阀门泄漏的原因分析及其设计选型的优化

通过分析各种阀门发生泄漏的原因，以及阀门泄漏对环境和生产所带来的危害，提出在工程设计中的优化阀门选型建议。     

Long-term survey of heavy-metal pollution, biofilm contamination and diatom community structure in the Riou Mort watershed, South-West France

In a metal-polluted stream in the Riou Mort watershed in SW France, periphytic biofilm was analyzed for diatom cell densities and taxonomic composition, dry weight and metal bio-accumulation (cadmium and zinc). Periphytic diatom communities were affected by the metal but displayed induced tolerance, seen through structural impact (dominance of small, adnate species) as well as morphological abnormalities particularly in the genera Ulnaria and Fragilaria. Species assemblages were characterized by taxa known to occur in metal-polluted environments, and shifts in the community structure expressed seasonal patterns: high numbers of Eolimna minima, Nitzschia palea and Pinnularia parvulissima were recorded in Summer and Autumn, whereas the species Surirella brebissonii, Achnanthidium minutissimum, Navicula lanceolata and Surirella angusta were dominant in Winter and Spring. Commonly used indices such as the Shannon diversity index and Specific Pollution Sensitivity Index reflected the level of pollution and suggest seasonal periodicity, the lowest diversities being observed in Summer.     

Relationship between filtration activity and food availability in the Mediterranean mussel <Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis>

The filtration activity of the Mediterranean mussel, Mytilus galloprovincialis, was assessed under different concentrations and compositions of seston by using a new automated image acquisition and analysis system. This approach allowed for frequent and simultaneous measurements of valve gape and exhalant siphon area. Filtration rates were measured through clearance measurements whereas pumping rates were measured using hot-film probes. The average filtration rate (17.5 l g h⁻¹ DW⁻¹ for a 0.36 g DW mussel) recorded during the present study was higher than those available for Mytilus edulis when standardized to flesh dry weight but almost equivalent (17.5 l h⁻¹ g DW⁻¹ for a 53 mm shell length mussel) to those rates when standardized to shell length. Immediately after the addition of algal cells (Isochrysis galbana; 4.5 μm in size), valve gape, exhalant siphon area and filtration rate increased quickly as mussels reached their maximum filtration activity. These three parameters then gradually decreased until complete closure of the shell. The algal cell concentration inducing this transition was close to 800 cells ml⁻¹ and 0.5 μg Chl a l⁻¹. When algal concentration was maintained above this threshold by successive algal additions, both valve gape and exhalant siphon area remained maximal. Temporal changes in the exhalant siphon area were continuous as opposed to those of valve gape. Therefore, despite the significant correlation between these two parameters, valves and siphon were sometimes dissociated due to a reduction of the area or even a closure of the exhalant siphon while the valves remained open. The velocity of exhaled water tended to be constant irrespective of exhalant siphon area and thus pumping rates were a linear function of exhalant siphon area. Consequently, reductions in exhalant siphon area and pumping rate were almost similar in M. galloprovincialis. Our results thus clearly support the hypothesis that exhalant siphon area constitutes a better proxy of pumping rate than valve gape as already suggested for Mytilus edulis. Finally, the high filtration rates measured during the present study together with the high concentrations of inorganic matter (> 40 mg DW l⁻¹) requested to alter those rates suggest that the studied mussels were well adapted to oligotrophic waters featuring strong hydrodynamism and frequent sediment resuspension events.     

阀门泄漏对环境污染的影响

通过对阀门泄漏这一环节的分析，提出改进意见。     

Comparison of the droplet size spectra produced by rotary atomizers and hydraulic nozzles under simulated aerial application conditions

Abstract

A wind tunnel was used to characterize the droplet size spectra of liquid sprays from several different atomizers and nozzles used under simulated aerial application conditions. The atomizers included a D8–46 nozzle, a Through Valve Boom (TVB) nozzle, and rotary cage and drum atomizers.

The D8–46 hydraulic nozzle was evaluated, using water, at orientations of 0, 10, 20, 30, 40, 50, 60, 70, 80 and 90° relative to 145 and 180 km/h airstreams. The TVB nozzle was evaluated using water, water with isopropyl alcohol, and water with a non‐ionic surfactant at airstream velocities between 130 and 180 km/h. The rotary atomizers were evaluated at different rotation rates, flow rates of water and an insecticide, in 130 and 180 km/h airstreams.

The volumetric droplet size spectra parameters (D_vo.x) decreased as the angle of the D8–46 nozzle and the airstream velocity increased. Empirical models were developed to predict these values for different windspeed and nozzle angle conditions. The TVB nozzle produced larger droplets than the other atomizers under similar conditions, with a decrease in the D_vo.x parameter values as the airstream velocity increased.

The D_vo.x parameter values produced by the rotary atomizers increased as the liquid flow rate increased, and as the rotation rate and airstream velocity decreased, and were lower for the insecticide than for water. The slotted rotary drum atomizer gave the best control over droplet size, generally producing mono‐modal droplet size spectra where the other atomizers often produced bi‐ and multimodal spectra.     

Sizing of safety valves for multi-purpose plants according to ISO 4126-10

Multi-purpose plants are frequently protected with mechanical safety devices like safety valves or bursting disks. Due to many changes of recipes it must be checked regularly whether the safety devices are sufficiently sized. But the sizing procedure of individual safety devices can be very tedious. Therefore energy specific relief areas (effective relief area per kW of energy input) have been determined for approx. 60 typical solvents. They are indicated for reactors with safety devices which have a set pressure of 7 bar (abs) or 11 bar (abs). These values are independent of the size of the reactors for vaporizing systems and arbitrary safety valves. The energy specific relief areas allow the minimum required relief area quickly to recalculate if the energy input of the reactor is known. In addition, the application of solvents in multi-purpose plants can be evaluated from a safety point of few.The energy specific relief areas are calculated based on a relief of two-phase gas/liquid mixtures. The data have been determined with the non-equilibrium HNE-DS method, which takes into account the boiling delay of the liquid in the safety device and the slip between gases and liquids. The method is recommended in the international standard ISO 4126 part 10. In addition, practical advice and possible improvements are outlined. The method leads to significantly smaller relief areas than according to the API 520. For multi-purpose plants with available safety devices this method allows for a considerable expansion of the application range of reactors.     

Chlorine leakage from bonnet of a valve in a bullet—a case study

This paper deals with the accidental release of chlorine from bonnet of a valve in a bullet installed in a chloro-alkali industry, and the probable causes of the accident and the ensuing sequence of events. Emergency procedures are also discussed. Finally, in the conclusions reached at some useful recommendations, which has been drawn for industrial facilities handling chlorine.