常温酸性腐蚀对热障涂层性能的影响

采用酸性盐雾腐蚀试验对物理气相沉积法制备的热障涂层进行了常温腐蚀,研究了常温酸性盐雾腐蚀对热障涂层的微观形貌以及高温性能的影响.试验结果表明：常温酸性腐蚀使热障涂层表面变得粗糙不平,产生了较大的裂纹.经过150次高温循环氧化后,顶层氧化锆晶粒排列疏松,裂纹进一步扩展,中间层--粘结层氧化速度加快,生成了疏松的TGO层.TGO的体积膨胀效应使得陶瓷/粘结层界面结合力降低,缩短了涂层的使用寿命.     

基于模糊评价法的建筑安全事故预测模型

针对建筑工程安全领域中许多对象具有"内涵明确,外延不明确"的特点,本文利用模糊数学对建筑安全事故影响因素进行度量,通过层次分析法确定各影响因素权重,提出了一种基于模糊评价法的建筑安全事故预测模型,解决了建筑生产中安全事故的即时预测,并通过实例给予说明,说明了模型在建筑安全事故预测中的有效性和实用性.     

CTMAB增强调控沉积物(生物膜)吸附BPA的作用

研究了经十二烷基苯磺酸钠(SDBS]、曲拉通(TX-100)和十六烷基三甲基溴化铵(CTMAB)改性前后的沉积物(生物膜)吸附双酚A(BPA)的能力,并分析了CTMAB在沉积物(生物膜)吸附BPA过程中的增强机理及表面吸附和分配作用在总吸附中的贡献.研究结果表明,三种表面活性剂对沉积物(生物膜)吸附BPA的促进作用大小...     

涪陵页岩气田钻井岩屑资源化利用实践

总结了涪陵页岩气田开发初期钻井岩屑采用固化填埋方式处置存在占地面积大且易产生二次污染隐患等问题,因地制宜地探索钻井岩屑的资源化利用。分析了水基岩屑随钻预处理和油基岩屑热脱附技术,结合钻井岩屑的理化性质,开展了水基岩屑脱水后干渣制路基材料、制砖及水泥窑协同处置,油基岩屑灰渣制混凝土、制砖及水泥窑协同处置的探索和实践,基于环境安全、技术稳定可靠、消纳量大的原则,最终形成了涪陵页岩气田钻井岩屑资源化方案:水基岩屑"随钻预处理、水泥窑协同处置",油基岩屑"热脱附、水泥窑协同处置",实现了钻井岩屑的资源化综合利用。     

等离子喷涂耐高温抗氧化涂层的研究进展

利用等离子喷涂技术在工件表面制备抗高温氧化涂层,能显著提高工件的抗氧化性能。综述了目前国内外抗高温氧化涂层和热障涂层的研究现状。详细介绍了金属间化合物和MCrA lY两种耐高温抗氧化涂层的组织性能及其抗氧化原理。阐述了影响热障涂层性能的3种主要因素,分析了热障涂层由于热生长氧化层(TGO)的存在而引起的失效机制。指出了等离子喷涂制备耐高温抗氧化涂层存在的主要问题,并提出了几种解决思路,展望了等离子喷涂制备抗氧化涂层的应用前景。     

Evaluating soundscape intentions in landscape architecture: a study of competition entries for a new cemetery in Järva,Stockholm

While soundscape is increasingly acknowledged within landscape planning and design discourse, there is little research that clarifies how soundscapes are actually dealt with in landscape architecture practice – partly owing to methodological insufficiencies. This paper, therefore, describes a model for evaluating soundscape treatment in landscape design proposals, focusing on three key aspects. With the dual aim of testing the model, and learning more about how soundscape is approached in practice, the paper spotlights a major design competition for a new cemetery in Sweden. The model proved fruitful and easy to apply. It showed that only limited attention was paid to soundscape in the competition as a whole, and was a useful means of pinpointing proposals where soundscape was fully considered as a design feature; one competition entry that did so is described in the paper. Discussions cover design practice, trends in the competition and model application.     

