污染物的微生物毒性检验

从文献报导的１０几种污染物毒性试验方法中，选择了脱氢酶活性、Ｍｉｃｒｏｔｏｘ毒性、微生物呼吸率、以及降解动力学等４种方法，系统地比较，研究了其表示污染物对微生物的毒性效应的灵敏性，准确性，可靠性和实用性，研究结果应用于焦化废水、染化废水与黄浦江水样的检验表明，ＭＴＸ方法能最好地反映污染物的微生物毒性，且操作简便，费时少，数据的解释也最为方便。     

Studies on the Coupling Product between Oxidation Products Derived from Pentachlorophenol and Cyclodextrins

The coupling products (CPs), which were formed via the peroxosulfate catalyzed oxidation of pentachlorophenol (PCP) with iron(III)-tetrakis(sulfonatophenyl)porphyrin (Fe(III)-TPPS) in the presence of hydroxypropyl-β -cyclodextrin (HP-β -CD) or HP-γ -CD, were separated by ultrafiltration from the reaction mixture. When the percentages of chlorine species in the reaction mixture were calculated from the concentrations of organic chlorine in the reaction mixture and CPs, 10–25% of chlorine species in the reaction mixture was organic chlorine that was incorporated into CDs. Analyses of the CPs by pyrolysis-GC/MS (Py-GC/MS) and ¹³C NMR showed that the PCP-derived products were covalently incorporated into the CDs. To evaluate the acute toxicity of the CPs, a Microtox® test was examined. Toxicities of the CPs were reduced slightly, compared to the controls (PCP alone and PCP + reaction blanks). In the reaction blanks, mesaconic acid (MA) moieties were detected as a result of the oxidation of CDs in the absence of PCP. Thus, factors in the toxicities, detected in the CPs, can be attributed to the oxidation products derived from CDs, such as MA, as well as the PCP-derived products incorporated into the CDs.     

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Ecotoxicity and biodegradability of antielectrostatic dicephalic cationic surfactants

Four series of dicephalic cationic surfactants, considered as new antielectrostatic agents have been investigated in order to establish their toxicity and biodegradability. Among them N,N-bis[3,3′-(dimethylamine)propyl]alkylamides, N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides, N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dimethylsulphates with different hydrophobic chain length (n-C₉H₁₉ to n-C₁₅H₃₁) and type of counterion (chloride, bromide and methylsulfate) have been studied. The inhibitory effect against microorganisms has been examined using model gram-positive and gram-negative bacteria, and yeasts. None of the tested surfactants have shown antimicrobial activity against gram-negative bacteria (Escherichia coli, Pseudomonas putida) and yeasts (Saccharomyces cerevisiae, Rhodotorula glutinis) at a concentration below 1000 μg mL⁻¹, however some of them were moderately active against gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis). The Microtox® test was successfully applied to measure EC₅₀ values of the studied dicephalic cationic surfactants. Their toxicity to Vibrio fischeri depended upon the alkanoyl chain length with the EC₅₀ values in a range of 2.6-980 mg L⁻¹. N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides 2a-b and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides 3a-b comprising n-decanoyl and n-dodecanoyl hydrophobic tails appeared to be the least toxic. Furthermore, the biodegradability under aerobic conditions of 2a-b, 3a-b was evaluated using OECD Method 301F. According to the obtained results 2a, 3a-3b can be considered as almost readily biodegradable and they are not expected to be persistent in the environment. Additionally, partial biodegradation was observed for 2b, indicating its possible biodegradation in wastewater treatment systems.     

Toxicity of octameric elemental sulphur in aquatic sediments

The proportions of elemental sulphur species in sediment from a contaminated area and a reference sediment sample were compared with the acute toxicity measured in short-term toxicity tests. Octameric elemental sulphur was separated into three operationally defined fractions. Here we show that octameric elemental sulphur contributes to the acute toxicity measured by bioluminescence inhibition. Our findings show that only a small part of extractable elemental sulphur was effective during exposure to the test organisms. A firmly bound fraction of sulphur was found in a contaminated sediment. This information has to be taken into account while interpreting the acute sediment toxicity.     

Ecotoxicological and chemical evaluation of phenolic compounds in industrial effluents

The aim of this paper was to evaluate the ecotoxicological response of industrial effluents containing phenolic compounds. All complex effluents collected from a chemical plant and then after both a chemical–physical and biological treatment were characterised with chemical analysis, biodegradability tests and four ecotoxicological tests (Daphnia magna, Artemia salina, Brachionus plicatilis and Vibrio fisheri with Microtox^®). The evaluation of the chemical and ecotoxicological data was useful for predicting the effect of the raw effluent on the treatment plant and the impact of the final treated effluent on the receiving water. Besides the toxicity of the effluent from the chemical plants, the acute toxicity of its main components was also determined. The results of the tests and toxicity data from literature were transformed in Toxic Units (TUs). Effluent toxicity was under- or over-estimated by calculating the sum of the TUs of the individual components, depending on which toxicity data and test organisms were used.     

