The presence of Bacillus thuringiensis (Bt) protein in earthworms Eisenia fetida has no deleterious effects on their growth and reproduction

Earthworms Eisenia fetida, bred in substances with stover of two genetically-engineered Bacillus thuringiensis (Bt) corns (5422Bt1 (Event Bt11) and 5422CBCL (MON810)) expressing Cry1Ab and their near-isogenic non-Bt corn (5422), were used to investigate the non-target effects of Bt corn on soil-dwelling organisms. Cry1Ab concentrations in substances, casts and guts of E. fetida were also investigated by Enzyme-linked immunosorbent assay (ELISA). More than 90% individuals of E. fetida survived over a period of 30 d, irrespective of whether they received Bt corn or non-Bt corn. Compared to 5422 treatments, significantly higher relative growth rate and more number of new offspring and cocoons of E. fetida were found in 5422Bt1 and 5422CBCL treatments. These results were unlikely to be directly caused by Cry1Ab released from Bt corns but rather by differences in other factors of plants such as plant components (soluble sugar, total organic carbon, total protein and available phosphorus of Bt corns were more than 5422). ELISA results indicated immunoreactive Cry1Ab was detectable in substances, and the casts, guts of E. fetida from Bt corns treatments, of which the highest levels were detected in substances under the corresponding experimental conditions. With the increase of treated time, a strong decline was observed in Cry1Ab from substances and casts of E. fetida, whereas Cry1Ab in guts of E. fetida from 5422Bt1 treatments gradually increased and that from 5422CBCL treatments increased between 14 and 30 d. Therefore, the presence of Cry1Ab in E. fetida had no deleterious effects on their growth and reproduction.     

上喷式矿井排风热回收装置内液滴运动模型及其优化计算

为了减小常见下喷式装置风吹水损失大的问题,设计了上喷式矿井排风热回收装置.通过液滴受力及运动分析,将上喷式液滴的运动划分为2个阶段.根据牛顿第二定律,建立了简化的液滴动量方程;在该方程的基础上,结合运动阶段划分,得到临界条件下的力平衡关系式;利用该式,在10个不同相对速度下,得到了上喷式与下喷式的保证液滴不被吹飞的临界直径.应用变量替换,将液滴动量方程变换为液滴运动距离的微分式;继而,根据液滴及空气之间的雷诺数组合,导出了液滴最大上升高度的5个积分计算式.应用这些积分式,数值计算了不同迎面风速、液滴粒径及液滴初速度下,上喷式中液滴最大上升高度、下喷式中液滴最大下降高度.对比计算结果,相比下喷式,上喷式具有节水、液滴选择范围宽和低耗高效的优势.     

转cry1Ab基因水稻中毒蛋白的表达、分泌及其在土壤中的残留

研究了转cry1Ab基因水稻(克螟稻)中Cry1Ab毒蛋白的表达、根系分泌及其在土壤中的残留规律.结果表明,分蘖始期至成熟期,克螟稻地上部和根部中的Cry1Ab毒蛋白的表达量(FW)分别为3.23～8.22 μg/g和0.68～0.89 μg/g.生育期间克螟稻根系分泌的Cry1Ab毒蛋白含量仅为1.66～48.02 ng/(株·d).试验证实,克螟稻根际土中的Cry1Ab毒蛋白残留含量低于检测限(<0.5ng/g 干燥土).生物测定还表明,克螟稻根际土及其提取液对棉铃虫初孵幼虫和3龄幼虫不产生致死性效应.相对于Cry1Ab毒蛋白的根系分泌转移,克螟稻秸秆还田对土壤环境的影响应引起重视.     

桐油水解制备咪唑啉缓蚀剂及其量子化学研究

目的 开发原料价廉易得、能实际应用的缓蚀剂。方法 以桐油为原料,水解后得到桐油酸,然后与二乙烯三胺经过酰胺化和环化反应,生成桐油咪唑啉缓蚀剂。在模拟现场环境的条件下对所合成的桐油咪唑啉缓蚀剂进行电化学测试和高温高压性能评价。利用量子化学计算对桐油咪唑啉缓蚀剂的分子动力学进行模拟,探讨其在Fe表面的吸附作用。结果 红外光谱显示,桐油水解后可生成桐油酸,最终合成物为桐油咪唑啉。电化学测试表明,随着桐油咪唑啉缓蚀剂添加量的增大,20#测试钢片的自腐蚀电位逐渐提高,腐蚀电流降低。高温高压模拟实验显示,加入油酸咪唑啉后,腐蚀速率明显降低,由0.3181 mm/a降到了0.0392 mm/a。量子化学计算表明,桐油咪唑啉分子中的咪唑啉环会平行吸附于铁表面,形成一层缓蚀剂膜。结论 价廉易得的桐油经水解后可得桐油酸,再与二乙烯三胺经过酰胺化和环化反应最终合成了桐油咪唑啉缓蚀剂。该缓蚀剂添加量越大,对20#钢片的缓蚀效果越好,呈现出了较好的缓蚀效果,其分子结构中的咪唑环能平行吸附于铁表面,属于抑制阳极型缓蚀剂。     

