爆炸法处理废旧轮胎制造橡胶粉末技术及关键机理研究

主要介绍了利用爆炸法处理废旧轮胎制造橡胶粉末的技术 ;探讨了橡胶在爆炸作用下破坏的机理 ,爆炸法中橡胶变形速率与它的剪切模量和断裂韧性的关系 ;分析了利用直接爆炸法处理废旧轮胎的 3种实验结果 ,验证了对轮胎进行预处理的必要性 ,探讨了炸药用量的选择原则     

废轮胎流化床气化特性试验研究

为了掌握废轮胎在流化床内的气化特性,利用自行设计的小型流化床试验装置系统,对废轮胎在不同的过量空气系数下在400～700℃温度范围内进行了空气气化实验.分析了废轮胎气化效率、固定碳转化率、气化气热值、产气量以及气化气成分随气化温度、过量空气系数的变化规律.结果表明,废轮胎气化的最佳运行条件为气化初始温度700℃,过量空气系数α=0.4.在此条件下得到的气化气成分主要包括CH₄、CO、H₂、C₂H₆和高分子有机化合物,此时的气化效率为47.96%,气化气低位热值为4 804kJ/m³.     

一种新型废旧轮胎组合拦石结构的试验研究

提出了一种由废旧轮胎组成的拦石结构,该结构用钢丝绳将废旧轮胎进行合理的绑扎,使轮胎与轮胎之间紧密连接,然后将该结构绑扎在用废旧钢轨或钢筋混凝土制作而成的柱子上面.当拦石结构受到落石冲击时,利用废旧轮胎的弹塑性变形吸收冲击能量.为了考察这种由废旧轮胎组成的拦石结构的防护效果,设计了试验模型,采用20 kg的砝码模拟落石,...     

我国海洋塑料垃圾和微塑料排放现状及对策

当前海洋塑料和微塑料污染问题是全球研究热点,随着我国陆源垃圾减量化处置率和生活污水处理覆盖率的提高,重新核算我国海洋塑料垃圾和微塑料排放量尤为重要,基于文献已报道的关于海洋塑料垃圾和微塑料排放量估算的方法并结合相关统计数据对我国相应排放量进行了核算.结果表明:2016年我国向海洋中排放塑料垃圾124×104~331×104 t,略低于2010年的132×104~353×104 t;生活污水处理厂向环境中排放塑料微珠约109.95×1012粒（折合131.78 t）,远低于2014年报道的209.7×1012粒（折合306.9 t）.此外,2016年我国生活污水处理厂向环境中排放合成化学纤维类微塑料约1 296.95×1012个（折合648.48 t）,轮胎与地面摩擦产生合成橡胶轮胎粉尘约78.85×104 t;合成化纤类微塑料和合成橡胶轮胎粉尘等已成为陆源微塑料的重要来源.通过与发达国家和地区在海洋垃圾和微塑料污染、陆源垃圾处置、海洋垃圾污染应对等方面进行比较,未来我国应通过完善"限塑令"和生活垃圾分类体系、尽早实施"塑料微珠"限令、明晰生活污水处理厂微塑料排放状况等手段从源头控制排放,此外需有效控制塑料垃圾和微塑料的输送途径,制定和完善相关法律法规和监测标准,提升我国应对海洋塑料垃圾和微塑料污染的能力和国际影响力.      

爆炸法回收废旧轮胎实验研究

利用爆破法处理废旧轮胎,通过观察测量废旧轮胎爆破后的橡胶碎片量,考察了不同炸药对轮胎回收效果的影响。通过测量加入不同比例消焰剂的TNT爆破回收量,确定了最佳配比范围。研究表明,在TNT中加入消焰剂可有效提高轮胎爆破回收效果,消焰剂加入量10%~15%时效果最佳。     

Design of unsurfaced roads constructed with large-size shredded rubber tires: a case study

Stockpiles of scrap tires are serious fire hazard, public health hazard, and an environmental burden. The construction of road embankments, using tire shreds as a lightweight fill, can consume large quantities of scrap tires and has certain engineering benefits. All the previous research focused on small size tire shreds (3–6 in. size) in terms of its use in civil engineering applications and determination of the engineering/environmental properties. This research specifically focuses on large size tire shreds (12 in. size) and its direct comparison with the other sizes of the tire shreds to develop mechanistic-empirical practical design model and so that the use of tire shreds in road bases could be used on regular basis with enhanced reliability instead of on an empirical basis. The research also examines the potential environmental implications of the use of shredded rubber tires and the comparison of the short-term results with other long-term monitoring studies.     

