Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Quantum chemical investigation on photodegradation mechanisms of sulfamethoxypyridazine with dissolved inorganic matter and hydroxyl radical

Sulfamethoxypyridazine(SMP) is one of the commonly used sulfonamide antibiotics(SAs).SAs are mainly studied to undergo triplet-sensitized photodegradation in water under natural sunlight with other coexisting aquatic environmental organic pollutants.In this work,SMP was selected as a representative of SAs.We studied the mechanisms of triplet-sensitized photodegradation of SMP and the influence of selected dissolved inorganic matter,i.e.,anions(Br~-,Cl~-,and NO~-_3) and cations ions(Ca~(2+),Mg~(2+),and Zn~(2+)) on SMP photodegradation mechanism by quantum chemical methods.In addition,the degradation mechanisms of SMP by hydroxyl radical(OH·) were also investigated.The creation of SO_2 extrusion product was accessed with two different energy pathways(pathway-1 and pathway-2) by following two steps(step-I and step-II) in the tripletsensitized photodegradation of SMP.Due to low activation energy,the pathway-1 was considered as the main pathway to obtain SO_2 extrusion product.Step-II of pathway-1 was measured to be the rate-limiting step(RLS) of SMP photodegradation mechanism and the effect of the selected anions and cations was estimated for this step.All selected anions and cations promoted photodegradation of SMP by dropping the activation energy of pathway-1.The estimated low activation energies of different degradation pathways of SMP with OH·radical indicate that OH·radical is a very powerful oxidizing agent for SMP degradation via attack through benzene derivative and pyridazine derivative ring.     

Steam reforming of glycerol for syngas generation under cold plasma conditions: A DFT study

Density functional theory (DFT) has been used to investigate the reaction pathways with steam reforming of glycerol under cold plasma conditions. Total energies, energy barriers, and reaction enthalpies at 298.15 K have been calculated at the GGA/PW91/DNP level. The calculation shows that, with the presence of steam, the energy barrier of glycerol conversion is reduced and the conversion from glycerol to H₂ and CO is promoted under cold plasma conditions. The formation of syngas was through a multi-step pathway via the conversion of OHCH₂CHOH, CH₂OH, CH₂O, HCO,·and CH₃, while the recombination of H generated extra H₂. The synthesis of hydrocarbons are from the recombination of·CH₃,·CH₂, and·CH, which could be primarily generated through glycerol dissociation. The structure of glycerol anion was also studied in this work, and it was less stable than the neutral molecule. The route for the formation of OHCH₂CHOH·and CH₂OH·from glycerol anion is thermodynamically favorable.     

A DFT study of the reactions of O3 with Hg° or Br

In the mid 1980s the study of ozone reactivity gained a significant interest with the discoveries of the stratospheric ozone hole (Farman et al., 1985) and of the ozone depletion events in the polar boundary layer (Oltmans et al., 1989). In the stratosphere, the mechanism involves heterogeneous reactions on polar stratospheric clouds that lead to chlorine activation (Solomon et al., 1986). In contrast, tropospheric ozone depletion occurring during polar springtime rather involves reactive bromine species. They are released during a series of photochemical and heterogeneous reactions often called the bromine explosion (see the review of Simpson et al., 2007). In this reaction sequence, an essential step is the generation of photolyzable Br₂, the precursor of two Br atoms, via the multiphasic reaction (1):

(1)

HOBr + Br⁻ + H⁺ → H₂O + Br₂

The production of reactive HOBr could occur with the oxidation of BrO by HO₂.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

The thermal transformation mechanism of chlorinated paraffins: An experimental and density functional theory study

The increasing production and usage of chlorinated paraffins(CPs) correspondently increase the amount of CPs that experience thermal processes. Our previous study revealed that a significant amount of medium-chain chlorinated paraffins(MCCPs), short-chain chlorinated paraffins(SCCPs) as well as aromatic and chlorinated polycyclic aromatic hydrocarbons(Cl-PAHs) were formed synergistically during the thermal decomposition of CP-52(a class of CP products).However, the transformation mechanisms of CP-52 to these compounds are still not very clear.This article presents a mechanistic analysis on the decomposition of CP-52 experimentally and theoretically. It was found that CP-52 initially undergoes dehydrochlorination and carbon chain cleavage and it transformed into chlorinated and unsaturated hydrocarbons. Cyclization and aromatization were the most accessible pathways at low temperatures(200–400°C), both of which produce mostly aromatic hydrocarbons. As the temperature exceeds 400°C, the hydrocarbons could decompose into small molecules, and the subsequent radical-induced reactions become the predominant pathways, leading to the formation of Cl-PAHs. The decomposition of CP-52 was investigated by using density functional theory and calculations demonstrating the feasibility and rationality of PCB and PCN formation from chlorobenzene. The results improve the understanding of the transformation processes from CP-52 to SCCPs and Cl-PAHs as well as provide data for reducing their emissions during thermal-related processes.     