多年连续种植转基因Bt汕优63稻田水体和土壤中Cry1Ab/c蛋白残留调查

以湖北武汉、随州、武穴和孝感以及山东德州5个多年转基因水稻种植区为试验地,在水稻生育期采集转cry1 Ab/c基因水稻Bt汕优63(Bt-SY63)和对照非转基因汕优63(SY63)稻田水体和土壤,使用酶联免疫吸附测定(ELISA)方法对稻田水体和土壤Cry1 Ab/c蛋白残留量进行动态监测.结果显示,与SY63稻田相比,连续种植2～4 a后,不同生育期Bt-SY63稻田水体Cry1Ab/c蛋白残留量大多与同一生育期SY63样品间差异未达显著水平(P＞0.05),最高残留量为0.373 ng· mL-1.与水体Cry1Ab/c蛋白残留情况相似,不同生育期Bt-SY63稻田土壤Cry 1Ab/c蛋白残留量大都低于试剂盒检测限(0.25 ng·g-1),仅随州苗期、德州拔节期和开花期样品有微量残留,鲜土残留量分别为0.261、0.540和0.361 ng·g-1,并分别与SY63样品间差异显著(P＜0.05).另外,多年连续种植Bt-SY63水稻后,2、3和4a种植年限的Bt-SY63稻田水体和土壤中Cry1Ab/c蛋白残留量之间大都没有显著差异(P＞0.05).认为连续种植2、3和4a的Bt-SY63水稻稻田水体和土壤仅存在微量Cry1Ab/c蛋白残留,不会造成Cry1Ab/c蛋白在稻田水体和土壤中的累积.     

苏云金芽孢杆菌新基因cry1Ab17的克隆和生物信息学

利用高效克隆PCR产物的专用载体pMD18T,直接从苏云金芽孢杆菌WB9的PCR产物中克隆了cry1Ab17新基因.测序结果表明,该基因(GenBank登录号为AY646166)由3471个碱基组成,其编码的蛋白质含有1156个氨基酸残基,其中亲水性氨基酸占30.8%,疏水性氨基酸占45.2%,酸性氨基酸占12.9%,碱性氨基酸占11.1%.氨基酸序列的同源性分析结果表明,Cry1Ab17蛋白与已报道的Cry1Ab蛋白同源性为95.4%～99.7%,该蛋白的4个氨基酸残基———Pro170、Gly449、Gly796和Gly863与其它已报道Cry1Ab蛋白相应位置的氨基酸残基均不同.在核苷酸序列和氨基酸序列多重比较的基础上,应用PAUP4.0构建了Cry1A蛋白家族的系统发育树.SignalP分析结果显示,Cry1Ab17蛋白中不含信号肽序列.此外,对Cry1Ab17蛋白的二级结构和3个结构域也进行了预测和分析.图4表2参15     

The internal barriers of rotation for the 209 polychlorinated biphenyls

The internal barrier of rotation (Erot) was calculated for all 209 polychlorinated biphenyls (PCBs) by using a semi-empirical method, viz. the Austin Model 1 (AMI) Hamiltonian. The difference in total energy between a forced planar state and an optimised twisted structure was defined as Erot. The Erot values were in the range of 8.33 to 483 kj/mol, and were significantly influenced by the number of chlorine atoms inortho position. An additional structural characteristic of the PCBs influencing Erot ofortho substituted congeners was substitution by chlorine atoms in vicinalmeta positions, which is assumed to prevent outward bending ofortho substituents. This so-called buttressing effect contributed with 4 to 31 kj/mol per added chlorine atom. In conclusion, the internal barrier of rotation, calculated for all 209 PCBs, provides an important structure dependent physico-chemical parameter for multivariate modelling of future quantitative structure-activity and structure-property relationships (QSARs/QSPRs).     

H2O2与OH反应的量子化学研究

用从头计算法在ＵＨＦ／６－３１Ｇ＾＊８水平下研究了Ｈ２Ｏ２与ＯＨ的反应机理。通过振动分析确认了过渡态,利用ＧＡＭＥＳＳ程序得到内禀反应坐标（ＩＲＣ）,计算了反应活化能,得到与实验较为一致的结果。研究表明,该反应是一步直接的夺氢反应。     

Practical aspects of occupational EMF exposure assessment

Electromagnetic fields exposure assessment methodology is briefly presented. The basic problems defined for the practical use of electromagnetic fields measurements and numerical calculations carried out for workers exposure assessment in real occupational situations are discussed. The examples of data from real workplace are presented, focusing: spatial distribution of electromagnetic fields affecting worker’s body, complex characteristics of the frequency content, workers activities/moving in the workplace, field impedance, etc. The situation when the use of calculations is required is discussed. The basic requirements for workers exposure assessment protocols are presented. The possible range of the use of internal and external measures of exposure level is also discussed.     

高含盐污水雾化蒸发塔的设计及流场数值模拟

针对含盐量为7×104mg/L的油田高含盐污水,设计1套处理量为28.8 kg/h的雾化蒸发塔,估算出塔体高度及直径,从而得出适宜的进口空气流速。基于标准k-ε双方程模型和DPM模型,对所设计的雾化蒸发塔内液滴蒸发过程进行数值模拟,得到塔内流场分布特性及蒸发特性,通过随机轨道模型追踪了液滴颗粒运动轨迹及液滴Na Cl浓度变化。在算例工况下,塔内蒸发效率可达58.9%。