A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

中国“四化”建设对水足迹强度的影响分析

采用2000—2016年中国30省市（不包括香港、澳门、台湾、西藏四省区）的数据,构建四化指标体系,计算四化发展指数,进行地区四化水平评价,通过OLS和GMM回归模型考察四化发展对水足迹强度的影响,同时设置四化之间的交互项来识别四化指标之间的相互作用。主要结论如下：首先,从四化水平的地域发展差异上来看,中国四化水平总体上呈现出东部优于中部、中部优于西部的格局,水足迹强度的分布与之类似,说明四化水平发展与水足迹强度之间可能存在相关关系;其次,计量模型显示四化水平的提升对于水足迹强度的改善有积极影响,但每一化对于水足迹强度改善的影响大小不一;第三,以交互项衡量的四化相互作用对于水足迹强度的影响作用为正,表明四化发展对水足迹强度的改善效果逐渐趋于收敛。因此,优先提升落后地区的四化水平,以四化水平的提升推动水足迹强度的降低,能够有效降低我国总体水足迹强度水平。     

爆炸螺栓分离对热防护系统冲击响应分析

目的考察在爆炸螺栓分离过程中,作用在TPS(热防护系统)上的冲击响应是否会导致其破坏,从而影响航天器飞行安全,对过程进行数值仿真分析。方法提出四阶段仿真方案,基于MSC.Dytran软件,采用流固耦合方法对爆炸螺栓分离过程进行动力学仿真;根据单个爆炸螺栓地面分离试验的结构进行建模和分析,获取结构响应曲线;再根据实测的冲击响应数据,对爆炸过程中炸药及JWL方程的参数等设置进行调整,获取准确爆炸螺栓的分析模型;最后应用于对真实结构中TPS(热防护系统)在分离过程里受爆炸螺栓冲击响应的动力学分析与评估。结果通过参数调整,获得的仿真模型与爆炸螺栓地面分离试验实测结果一致,证明了仿真模型的有效性和四阶段仿真方案的可行性。结论提取的真实结构爆炸螺栓分离过程中作用在TPS(热防护结构)上的最大加速度响应曲线,可用于指导TPS(热防护系统)的设计。     

清洁生产工艺在造纸工业中的应用

介绍了清洁生产这个新概念,清洁生产工艺在造纸工业中的应用,实例表明:造纸废水再循环,不准能节约水资源,节约能源,防止环境污染,而且可以取得良好的经济效益和社会效益,为造纸废水在2000 年前达到国家排准排放奠定了良好基础     

SBR工艺处理城市垃圾渗滤液的可行性分析

在参考国内外垃圾渗滤液的处理方案后，选择厌氧预处理 SBR工艺作为处理方案，通过实验对该废水处理的情况来看，该工艺较好地适应了垃圾渗滤液的处理特点，能达到比较良好的效果。     

The curve of ion exchange ratio(%)-pH of the interaction between suspended particles with Cd(II) in the Yellow River

The curve of ion exchange ratio(%)-pH of the interactionbetween suspended particles with Cd(II) in the Yellow River wasstudied. The effects of lysine on this curve have been alsoinvestigated. The results showed that (1) Cadmium in Cd(OH)+ formin the suspended particles exchanges with the cations.The exchangeratio of Cd2+ is nearly at its greatest value in the range of pH(8.0-8.5) in natural aquatic system; (2) Ion exchange ratiodecreases as the concentration of Cd2+ raises from 8.9×10-6 mol/L to 2x8.9 x 10-6mol/L; (3) At the lysine concentration of 6.8x10-6 mol/L, it can promote the ion exchange ratio; (4) Adsorption of thesuspended particles to cadmium is weaker in seawater and Jin ShaRiver than in the Yellow River.     

金陵石化炼油厂第二污水处理场改造工程介绍

金陵石化炼油厂第二污水处理场改造工程中对原有处理设施进行了工艺调整和优化，采用了均质，二级好氧生物处理及后浮选工艺，工程运行结果表明所采用的技术、设备是合理有效的。     

活性污泥外循环SBR系统循环污泥释磷能力研究

本试验以HAc作为厌氧释磷的碳源有机物，以SBR系统外循环污泥作为研究对象，探索外循环活性污泥的厌氧释磷能力和获取高浓度富磷污水的途径，试验表明：厌氧过程中聚磷菌吸收HAc和释放PO4^3 的分子比为1：1。即吸收2．06mgHAc-COD将诱导1mgP释放，单位时段比污泥的平均释磷速率Vp=6.54.t^0.76，理想的厌氧时间为60－180min，减少循环污泥释磷系统的反应容积可以提高富磷污水磷酸盐的浓度。     

水解酸化—SBR法处理乳品废水的工程应用

介绍了应用SBR法处理乳品废水的工程实例。利用SBR工艺处理乳品废水的特点是工艺简单、占地面积小、运转费用低、管理方便、出水稳定。当进水CODCr2 0 0 0～ 2 5 0 0mg/L之间 ,出水可以达到国家《污水综合排放标准》(GB8978- 1996 )中的一级标准 ,CODCr≤ 10 0mg/L。