Nest-building by crested tit Parus cristatus males: an analysis of costs and benefits

In a population of crested tits in Belgium, one out of three breeding males participated in nest-building. Since variation in the amount of nest-building among 11 building males was low, analysis of male nest-building allowed a logistic regression design. The probability of building increased with male condition and for late nests. The effect of male condition decreased with date, and date was the only factor predicting nest-building for repeat broods. The effect of male condition on nest-building suggests that building entails important costs for males. Based on correlative data, we argue that building by males shortens the interval between the start of nest-building and the onset of egg-laying by about 5 days. Since clutch size, incubation and nestling time did not differ between early and late broods, male nest-building apparently affects fledging date. Since early fledgers (early dispersers) are more likely to settle in future winter flocks, building behaviour by crested tit males should be favoured by natural selection. So far, male nest-building in hole-breeding birds might have been overlooked due to the widespread use of artificial nest-boxes in behavioural studies.     

焦化废水处理过程中固相物质的形成及处置方法评价

焦化废水处理过程中产生的焦油、污泥和结晶杂盐等固相物质,既有资源属性,又有污染特性,但目前缺乏基于能源、经济及环境影响方面的评估.本研究阐述了3类固相物质的形成机制,建立了质量当量计算及处置方法评价模型.以宝武集团韶关钢铁股份有限公司焦化厂（二期）焦化废水处理工程的A/O/H/O（厌氧/好氧/水解/好氧）流化床工艺作为考察对象,利用工程运行参数和水质统计数据进行固相物质的产量推算,结果发现,焦油、物化污泥、生物污泥（含水率为80%）和工业杂盐的产率分别为0.186、5.80、4.24和1.97 kg·m^-3.通过处置方法评价模型明确了焦油焚烧、污泥热解、结晶杂盐分盐提纯后工业应用是最佳处置方案,在60 m³·h^-1废水处理规模的固相物质处置过程中,每年约产生1177 MWh的能源,获得135.0万元的经济效益,排放627.0 t CO₂,表明能源回收、经济效益和环境影响的协同存在.     

铝系混凝剂优势形态分析及其混凝特性

聚合氯化铝（PACl）是常用的水处理混凝剂,在应用过程中通常表现出比传统铝盐更为优异的效果.研究表明,这种优异性能主要得益于其特殊的组成,特别是高分子聚合物Al₁₃和Al₃₀独特的物化特性.Al₁₃和Al₃₀是铝离子水解过程中的中间产物,在地球科学和环境化学等领域有着重要的研究价值.于水处理而言,二者的结构和分子特性是研究者关注的重点,大量研究基于此展开,很多重要的发现为实际应用奠定了基础.基于对PACl及其组成性质的研究,本文对PACl的混凝特性及其优势形态分子的分析进行了综合阐述.     

AMD铁絮体改性生物炭对重金属吸附机理研究 ——以Pb(II)为例

以酸性矿山废水生成的铁絮体和秸秆生物炭为原料,采用化学改性和紫外辐射联用技术制备改性生物炭,并通过正交试验确定最佳改性条件,同时利用FTIR、SEM和BET等方法对吸附材料的形貌特征、孔隙结构及其表面化学性质进行表征.结果表明,通过改性使吸附材料比表面积增大,吸附位点增多,在25℃、pH为7时,吸附材料改性后比表面积为295.71 m²·g^-1,对Pb（II）的拟合吸附量可达278 mg·g^-1.改性材料对Pb（II）的吸附过程符合Langmuir吸附等温线模型和准二级动力学模型,主要为单分子层吸附,受化学吸附控制.     

Investigation of chlorinated phenols sorption mechanisms on different layers of the Danube alluvial sediment

The characteristics of the Danube river alluvial sediment are of great importance in assessing the risk for transport of pollutants to drinking water sources. Characterization of the sediment column layers has shown that the alluvial sediment, sampled near the city of Novi Sad, is a mesoporous sandy material with certain differences in the properties of individual layers. In order to investigate the sorption mechanisms of four chlorinated phenols (CPs) on the alluvial deposit, static sorption experiments were performed at pH 4, 7 and 10. The results of sorption experiments, confirmed by principal components analysis sugest different mechanisms govern the sorption process at different pH conditions. This can be attributed to the molecular characteristics of CPs, geosorbent properties and to variations in the surface charge of the sorbent at different pH conditions.     

GHG emission reductions and costs to achieve Kyoto target

Emission projection and marginal abatement cost curves (MACs) are the central components of any assessment of future carbonmarket, such as CDM (clean development mechanism) potentials, carbon quota price etc. However, they are products of very complex,dynamic systems driven by forces like population growth, economic development, resource endowments, technology progress and so on. The modeling approaches for emission projection and MACs evaluation were summarized, and some major models and their results were compared.Accordingly, reduction and cost requirements to achieve the Kyoto target were estimated. It is concluded that Annex I Parties‘ total reduction requirements range from 503--1304 MtC with USA participation and decrease significantly to 140--612 MtC after USA‘ s withdrawal. Total costs vary from 21--77 BUSD with USA and from 5--36 BUSD without USA if only domestic reduction actions are taken. The costs would sharply reduce while considering the three flexible mechanisms defined in the Kyoto Protocol with domestic actions‘ share in the all mitigation strategies drons to only 0--16%.     

硫代磷酸二乙酯加热水解的研究

在二升高压釜中,氮气氛条件下研究了有机磷农药废水的主要污染物质——硫代磷酸二乙酯(浓度为100ppm)的水解动力学.运用气相色谱法,在pH2—4,温度140—190℃范围,得到不同条件下的一级反应速率常数k,获得pH、温度与反应速率常数的关系,并对硫化磷酸二乙酯的水解条件进行了讨论.     

水解酸化─厌氧─好氧─混凝─吸附工艺处理洁霉素生产丁提高浓度有机废水

采用水解酸化厌氧好氧混凝吸附工艺处理洁霉素生产丁提高浓度有机废水，工程实践表明，ＣＯＤＣｒ和ＢＯＤ５去除率在９９％以上，所排废水各项指标达到国家排放标准。     

Hydrolytic dynamics of pesticide N''-(2,4-dimethylphenyl) -N-methylformamidine in aquatic solution

ＨｙｄｒｏｌｙｔｉｃｄｙｎａｍｉｃｓｏｆｐｅｓｔｉｃｉｄｅＮ＇－（２，４－ｄｉｍｅｔｈｙｌｐｈｅｎｙｌ）－Ｎ－ｍｅｔｈｙｌｆｏｒｍａｍｉｄｉｎｅｉｎａｑｕａｔｉｃｓｏｌｕｔｉｏｎ￥ＭｏＨａｎｈｏｎｇ；ＹａｎｇＫｅｗｕ；ＡｎＦｅｎｇｃｈｕｎ；ＬｉｕＹｅ...     

含纤维素废水生物水解的应用研究

提取植物或动物纤维所产生的高浓有机废水，含短小纤维、木质素、纤维素、半纤维素、蜡质、果胶及其分解产物(糖、脂肪酸、醇等)，较难生物处理，属含纤维素废水。试验研究和生产应用表明，生物水解对含纤维素废水中高分子有机物，可予分解并提高度水可生化性：在常温、PH约9．5时，水解池污泥浓度达6．5～16．0g/L，容积负荷达2．9kgCOD／m^3．d，COD去除率为24—36％，VFA提高3．9—5．1倍，BOD／COD提高12～16％。分析认为：中温、酸性，纤维素、木素含量低时，水解效果应更好。