不同环境介质轮胎微塑料老化及小粒径微粒释放特征

为了探究轮胎微塑料在不同环境介质中的老化和小粒径微粒释放特征,于实验室条件下模拟了汽车和电动自行车两种不同的轮胎微塑料在干燥和水环境中的老化过程.结果表明,轮胎微塑料经过30 d的紫外光照后会发生一定程度的老化,具体表现为表面变得粗糙,出现裂纹和剥落等现象.通过傅里叶红外光谱得知,其表面羰基指数也有所上升.此外,轮胎微塑料在紫外光照和水力作用的影响下会释放大量的亚微米级小粒子,水环境中的汽车轮胎微塑料在光照条件下第30 d时每mL溶液中释放粒子数量达到了69 480万个,其中粒径小于1 μm的有69 460万个,是黑暗条件下的100倍左右.研究表明,水环境中的轮胎微塑料在光照条件下更易发生老化并释放更多的小粒子,且汽车轮胎微塑料较电动自行车轮胎微塑料释放的小粒子更多,具有潜在的生态环境风险.     

废轮胎热裂解行业清洁生产审核方法研究

文章对废轮胎热裂解企业清洁生产指标体系和审核中元素平衡法的运用进行了研究;用实例验证了元素平衡法在裂解企业清洁生产审核中的作用。通过审核发现,裂解企业存在原料利用率低、能源浪费等问题;针对企业存在的问题提出了清洁生产方案。研究结果表明,符合裂解企业特点的清洁生产指标体系和元素平衡法在裂解企业的清洁生产审核中起到了积极的作用,为企业节能减排方案的制定提供了方法支持。     

Rubber tire life cycle assessment and the effect of reducing carbon footprint by replacing carbon black with graphene

This research utilizes real operating data from a tire plant operating in Central Taiwan to investigate the carbon footprint emissions (CO₂e) involved in producing the electric bicycle. The simulation results are based on the PAS 2050 standard using the SimaPro 7.3 software tool. Our results show the total carbon footprint emissions of 1.2-kg tire for the electric bicycle weighing 4.53-kg CO₂e, composed of 2.63-kg CO₂e from raw tire materials stage, 1.295-kg CO₂e from tire manufacturing stage, and 0.605-kg CO₂e from tire transport stage. An international certified organization, British Standard Institute (BSI), verified the accuracy of our results as 98.7%. We found that carbon emissions at the raw materials stage were higher than that for the other two stages – manufacturing and transportation. Carbon black was determined as the maximum source of carbon emissions at the raw material stage. To reduce the tire plant carbon emissions, this paper recommends using graphene to replace carbon black. Graphene has been reported by many researches to improve the properties of rubber products. From our simulation results, the carbon footprint emissions of 4.56-kg CO₂e of the origin tire plant uses 0.456-kg carbon black to produce 1.2-kg electric bicycle tires. This can be reduced to 4.29 (5.92%), 4.03 (11.62%), 3.75 (11.76%), and 3.49-kg CO₂e (23.46%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. If we focus only on 0.456-kg carbon black producing 1.08-kg CO₂e, the reduced carbon footprint will be 0.812 (24.81%), 0.547 (49.35%), 0.28 (74.07%), and 0.0128-kg CO₂e (98.81%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. From our analysis, graphene replacing carbon black can reduce carbon footprint. This has not been published previously and provides a direction for the tire plant to save carbon emissions.     

常温下粉碎废旧轮胎的研究

利用自行开发的研磨机对废旧轮胎进行常温粉碎实验 ,结果表明 :本装置完全适合常温下用废旧轮胎制取胶粉 ,通过改变操作参数可以得到不同粒度的胶粉。为胶粉的制造方法开辟了新的途径