Ecotoxicity assessment of slag generated in the process of recycling lead from waste batteries

The aim of this study was to evaluate the possible toxicity of the leachate produced by the residues generated in the process of recycling lead from waste batteries. These residues are slag, which once formed, is characterised by its content in ferrous sulphide, sodium carbonate as well as residual coke from the process. It also contains, as minor components, lead and other heavy metals. The slag was stored and watered periodically over a period of 6 months, its composition changing until finally becoming inert, with no exothermal activity. The slag was leached, and its ecotoxicity was determined by means of the bioluminescence test, along with its content in heavy metals. The results obtained indicate a greater degree of toxicity in the residues with a shorter storage period than the established one, and which were therefore still in the phase of decomposition. However, in the samples taken on completing 6 months of storage, the EC₅₀ value of the leachate was found to be higher than 3000 mg/l. Hence, a storage period under suitable environmental conditions which leads to inactivity of the residue as well as a decrease in its ecotoxicity, is considered absolutely essential. At the same time, a direct relationship was observed between the lead content and the ecotoxicity value.     

Effect of arsenic compounds on Vibrio fischeri light emission and butyrylcholinesterase activity

The effect of organic arsenic compounds and inorganic As(V) and As(III) on Vibrio fischeri luminescence and butyrylcholinesterase activity were evaluated using Microtox and microcalorimetric analysis. Organic arsenic compounds were arsenocholine (AsC), arsenobetaine (AsB), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and the antibiotic 4-hydroxy-3-nitrobenzene arsonic acid (HNAA, Roxarsone^(R)). HNAA, As(III) and As(V) were found to inhibit Vibrio fischeri light emission whereas MMA, DMA, AsC and AsB produced only a slight effect. By contrast, only AsC, AsB and As(III) were found to inhibit butyrylcholinesterase activity. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic (www.research.plymouth.ac.uk/ace).     

Validation of Microtox as a first screening tool for waste classification

The Waste Framework Directive (WFD; 2008/98/EG) describes how waste materials are to be classified as hazardous or not. For complex waste materials chemical analyses are often not conclusive and the WFD provides the possibility to assess the hazardous properties by testing on the waste materials directly. As a methodology WFD refers to the protocols described in the CLP regulation (regulation on Classification, Labeling and Packaging of chemicals) but the toxicity tests on mammals are not acceptable for waste materials. The DISCRISET project was initiated to investigate the suitability of alternative toxicity tests that are already in use in pharmaceutical applications, for the toxicological hazard assessment of complex waste materials. Results indicated that Microtox was a good candidate as a first screening test in a tiered approached hazard assessment. This is now further validated in the present study. The toxic responses measured in Microtox were compared to biological responses in other bioassays for both organic and inorganic fractions of the wastes. Both fractions contribute to the toxic load of waste samples. Results show that the Microtox test is indeed a good and practical screening tool for the organic fraction. A screening threshold (ST) of 5 geq/l as the EC₅₀ value in Microtox is proposed as this ST allows to recognize highly toxic samples in the screening test. The data presented here show that the Microtox toxicity response at this ST is not only predictive for acute toxicity in other organisms but also for sub lethal toxic effects of the organic fraction. This limit value has to be further validated. For the inorganic fraction no specific biotest can be recommended as a screening test, but the use of direct toxicity assessment is also preferable for this fraction as metal speciation is an important issue to define the toxic load of elutriate fractions. A battery of 3 tests (Microtox, Daphnia and Algae) for direct toxicity assessment of this fraction is recommended in literature, but including tests for mechanistic toxicity might be useful.     

Influence of soil ageing on bioavailability and ecotoxicity of lead carried by process waste metallic ultrafine particles

Ultrafine particulate matters enriched with metals are emitted into the atmosphere by industrial activities and can impact terrestrial and aquatic ecosystems. Thus, this study investigated the environmental effects of process particles from a lead-recycling facility after atmospheric deposition on soils and potential run-off to surface waters. The toxicity of lead-enriched PM for ecosystems was investigated on lettuce and bacteria by (i) germination tests, growth assays, lead transfer to plant tissues determination and (ii) Microtox analysis.The influence of ageing and soil properties on metal transfer and ecotoxicity was studied using three different soils and comparing various aged, spiked or historically long-term polluted soils. Finally, lead availability was assessed by 0.01 M CaCl₂ soil extraction.The results showed that process PM have a toxic effect on lettuce seedling growth and on Vibrio fischeri metabolism. Soil-PM interactions significantly influence PM ecotoxicity and bioavailability; the effect is complex and depends on the duration of ageing. Solubilisation or stabilisation processes with metal speciation changes could be involved. Finally, Microtox and phytotoxicity tests are sensitive and complementary tools for studying process PM ecotoxicity.