸-丙烯酰胺吸水树脂的制备

以废弃羊毛为主要原料,采用溶液聚合法制备了羊毛角蛋白接枝聚丙烯酸-丙烯酰胺高吸水性树脂。详细探讨了羊毛角蛋白含量、丙烯酸比例、反应温度、交联剂和引发剂等条件对合成树脂吸水性能的影响。结果显示,当角蛋白占比为5 wt%,丙烯酸比例为70%,反应温度为70℃,交联剂用量为0.1 wt%,引发剂用量为0.8 wt%时,改性树脂吸水倍率最好。另外,采用红外光谱、全质构仪和吸水速率对角蛋白改性前后的产物进行了结构分析和性能测试。结果显示,羊毛角蛋白的引入可以提高树脂的强度、吸水速率和耐盐能力。     

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

The graft copolymerization of the starch and acrylic were used to prepare the superabsorbent, and the high oil-absorbing resin was also studied preliminarily. In addition, following the method of the emulsion polymerization, the cerium nitrate amine was regarded as the initiator, the acrylic amide and the methyl methacrylate functioned as the monomer. There are several significant parameters taken into consideration such as the factors that influence the performance of the superabsorbent and the high oil-absorbing resin, the dosage of the initiator amount, the ratio of the starch and the monomer and the dosage of crosslinking agent.     

催化剂厂滤渣制备高吸水复合材料的研究

炼油催化剂厂在生产过程中每年要排除大量的滤渣,对滤渣成分进行了分析,其中SiO2含量为60%左右,Al2O3含量为10%左右,重金属含量不超过土壤环境质量标准值(GB15618-95)。以丙烯酸(AA)、丙烯酰胺(AM)和催化剂厂滤渣等为主要原料,采用水溶液聚合法制备出了滤渣/P(AA-AM)高吸水复合材料,考察了引发剂用量、交联剂用量、单体中和度及滤渣用量对复合材料吸液倍率的影响。结果表明,当中和度为80%,滤渣、引发剂和交联剂用量分别为丙烯酸单体质量的25%、1.0%和0.04%时所制得复合材料吸蒸馏水、自来水和0.9%NaCl达到了1093.2g/g、323.4g/g和74.39g/g。复合材料在25℃下干燥10d,还保持50%的吸水量,在70℃下干燥10h吸水凝胶还可以保持40%的吸水量,表明复合材料具有良好的保水性能。     

Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3? on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60°C. P(AA/AM-HA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3?. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

The graft copolymerization of the starch and acrylic were used to prepare the superabsorbent, and the high oil-absorbing resin was also studied preliminarily. In addition, following the method of the emulsion polymerization, the cerium nitrate amine was regarded as the initiator, the acrylic amide and the methyl methacrylate functioned as the monomer. There are several significant parameters taken into consideration such as the factors that influence the performance of the superabsorbent and the high oil-absorbing resin, the dosage of the initiator amount, the ratio of the starch and the monomer and the dosage of crosslinking agent.