丝瓜瓤固定无花果曲霉吸附活性艳蓝KN-R的脱色研究

利用植物载体丝瓜瓤对无花果曲霉(Aspergillus ficuum)进行固定,并对活性艳蓝KN-R进行脱色研究探讨了固定化菌体的菌龄、pH、温度、菌量对染料脱色的影响.比较了固定化菌体与菌丝球对活性艳蓝KN-R的脱色效果,研究了该固定化菌体的重复利用和动力学实验,并进行了实际废水的脱色研究.结果表明,最佳脱色条件为菌龄3d,温度33℃,pH为6.0,菌量对染料脱色的影响依次为2%＞1%＞0.5%;固定化菌体对活性艳蓝KN-R的脱色效果优于菌丝球,且它对实际染料废水的脱色率均达80%以上;丝瓜瓤固定无花果曲霉对不同初始浓度(25～186mg·L-1)活性艳蓝KN-R的脱色过程遵循二级动力学方程;经6次重复利用后的该固定化菌体,其脱色率仍达80.79%.     

Acute toxicity, biochemical and gene expression responses of the earthworm Eisenia fetida exposed to polycyclic musks

Phytoremediation is a novel and promising approach for the treatment of pollutants. This study did explore the potential of Aster amellus Linn. to decolorize a sulfonated azo dye Remazol Red (RR), a mixture of dyes and a textile effluent. Induction in the activities of lignin peroxidase, tyrosinase, veratryl alcohol oxidase and riboflavin reductase was observed during RR decolorization, suggesting their involvement in the metabolism of RR. UV-Visible absorption spectrum, HPLC and FTIR analysis confirmed the degradation of RR. Four metabolites after the degradation of the dye were identified as 2-[(3-diazenylphenyl) sulfonyl] ethanesulfonate, 4-amino-5-hydroxynaphthalene-2,7-disulfonate, naphthalene-2-sulfonate and 3-(1,3,5-triazin-2-ylamino)benzenesulfonate by using GC/MS. Textile effluent and mixture of dyes showed 47% and 62% decrease respectively in American Dye Manufacturers Institute value. BOD of textile effluent and mixture of dyes were reduced by 75% and 48% respectively, COD of industrial effluent and mixture of dyes was reduced by 60% and 75% and TOC was reduced by 54% and 69% respectively after the treatment by A. amellus for 60 h; this indicated that the plant can be used for cleaning textile effluents. Toxicity study revealed the phytotransformation of RR into non-toxic products.     

Enhanced bio-decolorization of 1-amino-4-bromoanthraquinone-2-sulfonic acid by Sphingomonas xenophaga with nutrient amendment

Bacterial decolorization of anthraquinone dye intermediates is a slow process under aerobic conditions. To speed up the process, in the present study, effects of various nutrients on 1-amino-4-bromoanthraquinone-2-sulfonic acid (ABAS) decolorization by Sphingomonas xenophaga QYY were investigated. The results showed that peptone, yeast extract and casamino acid amendments promoted ABAS bio-decolorization. In particular, the addition of peptone and casamino acids could improve the decolorization activity of strain QYY. Further experiments showed that L-proline had a more significant accelerating effect on ABAS decolorization compared with other amino acids. L-Proline not only supported cell growth, but also significantly increased the decolorization activity of strain QYY. Membrane proteins of strain QYY exhibited ABAS decolorization activities in the presence of L-proline or reduced nicotinamide adenine dinucleotide, while this behavior was not observed in the presence of other amino acids. Moreover, the positive correlation between L-proline concentration and the decolorization activity of membrane proteins was observed, indicating that L-proline plays an important role in ABAS decolorization. The above findings provide us not only a novel insight into bacterial ABAS decolorization, but also an L-proline-supplemented bioaugmentation strategy for enhancing ABAS bio-decolorization.     

Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.     

Biological treatment of dye wastewaters using an anaerobic-oxic system

Three dye solutions, namely, C.I. Acid Yellow 17, C.I. Basic Blue 3, and C.I. Basic Red 2, were treated in an upflow anaerobic sludge blanket (UASB) reactor followed by a semi-continuous aerobic activated sludge tank. When hydraulic retention time was about 12 hours, no significant color removal was observed in the aerobic stage. In the anaerobic stage, Acid Yellow 17, Basic Blue 3, and Basic Red 2 were removed by 20%, 72%, and 78%, respectively. To treat wastewater from a dye manufacturing factory with COD concentration of 1200 mg/l and Color of 500 degree (dilution factor), an UASB reactor (4.5 liters) and an activated sludge tank (5 liters, adjustable), COD and color were removed by more than 83% and 90% at a COD loading rate of 5.3 kg COD/m³-day in the anaerobic stage, and at the hydraulic retention time of 6-10 hours for the anaerobic stage and 6.5 for the aerobic stage. The anaerobic stage of the A/O system removes both color and COD. In addition, it also improves biodegradability of dyes for further aerobic treatment.     

印染废水混凝脱色技术的分子结构基础

印染废水的混凝脱色效果取决于染料分子的分子结构及其在水中的分子分散状态和染料的染色机制。大量研究结果表明，所选用的染料分子的分子结构决定了印染废水混凝脱色技术的混凝机制和混凝效果，合成絮凝剂与选择絮凝剂应充分考虑染料分子的分子结构与空间构型。     

Comparative studies of the Fe–UV, H2O2–UV, TiO2–UV/vis systems for the decolorization of a textile dye X-3B in water

The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ  320 nm), but was decolorized when one of Fe³⁺, H₂O₂ and TiO₂ components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe²⁺–H₂O₂–UV  Fe²⁺–H₂O₂ > Fe³⁺–H₂O₂–UV > Fe³⁺–H₂O₂ > Fe³⁺–TiO₂–UV > TiO₂–UV > Fe³⁺–UV > TiO₂–visible light (λ  450 nm) > H₂O₂–UV > Fe²⁺–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity.     

新生态MnO2吸附法处理水溶性阴离子染料废水的研究

研究了各种水溶性阴离子染料在新生态MnO2表面的脱色作用。结果表明,9种不同模拟染料废水(包括直接染料、酸性媒介染料、活性染料)的脱色效果均十分显著．且脱色过程受pH的影响较大。另外。通过CHN元素分析、差热分析、紫外光谱及滴定分析等测试手段．初步认为在酸性介质下．新生MnO2质子化的表面可以吸附阴离子型染料,从而将其去除。     

Fenton法脱色降解活性黑5模拟废水

本研究对benton试剂脱色降解活性黑5模拟废水进行了初步的实验研究。在恒温条件下,分别以600nm和255nm波长下染料溶液吸光度为主要测定指标,对该种染料的脱色及其芳环结构的氧化降解进行了同步分析。考察了染料溶液初始pH值、Fe^2＋浓度、H2O2投加量、染料浓度等因素的影响。结果表明,在一定实验条件下,活性黑5的脱色效率可达到99％,染料芳环结构的降解可达30％,COD去除率达到57．5％。活性黑5的脱色降解过程分为两个阶段进行。在最佳pH范围内,H2O2投加量、Fe^2＋浓度、染料浓度对染料初始脱色速率影响不大,但对后续的芳环结构降解影响较大。     

脱色-水解酸化(ABR)-接触氧化工艺处理中成药制药废水

采用脱色-水解酸化(ABR)-接触氧化工艺对中成药制药废水进行处理,其工艺具有操作简便、运行成本低、出水水质稳定、处理效果好等特点,是中成药制药废水可行的处理方法之一.