Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

Deterioration of bioplastic carrier bags in the environment and assessment of a new recycling alternative

Increasing environmental concerns and the introduction of technologies based on renewable resources have stimulated the replacement of persistent petroleum-derived plastics with biodegradable plastics from biopolymers. As a consequence, a variety of products are currently manufactured from bioplastic, including carrier bags. This series of studies investigated the deterioration of carrier bags made with Mater-Bi (MB), a starch-based bioplastic, in soil, compost and two aquatic ecosystems, a littoral marsh and seawater. Results from the laboratory study indicated that bioplastic carrier bags were rapidly deteriorated in soil and compost. After three months of incubation, weight loss of specimens was of 37% and 43% in soil and compost, respectively. Conversely, little deterioration was observed in specimens buried in soil under field conditions or exposed to water of a littoral marsh and of the Adriatic Sea. These findings were consistent with the greater number of bacteria and especially fungi capable of degrading MB that were recovered from soil and compost with respect to the two aquatic ecosystems. Considering that a variety of microbial isolates are capable of using MB as a source of carbon, a new alternative to recycle these MB-based carrier bags was explored. More specifically, starchy residues from bags were fermented by the fungus Rhizopus oryzae to produce up to 35 mg of lactic acid per g of bag residues.     

Characterization of changes in extracellular polymeric substances and heavy metal speciation of waste activated sludge during typical oxidation solubilization processes

Biopolymer solubilization is considered to be the rate-limiting stage of anaerobic digestion of waste activated sludge(WAS). Oxidation processes have been proven to be effective in disrupting sludge flocs and causing solubilization of the solid biopolymers. In this study,WAS was treated by NaNO2 or H2 O2 oxidation at p H of 2. The changes in extracellular polymeric substances properties and the speciation of heavy metals were investigated. The results revealed that both NaNO2 and H2 O2 treatments were effective in solubilizing organics in WAS, while the conversion of biopolymers in the two treatment processes was different. Free nitrous acid destroyed the gel network structure of EPS, and organic materials were released from the solid phase to the supernatant. Indigenous peroxidase catalyzed H2 O2 to produce hydroxyl radicals which caused significant solubilization of biopolymers, and the protein-like substances were further degraded into micro-molecule polypeptides or amino acids at high dosages of H2 O2. During the oxidation processes, Zn, Cd and Cu, with excellent mobility, tended to migrate to the supernatant, and thus were easy to remove through the liquid–solid separation process. Ni and As showed moderate migration ability, of which the residual fraction tended to transform into reducible and soluble fractions. With poor mobility, Cr and Pb mainly existed in the forms of residual and oxidizable fractions, which were difficult to dissolve and remove from WAS. Both NaNO2 and H2 O2 treatment resulted in the enhancement of sludge solubilization efficiency and heavy metal mobility in WAS, but different heavy metals showed distinct migration and transformation behaviors.     

Flocculants—an Ecofriendly Approach

Although water-soluble synthetic polymers find wide applications as flocculants, the potential problem associated with their use is lack of biodegradability and high cost. Polysaccharides owing to their distinctive features like ability to undergo different chemical reactions, biodegradability and sustainability inspire hope to obtain effective, economical viable and safe substitute of the synthetic flocculants. In this regard, chemical modification of Cassia tora and guar gum was carried out through different substitution and grafting reactions. The modified products were tested against kaolin under laboratory conditions vis-a-vis polyacrylamide based synthetic flocculant.     

Degradation of Commercial Biodegradable Packages under Real Composting and Ambient Exposure Conditions

