柴油车加载减速工况烟度排放测试软件开发

依据《柴油车加载减速烟度排放标准》和《柴油车加载减速工况烟度检测计算机控制试验规程》的要求,开发了柴油车加载减速工况烟度排放测试软件。详细介绍了该测试软件的功能和特点。     

地下水环境影响评价中污染物运移模拟软件的适宜性评估

目前国内外已发展了一系列成熟的地下水污染物运移模拟软件,但是软件功能各异,易造成使用者的选择困扰.为满足HJ 610—2016《环境影响评价技术导则地下水环境》（简称“《导则》”）中关于环境影响预测工作精细化的要求,对国内外常用饱和带和包气带污染物运移模拟软件的适宜性进行了评估.首先,针对三款常用饱和带污染物运移模拟软件BIOSCREEN、AT123D和MT3D,基于理想算例对比4组水动力条件设置下的计算结果,分析软件的适宜性;其次,针对《导则》中暂未给出的包气带污染物运移模拟软件,以FEMWATER为例探讨了包气带阻滞作用对于地下水环境影响评价的重要性.结果表明:①BIOSCREEN由于忽略了分子扩散作用,当Pe（Peclet数）为0.25×10-3时,其预测的污染源下游10 m处污染物浓度为AT123D和MT3D计算值的1.8倍,存在高估污染风险的可能.②相比污染源直接设置于潜水面的情景,污染物从距潜水面11 m的地表泄露,经过包气带后污染源强降低了24%,下游85 m处污染物浓度达到0.1 mg/L的时间延迟了390 d.③当地下水流速较慢,分子扩散作用相比对流作用占优势时,适用MT3D开展数值模拟或者采用AT123D进行解析预测;当对流作用占优势且水文地质条件接近解析解假设时,可利用BIOSCREEN粗估污染风险.研究显示,包气带污染物运移模拟软件有助于合理地预测污染物在地下水环境中的运移转化行为,从而更准确地估计污染源强和判定地下水环境污染风险.      

渤海溢油应急预报系统

本文建立的渤海溢油应急预报系统，采用目前比较成熟的环境动力和溢油行为模式，提供海面油膜的位置和覆盖面积，水体中油的浓度分布及溢油的比重，粘度，挥发量，残留量，平均厚度等物化参数的实时预报信息。适用于渤海海域的溢油应急报和环境风险评价。系统界面友好，操作简单，反应快捷，后处理功能完工具有可扩充性。     

集成仿真技术在空间光学遥感器设计中的应用

研究空间光学遥感器集成仿真中将光学、机械、热、控制等学科综合考虑的技术,从系统层面考虑各学科对光学性能指标的影响。综述了目前国外比较先进的光学遥感器集成仿真分析方法,主要包括以JWST为代表的STOP学科软件数据交互法和以NGST为代表的DOCS状态空间法,详细阐述了这些方法的集成方法和建模思路。集成仿真技术的实施开展可以减小产品概念设计和方案阶段论证周期,为总体指标的制定提供可靠依据。集成仿真是空间光学遥感器多学科优化的前提,深度集成和子系统协同仿真是未来的发展趋势。     

基于VB6.0的供水管网震害预测方法和软件

为了提高供水管网震害预测的效率,修订了现有供水管网震害预测模型,应用Visual Basic 6.0软件平台,开发了供水管网震害预测软件。震害预测软件提供了两方面的预测功能,分别为不同地震烈度下供水管段基于三态的破坏等级预测和供水管网基于五态的破坏等级预测。软件实现了批量供水管段及整个管网的震害预测,且可以进行管网在设定地震下的震害预测,提高了预测效率。经算例分析,验证了软件的可靠性。     

Databanks of data sources for environmental chemicals

There exist a vast variety of data sources, either manual sources or computerized databases in the field of environmental chemicals. To facilitate the access and to retrieve the information wanted efficiently, we built up two “databanks of data sources”, one called “Databank of Manual Sources (DMAS)” and the other named “Databank of Databases (DADB)”. The set‐up of these databanks is explained and the load status statistics are shown. DMAS has 164 and DADB 106 hits.     