A BASIS FOR ASSESSING DIFFERENTIAL PARTICIPATION IN WATER-BASED RECREATION1

ABSTRACT: Participation in water-based recreation activities does not arise in random fashion nor simply as a result of having a water resource immediately available. Neither do individuals and groups engage in the same activities or a specific activity in the same way. The purpose of the present paper is to describe an alternative framework whereby differences among recreation users can be identified. Prior to this time, research directed toward understanding participation patterns at a recreational site have emphasized the activities while ignoring the human behavior factors which determine how participation arises. People consider recreation sites to be leisure settings in which the definition of such places has a broader socio-cultural meaning than that the site was designed. These definitions are reflected within the context of the social group and can be observed in the subsequent orientation to leisure and play. When activities are considered in the context of a human group, differences in participation patterns can be discovered.     

物理气相沉积硬质耐腐蚀磨损防护涂层研究进展

叙述了用物理气相沉积技术制备的硬质耐腐蚀磨损防护涂层的研究进展。重点介绍了腐蚀磨损耦合工况特性和作用机理,单元、多元掺杂氮化物涂层,高熵氮化物涂层,多层、纳米多层、纳米复合、梯度氮化物涂层耐腐蚀磨损性能研究,非金属元素/金属元素掺杂DLC涂层、多层复合DLC涂层耐腐蚀磨损性能研究,并对涂层改性、强化机理和腐蚀磨损失效机制进行了总结。最后,提出了未来物理气相沉积硬质耐腐蚀磨损防护涂层重点发展的方向,应重点发展涂层组元/结构设计、力–电耦合损伤机理研究、高效率研发设计、涂层先进制备装备与评估体系等方面的能力。     

热障涂层对DD6单晶高温合金高周疲劳性能的影响

目的研究电子束物理气相沉积热障涂层对单晶高温合金高周疲劳性能的影响,为热障涂层在涡轮叶片上的应用提供技术支持。方法采用真空电弧镀和电子束物理气相沉积工艺制备YSZ热障涂层,进行900℃条件下高周疲劳性能测试,采用扫描电镜对测试后的试样表面、断口形貌进行观察与分析。结果在900℃、380 MPa条件下,带涂层的DD6单晶试棒循环次数(Nf)超过了107,420 MPa条件下超过了106。通过对DD6单晶试棒断口分析,失效后的带涂层试棒仍以DD6单晶常见滑移解离形式发生破坏。结论高周疲劳性能测试条件下,带YSZ热障涂层的试棒中粘结层率先产生垂直微裂纹,但是裂纹扩展延伸中发生氧化钝化,之后DD6基体沿正常的滑移方向从表面向内部疲劳扩展,带涂层的试棒疲劳裂纹并非由涂层微裂纹直接扩展形成,热障涂层对DD6单晶高温合金高周疲劳性能影响较小。     

干湿交替频率对有机涂层失效过程的影响

目的研究干湿交替频率对有机涂层失效过程的影响。方法应用电化学阻抗谱技术,结合浸泡过程中涂层表面以及基底金属的形貌变化,对比研究高频率干湿交替环境和低频率干湿交替环境下,浸泡初期、浸泡中期、浸泡末期有机涂层的失效过程及特征。结果高频率干湿交替环境下,涂层在浸泡初期、中期、末期所经历的时长分别为13、2、5d,而低频干湿交替环境下,涂层在浸泡初期、中期、末期所经历的时长分别为18、4、46 d。对比来看,高频率干湿交替显著缩短了浸泡后期的时长,加速涂层失效过程。此外,高频干湿交替使涂层起泡位置分布均匀,基底金属均匀腐蚀,这与低频干湿交替环境恰好相反。结论高频率干湿交替环境下,涂层失效较快,涂层剥离及基底金属腐蚀较均匀。