螯合树脂在线富集——火焰原子吸收光度法测定水中微量Cu,Pb,Zn,Cd

对螯合树脂在线富集，火焰原子吸收光度法进行了条件试验。试验证实方法对Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ４个元素检出浓度可达μｇ／Ｌ级，校准曲线性、样品重现性及准确度可满足测定要求。     

采样系统中金属氧化物对SO2测定值影响分析

通过实验与实际工程相结合，定量描述了大气采样系统中金属氧化物的存在对ＳＯ２测定值的影响，并阐述了其反应机理，提出了相应措施。     

颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．     

重金属污染土壤植物修复法

重金属污染土壤的植物修复技术是近年来发展起来的一种较新的生态技术 ,其中 ,寻找重金属超富集植物是目前世界范围的研究热点。本文简要评述了重金属污染土壤的植物修复法的原理及类型 ,重金属超富集植物的应用潜力与最新展望 ,对国内外在这一领域的研究进展作一简单综述。     

人工智能在金属塑性加工领域中的应用

概述了人工智能及其 2个主要分支 (专家系统和人工神经网络 ) ,讨论了遗传算法与专家系统集成以及神经网络与模糊逻辑、专家系统集成的必要性和集成方法 ,分别介绍了专家系统和人工神经网络在塑性加工领域中的应用现状。     

一种预测左半部成形极限图的简单方法

板材成形性能的评价一般基于成形极限图(FLD)。然而，无论是经由理论计算还是实验方法来获得成形极限图依然很困难而且很耗时。提出了一种预测深拉延部分成形极限图的新方法。假设对所有钢板来说其成形极限图的形状几乎都是一样的，而深拉延变形区域内其失效厚度应变也几乎一样，据此可利用体积不变原理推导出主应变和次应变之间的关系。结果表明，根据此方法计算的左半侧(拉深应变区)成形极限图与实验获得的FLD基本一致。     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

金属尾矿废弃地的生态恢复

尾矿废弃地是一种典型的退化生态系统。本文通过对其生态恢复所面临问题的研究，讨论了尾矿废弃地生态恢复的理论和方法，分析了使用外来物种对于尾矿废弃地这一独特的退化生态系统进行恢复的可能性，并探索了尾矿废弃地生态恢复的评价标准。     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

烟草废弃物快速堆肥过程中重金属Cd形态变化特征

以烟草废弃物为原料,活性土壤为载体建立堆体,研究重金属镉的形态变化,及堆肥过程中的动态变化规律。结果表明,烟草废弃物与活性土壤混合能快速腐熟。堆肥总质量下降,重金属镉含量相对增加。重金属镉的铁锰氧化态比例增加19%,有机结合态比例在堆肥升温阶段增加,腐熟后有所下降。残渣态比例大幅度上升,增加达到5倍,且在腐熟阶段增幅最大。说明堆肥处理有利于降低重金属镉的活性。