机动车轮胎磨损颗粒物化学组分特征研究

为研究机动车道路行驶过程中轮胎磨损排放的颗粒物理化特性,利用轮胎轮廓仿真磨耗仪,对国内主流17种轮胎胎面进行仿真磨耗实验,获得颗粒物样品,提取并检测其中18种元素和20种多环芳烃（PAHs）的含量.结果显示,元素和PAHs含量因轮胎品牌和速度等级的不同而差异显著.18种元素平均含量为（99.04±68.43）mg/g,占样品总重的9.90%,其中Si（88.97±67.85）mg/g、Zn（6.77±1.64）mg/g和Na（1.05±0.75）mg/g的平均含量均超过1mg/g,Cd的含量最低,为（0.43±0.31）μg/g.20种PAHs含量之和（∑20PAHs）在12.13~433.64 μg/g,平均为（94.13±110.18）μg/g,PY的平均含量最高（30.98±31.27）μg/g,其次是CHR、BaP、FA、PHE和BghiP,平均含量最低的是AC（0.58±0.2）μg/g;从环数看,以4环PAHs为主（占∑20PAHs的45.03%~67.93%）,其次为3环（平均含量为15.45%）和5环（平均含量为12.62%）.总体来说,国外品牌轮胎样品中元素和PAHs含量略高于国内品牌,而主要PAHs环数略低于国内品牌.     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Concentrations and chemical compositions of PM10 during hazy and non-hazy days in Beijing

In order to study the concentrations of major components,characteristics and comparison in hazy and non-hazy days of PM_(10) in Beijing,aerosol samples were collected at urban site in Beijing from December 29,2014 to January 22,2015.Heavy metals like Zn,Pb,Mn,Cu,As,V,Cr and Cd were deeply studied considering their toxic effects on human being;nine water-soluble inorganic ions(SO_4~(2-),NO_3~-,NH_4~+,Na~+,K~+,Cl~-,Ca~(2+) and Mg~(2+)) and carbon fractions(OC and EC) were also analyzed.The concentrations of heavy metals were 1.03–1.98 times higher in hazy days than those in non-hazy days,mainly due to biomass burning and coal burning.The trends in total heavy metals concentrations were basically consistent with the trends in PM concentrations except for two obvious periods(12.29–12.30;1.14–1.15);but when air masses accumulated locally or around Beijing,trends in PM concentrations and heavy metals were opposite.The proportion for NO_3~-/SO_4~(2-) indicated that mobile sources such as automobiles were important reasons for haze in Beijing.Correlation between OC and EC during non-hazy days was strong(R~2= 0.95) but it was low(R~2= 0.67) during hazy days,and large variations for OC/EC values occurred in hazy days.The calculated mass concentration of SOC is 2.58 μg/m~3,which only accounted for 10.1% of the OC concentration.When air masses from the far north-west,they decreased PM concentration in Beijing and they were relatively clean;however,those from the near east,south-east and south of the mainland increased PM concentration and they were dirty.     

大兴安岭5种乔木树种燃烧释放PM2.5中水溶性元素特性

采用自主设计的生物质燃烧实验装置,在不同燃烧状态（明燃、阴燃）下,对大兴安岭林区5种典型乔木树种的不同部位（枝、叶、皮）燃烧释放PM_2.5中的水溶性元素特性进行研究.结果显示,不同树种间PM_2.5的排放因子差异显著,排放范围为（2.408±0.854）~（9.227±1.172）g/kg.5种乔木树种燃烧释放PM_2.5中主要检测到Mg、Ca、K等16 种元素,其中Ca、K、Zn、Mg 4种元素的排放因子明显大于其它元素.不同树种间元素排放因子差异较大,针叶树的排放因子一般高于阔叶树.除Cd元素外,不同器官间排放的元素总量无明显差异.不同树种不同器官燃烧释放PM_2.5中水溶性元素的占比顺序较为一致,其中Ca、K、Zn和Mg 4种元素的排放因子在枝、叶、皮中均较高.此外,燃烧状态对元素排放特征影响较大,Li、Mg、Ca等7种元素的排放因子均表现为明燃显著高于阴燃.     

煤中有害元素对环境和人体健康影响的评价参数

煤中有害元素对环境和人体健康影响的较为全面的评价体系一直未建立，环保部门也缺乏系统性评价参数对电厂等在煤煤过程中有害元素排向大气的释放量进行监测估算。本文在查阅大量资料（主要为外文）的基础上，认为评价煤中有害元素对环境和人体健康影响的参数应该包括以下方面的数据C、H、O、N、无机硫，有机硫，有害微量元素的含量，分布规律，赋存状态，迁移转化行为（在燃煤过程中），洁净能力，淋滤力，矿物质，有机化学特征，煤炭学特征，并对煤中有害元素的污染方法进行探讨，如果上述各参数的数据被全面提供，并据此数据作针对性的抑制措施，煤中有害元素对环境和人体健康危害影响必将降低到最小。     

中国乳腺癌与土壤环境中化学元素的相关性研究

利用土壤元素资料２０６９４４８个数据、乳腺癌死亡调查资料３１３２０例，研究了乳腺癌死亡率与人群生存的土壤环境中64个元素的相关性。结果表明，砷、汞、钡、铊、钕、铀、锆、锑等元素与乳腺癌死亡率有相关性。等级相关系数分别为－０．６８２０（Ｐ〈０．０００５）、０．４５６７（Ｐ〈０．０１）、－０．３７７３（Ｐ〈０．０２５）、－０．３８５２（Ｐ〈０．０２５）、０．３１７９（Ｐ〈０．０５）、－０．４３７７（Ｐ〈     

SBR-COR工艺处理高浓度、多品种混合化工污水

介绍了ＳＢＲ－ ＣＯＲ 工艺处理高浓度、多品种混合化工污水的工艺流程、工作原理及闲置保养情况，详细地阐述了活性污泥生物相与运行状况的关系。实际运行表明，ＳＢＲ－ ＣＯＲ 具有重新启动所需时间短、微生物激活快，对浓度高、毒性大的化工污水具有耐冲击特性，外理效果显著。     

Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．