Potassium carbonate-based ternary transition temperature mixture (deep eutectic analogues) for CO2 absorption: Characterizations and DFT analysis

•Addition of hindered amine increased thermal stability and viscosity of TTTM. •Addition of hindered amine improved the CO₂ absorption performance of TTTM. •Good the CO₂ absorption of recycled solvents after two regenerations. •Important role of amine group in CO₂ absorption of TTTM confirmed by DFT analysis. Is it possible to improve CO₂ solubility in potassium carbonate (K₂CO₃)-based transition temperature mixtures (TTMs)? To assess this possibility, a ternary transition-temperature mixture (TTTM) was prepared by using a hindered amine, 2-amino-2-methyl-1,3-propanediol (AMPD). Fourier transform infrared spectroscopy (FT-IR) was employed to detect the functional groups including hydroxyl, amine, carbonate ion, and aliphatic functional groups in the prepared solvents. From thermogravimetric analysis (TGA), it was found that the addition of AMPD to the binary mixture can increase the thermal stability of TTTM. The viscosity findings showed that TTTM has a higher viscosity than TTM while their difference was decreased by increasing temperature. In addition, Eyring’s absolute rate theory was used to compute the activation parameters (ΔG*, ΔH*, and ΔS*). The CO₂ solubility in liquids was measured at a temperature of 303.15 K and pressures up to 1.8 MPa. The results disclosed that the CO₂ solubility of TTTM was improved by the addition of AMPD. At the pressure of about 1.8 MPa, the CO₂ mole fractions of TTM and TTTM were 0.1697 and 0.2022, respectively. To confirm the experimental data, density functional theory (DFT) was employed. From the DFT analysis, it was found that the TTTM+ CO₂ system has higher interaction energy (|ΔE |) than the TTM+ CO₂ system indicating the higher CO₂ affinity of the former system. This study might help scientists to better understand and to improve CO₂ solubility in these types of solvents by choosing a suitable amine as HBD and finding the best combination of HBA and HBD.     

硝基苯气相氟代脱硝反应热安全性的理论研究

为研究硝基苯气相氟代脱硝反应的热安全性,采用Gaussian98软件,运用密度泛函理论(DFT)B3LYP,在6-31G(D)基组水平上,全优化计算气相条件下氟离子对硝基苯进攻的氟代脱硝反应的微观机理,得到反应路径并通过IRC验证,并对反应过程中反应物,各中间体、过渡态、产物进行分子几何构型优化,标准热力学函数计算。理论计算研究表明:该反应属于SN2亲核取代反应;反应能垒较低,反应所需能量可以从过程R→IM1和TS3→P所释放的能量(279.06 kJ/mol,143.34 kJ/mol)中获得;与席曼反应相比较,该反应速率下降3个数量级,热安全性更高,符合化工工程设计的本质安全化要求,具有广阔的应用前景。     

羟基化石墨烯氧化NO脱硝反应机理研究

石墨烯氧化物(GO)通常是羟基化石墨烯(Hy G)和羧基化石墨烯(Cy G)负载金属或金属氧化物,作为催化剂可以有效地催化烟气脱硝,对环境保护具有重要意义.本文采用密度泛函理论(DFT)计算来评估Hy G与NO之间的相互作用,以揭示Hy G的氧化活性.首先基于5×5×1、6×6×1、7×7×1、8×8×1和9×9×1周期性石墨烯超晶胞中的碳空位能和OH—结合能来优选Hy G模型,并对优化后的Hy G的电子特性(包括前沿轨道、状态密度)进行研究.进而通过NO和Hy G之间的相互作用,揭示Hy G氧化NO的反应机理,并利用过渡态理论估算关键步骤的速率常数,进行动力学建模以确定羟基化石墨烯氧化NO脱硝反应特性.研究结果表明,无缺陷的羟基化石墨烯氧化NO的活性高于有缺陷的羟基化石墨烯,这为GO基催化材料的设计提供了理论指导.