The use of long-lasting polymers as packaging materials for short lived applications is not entirely justified. Plastic packaging materials are often soiled due to foodstuffs and other biological substances, making physical recycling of these materials impractical and normally unwanted. Hence, there is an increasing demand for biodegradable packaging materials which could be easily renewable. Use of biopolymer based packaging materials allows consideration of eliminating issues such as landfilling, sorting and reprocessing through taking advantage of their unique functionality, that is compostability. Composting allows disposal of biodegradable packages and is not as energy intensive compared to sorting and reprocessing for recycling, although it requires more energy than landfilling. The aim of this work was to study the degradation of three commercially available biodegradable packages made of poly (ld-lactide) (PLA) under real compost conditions and under ambient exposure by visual inspection, gel permeation chromatography, differential scanning calorimetry, and thermal gravimetric analysis. A novel technique to study the degradability of these packages and to track the degradation rate under real compost conditions was used. The packages were subjected to composting for 30 days, and the degradation of the physical properties was measured at 1, 2, 4, 6, 9, 15 and 30 days. PLA packages made of 96% l-lactide exhibited lower degradation than PLA packages made of 94% l-lactide, mainly due to their highly ordered structure, therefore, higher crystallinity. The degradation rate changed as the initial crystallinity and the l-lactide content of the packages varied. Temperature, relative humidity, and pH of the compost pile played an important role in the total degradation of the packages. A first order degradation of the molecular weight as a function of time was observed for the three packages.     

Biopolymers in the Existing Postconsumer Plastics Recycling Stream

The existing plastic bottle reclaiming industry has working technology, satisfied customers, raw material, and investors. Adding new materials to the current mix requires satisfying all four needs for those materials. Rigid plastic container recycling focuses on high-density polyethylene (HDPE) and polyethylene terephthalate (PET) bottles, the overwhelming percentage of bottles sold in North America. Bottles of other resins, including polyvinyl chloride (PVC), polypropylene and biopolymers, lack critical mass necessary for independent reclamation. To be mechanically recycled, biopolymers must be either completely fungible with existing recycled resins or be available in sufficient quantity to achieve the needed critical mass. So far, biopolymer volume projections are not encouraging. Biopolymers, like all minor bottle resins, must pay their own way in sorting and processing without subsidy from PET and HDPE recycling. Based on limited data, some biopolymers may have little effect on recycled HDPE performance, but will represent a yields loss and added economic burden at some level of occurrence. Biopolymers have not been shown to be compatible with PET and likely will represent performance problems and economic burdens at even low levels of occurrence. Applications for biopolymers should be carefully selected so as to not interfere with currently recycled materials unless critical mass can be achieved quickly.

Renewable Cellulose Derived Carbon Nanospheres as Nucleating Agents for Polylactide and Polypropylene

Nucleation of polylactide and polypropylene using novel renewable resource biobased carbon nanospheres (CNS) is investigated using differential scanning calorimetry and polarized optical microscopy. Isothermal studies near the optimal crystallization temperature demonstrate at least a five-fold increase in crystallization rate in PP but only a 1.4 times faster crystallization in PLA. Non-isothermal studies reveal an asymptotic relationship of the maximum crystallization temperature with increasing CNS weight loading in PP and no relationship in PLA. Microscopy indicates some aggregation in the solution blended samples and that average spherulite size is reduced 10-fold due to faster nucleation in the composites as compared to the neat polymer. The fractional crystallinity achieved during non-isothermal crystallization increases by about 7% with addition of a small amount of CNS and decreases with weight loading higher than 1%. The crystallization rates obtained in polypropylene are competitive with widely used mineral talc nucleating agents.     

Mechanical Property and Biodegradability of Cast Films Prepared from Blends of Oppositely Charged Biopolymers

Biodegradable cast films of about 50 m thickness were fabricated by blending oppositely charged biopolymers such as anionic starch–chitosan, and cationic starch–pectin. The tensile strength and elongation at break (%) of films were evaluated as well as their capacity to degrade in compost. Films recovered from soil every 48 h showed consistent degradation (weight loss), diminution of the polymers characteristic peak absorbance in the carbohydrate fingerprint region of the FTIR, and changes in the surface morphology via scanning electron microscopy (SEM). Anionic starch–chitosan films had much superior tensile strength and elongation compared to cationic starch–pectin, suggesting that the ionic bonds formed between anionic-starch and positively charged groups in chitosan polymer were much more stable and stronger. Initially, both films lost about 36% weight within 96 h, which also correlated well with the loss in the characteristic absorption peaks in the region of the infrared spectrum typical of biopolymers. The total mineralization of films by microorganisms in compost soil was also measured using respirometric techniques. Though the rate of mineralization differed for two formulations, total mineralization (extent) for both films were achieved within 45 days.