两种桑科植物叶片光合及光呼吸对模拟干旱的响应

采用150 g/L的聚乙二醇(Polyethylene glycol,PEG)模拟干旱胁迫,研究两种桑科植物(构树和桑树)的叶片光合及光呼吸特征对干旱胁迫的响应。对植物培养液的相关化学参数以及叶片的光合参数进行测定,结果表明:干旱对构树根系吸水能力的影响小于桑树的;构树以中光合-低蒸腾-高水分利用率的模式适应干旱环境,桑树以低光合-低蒸腾-高水分利用率的模式来应对干旱环境;在模拟干旱环境下,构树以稳定的羧化效率-高光呼吸速率-高光呼吸利用份额来适应外界胁迫,而桑树以低羧化效率-低光呼吸速率-低光呼吸利用份额来应对外界胁迫。构树表现出对外界干旱胁迫更好的适应性,这种适应机制可能与其较强的光呼吸作用及其碳酸氢根离子利用能力有关。这种"以碳换水"的机制可能是喀斯特适生植物适应岩溶干旱的又一个重要机制。     

离聚物（MPET）对水中铬离子的吸附性能研究

研究了离聚物（MPET）粉末对Cr^3 的吸附性能，探讨了不同的吸附温度、时间、pH值和不同的初始浓度对吸附性能的影响，实验发现Cr^3 在较低温度下和pH为4时能被MPETO分末很好地吸附，最大饱和吸附量为11.80mg/g，实验表明MPET废纤维很可能发展成为一种经济的吸附重金属离子的材料。     

国外包装废物的处理技术动向

在欧、美、日等西方国家，废包装材料已成为主要的固体废物之一，其环境污染问题日益受到关注。本文较全面地介绍废包装材料的填埋、焚烧、循环回用、再资源化利用和减少使用包装材料等五种重要技术动击与途径。还重点介绍了美国的ＰＥＴ瓶的资源再利用，以及德国建立严格的包装废物法规和完善的处理系统的概况。     

含磷酸盐对聚乙烯粉尘爆燃的抑制影响实验研究

为了揭示含磷酸盐(KH₂PO₄,NH₄H₂PO₄,Ca(H₂PO₄)₂)对聚乙烯粉尘爆炸的抑制作用,通过哈特曼管实验装置和20 L球形爆炸罐,研究含磷酸盐对聚乙烯粉尘爆炸火焰和压力传播特性的抑制效果。采用高速摄影方法记录含磷酸盐对聚乙烯粉尘爆炸火焰传播的影响;采用20 L球形爆炸罐,收集压力传感器数据,分析含磷酸盐对聚乙烯粉尘爆炸压力的影响;采用同步热分析仪研究聚乙烯粉尘和含磷酸盐的热解行为。研究结果表明：含磷酸盐对聚乙烯粉尘爆炸火焰传播特性参数和爆炸压力特性参数均有显著的影响,通过对比得到NH₄H₂PO₄抑制效果相对最好。研究结果可为含磷酸盐在抑爆剂工程应用提供理论基础。     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.     

TiO2/Ti及其改性处理聚乙二醇模拟废水

采用溶胶-凝胶法制备TiO2/Ti负载体系,并以聚乙二醇2000（PEG-2000）为模拟废水对其光催化性能进行研究。实验表明,TiO2/Ti的最佳负载条件为镀膜层数8层、pH值为3、焙烧温度700℃、焙烧时间2 h,掺杂Fe3＋、Ag＋、La3＋、Pt4＋4种金属离子均可有效提高TiO2/Ti对PEG-2000模拟废水的处理效果,在Ag＋掺杂量为0.3%、焙烧温度800℃时,2.5h反应后的COD去除率达到了79.5%。XRD分析表明,金属离子的加入抑制了TiO2由锐钛矿相向金红石相转化。GC-MS分析表明,PEG-2000的光催化是大分子分解为小分子然后被矿化的过程。     

Poly(ethylene oxide)-coated granular starch-poly(hydroxybutyrate-co-hydroxyvalerate) composite materials

Granular cornstarch was coated with several biodegradable polymers in an effort to improve the mechanical properties of starch-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) composites. Only samples containing poly(ethylene oxide) (PEO)-coated granular starch showed a large improvement in tensile properties over uncoated starch. For example, a 50/50 blend of PEO-coated starch and PHBV had a tensile strength of 19 MPa and an ultimate elongation of 23%, compared to 10 MPa and 11% for a similar blend containing uncoated starch. PEO may act as an adhesive between the starch and the PHBV and/or increase the toughness and resistance to crack growth of PHBV around the starch granules.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

聚乙二醇和海藻酸钠混合固定化硝化细菌研究

采用聚乙二醇(PEG)和海藻酸钠(SA)作为混合固定化载体材料对硝化细菌进行包埋固定化.结果表明,PEG和SA质量分数分别为6％和4％时,其溶液黏稠度、成球效果及机械强度、传质性能等方面都均为最佳.另外,固定化小球扫描电镜显示球体为外密内疏的结构,这满足体内细胞泄漏少、外面细胞难以进入的条件.将所得最佳性能的固定化小球与游离菌体进行模拟废水降解对比试验,经过7d处理后废水中氨氮和亚硝态氮质量浓度都明显下降,且固定化颗粒的降解率要明显高于游离菌株,此时氨氮的去除率为90％,亚硝态氮去除率为80％.