模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

Feasibility of honeycomb monolith supported sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD)

Carbon coated monolith was prepared by sucrose solution 65 wt.% via dip-coating method. Sulfonation of incomplete carbonized carbon coated monolith was carried out in order to synthesize solid acid catalyst. The textural structure characteristics of the solid acid catalyst demonstrated a low surface area and pore volume. Palm fatty acid distillate (PFAD), a by-product of palm oil refineries, was utilized as oil source in biodiesel production. The esterification reaction subjected to different reaction conditions was performed by using the sulfonated carbon coated monolith as heterogeneous catalyst. The sulfonation process had been performed by using vapour of concentrated H₂SO₄ that was much easier and efficient than liquid phase sulfonation. Total acidity value of carbon coated monolith was measured for unsulfonated sample (0.5 mmol/g) and sulfonated sample (4.2 mmol/g). The effect of methanol/oil ratio, catalyst amount and reaction time were examined. The maximum methyl ester content was 89% at the optimum condition, i.e. methanol/oil molar ratio (15:1), catalyst amount (2.5 wt.% with respect to PFAD), reaction time (240 min) and temperature 80 °C. The sugar catalyst supported on the honeycomb monolith showed comparable reactivity compared with the sugar catalyst powder. However, the catalyst reusability studies showed decrease in FFA% conversion from 95.3% to 68.8% after four cycles as well as the total acidity of catalyst dropped from the value 4.2 to 3.1 mmol/g during these cycles. This might be likely due to the leaching out of SO₃H group from the sulfonated carbon coated monolith surface. The leaching of active species reached a plateau state after fourth cycle.     

The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

复合氧化物汽车尾气净化催化剂抗SO2中毒机理研究

复合氧化物催化剂(ASC)具有较高的活性和良好的抗SO_2中毒性能.用IR、XPS、TPD等技术研究了该催化剂抗SO_2中毒机理,结果表明,与易失活催化剂相比,ASC经500h反应(反应气含SO_2约20ppm),其活性组分价态无显著变化,仅表面发生SO_2的化学吸附,经与约500ppm的SO_2作用20h后,发现仅有少量SO_4~(2-)形成.这是由于在ASC催化剂中添加了特殊助剂,而使催化剂活性组分得到保护的缘故.     

故障安全控制系统在催化裂化装置的应用

介绍霍尼韦尔公司故障安全控制系统FSC的技术特点以及在我厂重油催化裂化装置的应用情况，说明了该装置故障安全控制系统组成和操作界面，并总结了应用效果。     

用于燃料电池的甲醇水蒸气重整反应制氢的研究

研究了甲醇水蒸气重整制氢反应过程中各种因素对Cu／ZnO／Al2O3催化剂的活性和选择性的影响。结果表明：Cu／Zn比为2．0的催化剂在250℃反应时，催化剂效果较好，最合适反应条件是：压力0．1MPa，温度250℃，n(H2O)：n(CH3OH)=1．0-1．2，液体流速0．1mL／min。在Cu／ZnO／Al2O3)，催化剂上，甲醇水蒸气重整、甲醇分解和水气转换反应随反应条件的不同而发生相互抑制或促进作用。     

车用三效催化剂的研究进展

三效催化剂是机外治理机动车尾气污染最常采用的有效方法，车用三效催化剂已发展到第4代。目前车用三效催化剂的研究主要集中在：开发稀燃型三效催化剂和紧耦合三效催化剂及发展三效催化剂低温冷起燃技术等。国内应以稀土添加少量贵金属的三效催化剂为主要研究方向，开发适合我国现状的车用净化催化剂技术。     

焦化黄血盐吸收塔填料自燃原因分析

焦化黄血盐系统内的吸收塔在停产检修补充填料——铁刨花期间，经常发生铁刨花自燃现象，这是严重的事故隐患。结合武钢焦化公司黄血盐工艺特点，对其自燃原因作了详细分析，提出了避免此类事故发生的措施。     

生物法合成纳米铁的研究进展

纳米铁颗粒的制备技术发展迅速,方法多种多样。生物法因其具有原料来源广,反应条件温和,产物纳米级颗粒不易团聚,以及有毒副产物少等特点,成为学者们争相研究的对象。对近几年国内外采用微生物、植物提取物等合成纳米铁材料的方法及机理进行了阐述,综述了纳米铁在环保领域的应用,并对今后深入研究生物法合成纳米铁的前景进行了展望。     

树脂基纳米零价铁复合材料的制备及其去除重金属铅Pb(Ⅱ)的性能研究

凭借着优越的还原活性,纳米零价铁在环境污染治理和修复领域应用广泛。通过将纳米零价铁(n ZVI)颗粒负载到大孔阴离子和阳离子交换树脂上,成功制备出2种树脂基纳米零价铁复合材料。研究了2种复合材料及其载体对水溶液中Pb(Ⅱ)的去除性能,考察了不同载体功能基团对复合材料去除Pb(Ⅱ)性能的影响。结果表明:以大孔阴离子交换树脂为载体的D001-Fe0复合材料因具有离子交换和化学还原双重作用,对Pb(Ⅱ)的去除效率高、速率快。