洪水泥石流等自然灾害对旅游景区的破坏作用研究

通过泥石流灾害模拟模型与灾害损失率计算方法了解旅游景区的损失状况,研究自然灾害对旅游景区的破坏作用。旅游景区洪灾模拟模型由分流模型与汇流模型构成,根据泥石流多相流成分中固液两相分离原则构建泥石流分流模型;引用DEM数据得到泥石流流域栅格的汇流方向,根据经验模型计算汇流用时,采用八方向方法获取河道信息,基于这些数据构建泥石流模拟的汇流模型,采用ArcGis软件实时呈现该模型的泥石流灾害模拟效果;结合ArcGis软件显示的灾情数据,采用洪灾损失率计算方法获取旅游景区自然灾害损失率。实验结果表明,该模型计算旅游景区建筑损失率误差均小于5%,在有效模拟泥石流灾害的同时,可准确描述自然灾害对旅游景区的破坏作用。     

Development and Adoption of a Simple Nonpoint Source Pollution Model for Port Phillip Bay,Australia

New computing tools and approaches allow tailored development of software to meet the needs of environmental managers. The processes required for such tailoring fit well with adaptive management concepts where, as knowledge and system understanding develop among managers, the software can be developed or replaced to match. This paper reports on development and adoption of a simple nonpoint source pollution modeling tool, including technical aspects of data support for modeling and social aspects of software design. The software, named FILTER, used a unit load model to generate expected pollutant loads from subcatchments of Port Phillip Bay, Australia. Monitoring data were used for calibration to modify the delivery of generated pollutants to receiving waters. Spatial, tabular, and charting software components were used to provide alternative forms of output visualization. FILTER was developed using a process that resulted in manager-stakeholders taking responsibility for setting of model parameter values and operation of the user interface, thereby encouraging uptake. The inclusive development process, tailoring of the software to manager needs and styles of usage, and matching of model complexity to data and knowledge, resulted in a successful application that has become the current agreed system representation among disparate stakeholder organizations.     

Fluent软件在地表水源热泵系统温排水数值模拟中的运用

运用Fluent软件对重庆市嘉陵江化龙桥段瑞安新天地江水水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取Fluent中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温升面积和温度梯度。结果表明:在温排水流量为2.0×103 m3/h、温差为4℃的条件下,计算该水域沿水流方向温升超过1℃的最大影响距离为150.4 m,温升超过1℃的水域面积约为1 525 m2,为模拟江水面积的8.59%。选取1℃温升值作为温升带的边界控制值,并在热泵系统最大负荷工况下,根据W=Q×ΔT计算研究水域热环境容量为19.402 m3.℃/s,剩余热环境容量为17.736 m3.℃/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。     

Qualidex – A New Software for Generating Water Quality Indice

Water quality indice are necessary for resolving lengthy, multi-parameter, water analysis reports into single digit scores. This, in turn, is essential for comparing the water quality of different sources and in monitoring the changes in the water quality of a given source as a function of time and other influencing factors.In this paper we present the computer-automated tool QUALIDEX (water QUALIty inDEX), which has been developed by us to generate and operate water quality indice. Several popular indice – such as the Oregon Water Quality Index developed in the 1970s by Oregon Department of Environmental Quality and later updated in 1995, the Aquatic Toxicity Index developed by Wepener and coworkers for protection of aquatic life at the Olifants river, Kruger National Park, South Africa, the water quality index developed by Dinius in 1987, the Overall Index of Pollution (of surface waters) developed at the National Environmental Engineering Research Institute (NEERI), and the water quality index of the Central Pollution Control Board (CPCB) – have also been added to QUALIDEX in modular form. There is also a New water quality index sub-module which enables the user to generate his or her own index and compare its performance with these well-known indice. The package is also capable of analyzing the variations in the water quality of different sites at different times. The software has been coded in Visual C++ and has been integrated with MS Access database.