Modeling of non-point source pollution in a Mediterranean drainage basin

SWAT ver. 2000 was used to predict hydrographs, and sediment, nitrate and total phosphorus loadings from a 1349 km² mountainous/agricultural watershed in Northern Greece. The model was calibrated and verified using continuous meteorological data from eight stations within the drainage area, and runoff, sediment and nutrient concentrations measured at nine stations located within the main tributaries of the watershed, for the time period from May 1st, 1998 to January 31st, 2000. Model validation methodology and resulting input parameters appropriate for Mediterranean drainage basins are presented. Predicted by the model hydrographs, sedimentographs and pollutographs are plotted against observed values and show good agreement. Model performance is evaluated using the root mean square error computation and scattergrams of predicted versus observed data. The validated model is also used to test the effectiveness of three alternative cropping scenarios in reducing nutrient loadings from the agricultural part of the watershed. The study showed that this model, if properly validated, can be used effectively in testing management scenarios in Mediterranean drainage basins.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

Transboundary air pollution balance in the new integrated European environment

Ten out of the 12 new EU members, used to belong to the so-called “former eastern block”, with a post WWII environmental policy radically different from the tendencies followed in Western Europe. The lack of conservation regulations has resulted in a rather harmful industrialization, regarding natural resources and environmental quality. While air pollution transfer is a phenomenon of transboundary level, there is a particular interest in examining the contribution of the new EU member states to the environmental pressure faced by the older member states and vice versa. The current study utilises the official data for almost 20 years published by the European Monitoring and Evaluation Program concerning the transboundary transfer of NO_x and SO₂ in order to analyse the situation and discuss the present and future environmental policy regarding air pollution.     

用线性分配法评价重庆主城区排水系统方案

根据综合评价的目的及要求，建立了重庆主城区排水系统方案的评价体系，并用线性分配法对诸方案进行了综合评价。     

Past and future sustainability of water policies in Europe

The article contributes to a discussion on two global issues on water: water resources management, and water supply and sanitation. Focusing on Europe, it traces the legal roots of current systems in history: as a resource, water is considered as a common property, rather than a market good; while as a public service it is usually a commodity. Public water supply and sanitation technologies and engineering have developed under three main paradigms: quantitative and civil engineering; qualitative and chemical/sanitary engineering (both on the supply side); and the most recent one, environmental engineering and integrated management (on the demand side). The cost of public drinking water is due to rise sharply in view of the two‐fold financial challenge of replacing an ageing infrastructure and keeping up with ever‐rising environmental and sanitary quality standards. Who will pay? Government subsidies, or water users? The author suggests that apparent successes with privatisation may have relied heavily on hidden government subsidies and/or the healthy state of previously installed water infrastructure: past government subsidies are still felt for as long as the lifetime of the infrastructure. The article stresses the importance of public participation and decentralized local management of water and sanitation services. Informing and involving users in water management decisions is seen as an integral part of the ‘ethics’ side of the crucial three E's (economics, environment, ethics). The article strongly argues for municipal provision of water services, and hopes that lessons learnt and solutions found in the European experience may serve water services management efforts in other regions of the world.     

Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

Freshwater fish diversity hotspots for conservation priorities in the Amazon Basin

Conserving freshwater habitats and their biodiversity in the Amazon Basin is a growing challenge in the face of rapid anthropogenic changes. We used the most comprehensive fish-occurrence database available (2355 valid species; 21,248 sampling points) and 3 ecological criteria (irreplaceability, representativeness, and vulnerability) to identify biodiversity hotspots based on 6 conservation templates (3 proactive, 1 reactive, 1 representative, and 1 balanced) to provide a set of alternative planning solutions for freshwater fish protection in the Amazon Basin. We identified empirically for each template the 17% of sub-basins that should be conserved and performed a prioritization analysis by identifying current and future (2050) threats (i.e., degree of deforestation and habitat fragmentation by dams). Two of our 3 proactive templates had around 65% of their surface covered by protected areas; high levels of irreplaceability (60% of endemics) and representativeness (71% of the Amazonian fish fauna); and low current and future vulnerability. These 2 templates, then, seemed more robust for conservation prioritization. The future of the selected sub-basins in these 2 proactive templates is not immediately threatened by human activities, and these sub-basins host the largest part of Amazonian biodiversity. They could easily be conserved if no additional threats occur between now and 2050.     

Investigation of multiple domino scenarios caused by fragments

A model of multiple domino scenarios and the risk of the domino effect, which is a sequential chain escalating from the primary unit to the last unit, is presented in this paper. The trajectories of fragments from all units, the ground distribution of projectiles, and the risk of the sequential chain of the domino effect were calculated using Monte Carlo simulations. The results showed that the range affected by the fragments from each tank included the other tanks, meaning that fragments from one tank could hit the other tanks and cause multiple accidents, and that the sequential chain of the domino effect could indeed happen. The distributions of ground impacts showed that tank fragments were projected over long distances, up to 1200 m from the source. The spatial distribution of the kinetic energy at ground impact for tank fragments was also obtained. Moreover, the magnitudes of the probabilities of the primary, secondary, third, and fourth accidents in the domino chain were respectively about 10⁻⁷, 10⁻¹¹, 10⁻¹⁵, and 10⁻¹⁹. These results showed that for neighboring domino effect units in the same accident chain, the risk of the most recent domino effect was 10⁴ times that of the following domino effect.     

Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.     

矿区植被恢复方式对土壤微生物和酶活性的影响

矿区废弃地生态退化形势严峻,生态修复已成为矿区可持续发展的主要措施,土壤微生物和酶活性可作为评价土壤恢复质量的敏感因子.本研究将以山西省安太堡煤矿复垦区作为对象,分析植被恢复方式对土壤微生物和酶活的影响.结果表明,不同植被方式对土壤理化特征、参与氮代谢的3类菌群(固氮菌、硝化细菌和反硝化细菌)和4种酶活性(蔗糖酶、过氧化氢酶、脲酶和多酚氧化酶活)均有显著影响.土壤总氮含量与固氮菌和硝化细菌数量均显著相关,而与反硝化细菌不相关.多酚氧化酶活性与有机碳和总氮含量之间为负相关,而其它3种酶与有机碳和总氮之间呈正相关.通过主成分分析计算综合肥力指标,刺槐-油松混交林土壤综合肥力指标最高,而未复垦综合肥力指标最低.可见,刺槐-油松混交林是晋西北干旱区矿区复垦较为适宜的植被恢复模式.