飞机起落架常见故障及原因分析

针对飞机起落架收放作动筒活塞杆划伤、轮轴磨损腐蚀、刹车盘异常磨损、下位锁开锁故障及收放摇臂裂纹等几种典型故障,从结构设计、材料、制造工艺、使用环境和日常维护几个方面分析了各故障产生的原因,提出了预防故障发生的建议,为今后飞机起落架设计提供参考和借鉴。     

变压吸附技术的应用及其发展简述

文章分析了变压吸附技术存在的问题,并提出解决措施。通过对变压吸附技术应用现状的总结,对该技术未来的发展方向进行预测与评价。指出变压吸附技术能够经济高效地实现物质的分离,有望成为分离技术未来的发展方向,为环保和工业生产做出更大贡献。     

一次大面积停电事故原因分析与防范措施

电力系统振荡故障引起的全系统周波、电压的剧烈变化,系统瓦解或大面积停电事故时有发生,无论对系统、电气设备还是用户都会造成极大危害.结合齐鲁公司电网2004年11月18日事故进行分析探讨,提出防范措施,以减少此类事故的发生.     

某厂通廊框架晃动原因及加固处理

对某厂通廊框架进行检测,根据检测结果分析晃动原因,从而提出合理的加固处理方案,保证厂房安全正常使用。     

振打机构摆臂疲劳寿命仿真及可靠性分析

目的 针对振打机构关键部件摆臂,开展疲劳寿命及关键参数影响程度仿真分析,获得寿命分布及可靠性数据,校核摆臂设计是否满足使用要求。方法 基于S-N曲线进行振打机构摆臂的寿命仿真,开展动力学仿真与应力仿真,获得不同温度下摆臂最低寿命与管壁壁厚的关系。通过对关键寿命影响参数进行影响程度仿真分析,获得寿命分布及可靠性数据。结果 当摆臂壁厚大于1.77mm时,摆臂的平均寿命大于144万次,满足产品设计要求。疲劳寿命与弹性模量E负相关,与抗拉强度和表面加工系数正相关。可靠度R取0.8时,摆臂的可靠寿命约为29 005次;可靠度R取0.9时,摆臂的可靠寿命约为11 891次。结论 振打机构摆臂壁厚需大于1.77 mm,摆臂表面质量系数大于0.827 3,材质抗拉强度大于907.76 MPa,弹性模量E小于2.041×10^(5)MPa。     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

变压吸附技术在环境工程中的应用

变压吸附技术具有能耗低、投资少、流程简单、操作方便、可靠性好和自动化程度高等优点,在环境工程领域得到了广泛的应用。介绍了变压吸附技术在废水处理、废气处理、固体废弃物处理等领域的研究进展和应用成果,探讨了在环境工程中应用变压吸附技术的发展方向。     

厌氧发酵沼气提纯技术研究进展

厌氧消化产生的沼气主要成分是甲烷(CH4)50%～70%和二氧化碳(CO2)30%～50%,是一种可持续有价值的能量来源。随着矿石燃料的枯竭,沼气利用的需求不断增长,将沼气提纯到甲烷含量90%以上可取代天然气而受到广泛关注。目前沼气提纯在工业上主要通过变压吸附、吸收或膜分离等技术实现CO2的去除,也有研究者探索了原位沼气提纯技术,即在厌氧反应器中通过一定的措施实现沼气提纯,为现阶段沼气提纯技术提供新的思路和研究方向。     

Effects of Ergorest® Arm Supports on Muscle Strain and Wrist Positions During the Use of the Mouse and Keyboard in Work With Visual Display Units: A Work Site Intervention

The effects of Ergorest^® arm supports on wrist angles and musculoskeletal strain in the neck-shoulder-arm region and electrical activity in the shoulder and arm muscles were studied during typing or the use of the mouse in work with a visual display unit (VDU). Twenty-one women were randomized into 3 groups (1 arm support, 2 arm supports, and control). Measurements were carried out before and after the 6-week intervention. The wrist extension of the mouse hand, the muscle activity of the trapezius muscle, and the subjective discomfort ratings indicated that 2 arm supports were better than 1 in work with a mouse. The Ergorest^® arm support alleviates muscle and joint strain in VDU work when used for both arms.     

输油臂紧急脱离装置非正常脱离事件分析及预防

描述了一起大型原油码头输油臂紧急脱离装置非正常脱离事件,分析得出该事件是由于接近开关进水、限位阀阀杆伸缩卡阻、维护管理不到位造成的,提出了非正常脱离的防范措施。